The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Electrochemical behavior and passivation of current collectors in lithium-ion batteries
Abstract
This paper examines several metals that are commonly employed as current collectors of positive and negative electrodes for rechargeable lithium batteries. Current collectors must be electrochemically stable when in contact with the cell component during the potential operation window of an electrode. Various electrochemical techniques have been used to investigate the corrosion of current collector materials. In practice, continued corrosion of current collectors leads to a gradual increase in the internal resistance of cells, which causes the capacity to fade gradually. Corrosion of the current collector may induce a short-circuit, affecting its safety. Thus, the formation of thick and compact, protective passive film on the metal surface is highly important so as to ensure battery performance and safety. Depending on the salts and additives, different types of protective films are formed. The solubility of these surface layers in the electrolyte is a determining factor in the overall stability of the current collector. In this review, we introduce the electrochemical behavior and protective film formation processes of various metallic current collectors in representative electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Self-citationEnvironmental Factors Affecting the Critical Potential for Pitting in 18–8 Stainless Steel
Leckie, H. P., & Uhlig, H. H. (1966) · Journal of The Electrochemical Society · doi:10.1149/1.2423801 · Cited by 672
Failure and Stabilization Mechanisms of Graphite Electrodes
Aurbach, D., Levi, M. D., Levi, E., & Schechter, A. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp962815t · Cited by 450
LiBOB as Salt for Lithium-Ion Batteries:A Possible Solution for High Temperature Operation
Xu, K., Zhang, S., Jow, T. R., Xu, W., & Angell, C. A. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1426042 · Cited by 412
Krause, L. J., Lamanna, W. M., Summerfield, J. H., Engle, M., Korba, G. A., Loch, R., & Atanasoski, R. T. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02517-2 · Cited by 404
Aluminum corrosion in electrolyte of Li-ion battery
Zhang, S. S., & Jow, T. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00110-6 · Cited by 286
Morita, M., Shibata, T., Yoshimoto, N., & Ishikawa, M. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00164-0 · Cited by 228
Wang, X., Yasukawa, E., & Mori, S. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00429-6 · Cited by 218
Cited by
Jia, X., Liu, C., Neale, Z. G., Yang, J., & Cao, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00628 · Cited by 1,791
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Li, J., Fleetwood, J., Hawley, W. B., & Kays, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00565 · Cited by 895
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Safer Electrolytes for Lithium‐Ion Batteries: State of the Art and Perspectives
Kalhoff, J., Eshetu, G. G., Bresser, D., & Passerini, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500284 · Cited by 877
Recycling and environmental issues of lithium-ion batteries: Advances, challenges and opportunities
Costa, C. M., Barbosa, J. C., Gonçalves, R., Castro, H., Campo, F. J. D., & Lanceros-Méndez, S. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.02.032 · Cited by 611
Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S
Younesi, R., Veith, G. M., Johansson, P., Edström, K., & Vegge, T. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01215e · Cited by 600
A review of current collectors for lithium-ion batteries
Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229321 · Cited by 523
Gilbert, J. A., Shkrob, I. A., & Abraham, D. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1111702jes · Cited by 493
A cyclic phosphate-based battery electrolyte for high voltage and safe operation
Zheng, Q., Yamada, Y., Shang, R., Ko, S., Lee, Y.-Y., Kim, K., Nakamura, E., & Yamada, A. (2020) · Nature Energy · doi:10.1038/s41560-020-0567-z · Cited by 469
Liquid electrolyte development for low-temperature lithium-ion batteries
Hubble, D., Brown, D. E., Zhao, Y., Fang, C., Lau, J., McCloskey, B. D., & Liu, G. (2022) · Energy & Environmental Science · doi:10.1039/d1ee01789f · Cited by 462
A review on various temperature-indication methods for Li-ion batteries
Raijmakers, L. H. J., Danilov, D. L., Eichel, R.-A., & Notten, P. H. L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.078 · Cited by 424
Concentrated electrolytes: decrypting electrolyte properties and reassessing Al corrosion mechanisms
McOwen, D. W., Seo, D. M., Borodin, O., Vatamanu, J., Boyle, P. D., & Henderson, W. A. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42351d · Cited by 417
Ultrathin Graphite Foam: A Three-Dimensional Conductive Network for Battery Electrodes
Ji, H., Zhang, L., Pettes, M. T., Li, H., Chen, S., Shi, L., Piner, R., & Ruoff, R. S. (2012) · Nano Letters · doi:10.1021/nl300528p · Cited by 410
Wang, Y., & Zhong, W. (2015) · ChemElectroChem · doi:10.1002/celc.201402277 · Cited by 410
Electrochemistry and Solid‐State Chemistry of NaMeO2 (Me = 3d Transition Metals)
Kubota, K., Kumakura, S., Yoda, Y., Kuroki, K., & Komaba, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703415 · Cited by 399
Comprehensive review of lithium-ion battery materials and development challenges
Nasajpour-Esfahani, N., Garmestani, H., Bagheritabar, M., Jasim, D. J., Toghraie, D., Dadkhah, S., & Firoozeh, H. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114783 · Cited by 374
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Two-Dimensional Materials to Address the Lithium Battery Challenges
Rojaee, R., & Shahbazian-Yassar, R. (2020) · ACS Nano · doi:10.1021/acsnano.9b08396 · Cited by 344
The Many Deaths of Supercapacitors: Degradation, Aging, and Performance Fading
Pameté, E., Köps, L., Kreth, F. A., Pohlmann, S., Varzi, A., Brousse, T., Balducci, A., & Presser, V. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301008 · Cited by 328
Zhang, C., Ma, J., Wu, L., Sun, J., Wang, L., Li, T., & Waite, T. D. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.0c06552 · Cited by 323
In situ polymerization of solid-state polymer electrolytes for lithium metal batteries: a review
Zou, S., Yang, Y., Wang, J., Zhou, X., Wan, X., Zhu, M., & Liu, J. (2024) · Energy & Environmental Science · doi:10.1039/d4ee00822g · Cited by 305
Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries
Massé, R. C., Uchaker, E., & Cao, G. (2015) · Science China Materials · doi:10.1007/s40843-015-0084-8 · Cited by 292
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Bhide, A., Hofmann, J., Katharina Dürr, A., Janek, J., & Adelhelm, P. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53077a · Cited by 275
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
The Aluminum-Ion Battery: A Sustainable and Seminal Concept?
Leisegang, T., Meutzner, F., Zschornak, M., Münchgesang, W., Schmid, R., Nestler, T., Eremin, R. A., Kabanov, A. A., Blatov, V. A., & Meyer, D. C. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00268 · Cited by 254
Pretreatment options for the recycling of spent lithium-ion batteries: A comprehensive review
Yu, D., Huang, Z., Makuza, B., Guo, X., & Tian, Q. (2021) · Minerals Engineering · doi:10.1016/j.mineng.2021.107218 · Cited by 254
Metadata
- Authors
- Myung, S.-T., Hitoshi, Y., & Sun, Y.-K.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 27
- Pages
- 9891
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2104232665
- Cited by
- 402
- References
- 24
- FWCI
- 9.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.