Effect of pore size on carbon dioxide sorption by carbide derived carbon
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
CO2 sorption at atmospheric and sub-atmospheric pressures is a key step towards carbon capture and sequestration (CCS) and materials capable of fast and efficient CO2 uptake are currently being studied extensively. Carbide-derived carbons (CDCs) show a very high sorption capacity for CO2 of up to 7.1 mol/kg at 0 °C and ambient pressure. This value is significantly higher than other carbon materials. Systematic experimental investigation of a large number of different CDCs derived from nano- and micrometer sized precursors with and without activation show a linear correlation between the CO2 uptake at a certain pressure and the pore volume. However, CO2 sorption is not limited by the total pore volume but only by pores smaller than a certain diameter. At 1 bar, pores smaller than 0.8 nm contribute the most to the CO2 uptake and at 0.1 bar pores smaller or equal to 0.5 nm are preferred. With lower total pressure, smaller pores contribute more to the measured amount of adsorbed CO2. The prediction of the CO2 uptake based on the pore volume for pores of a certain diameter is much more accurate than predictions based on the mean pore size or the specific surface area. This study provides guidelines for the design of materials with an improved ability to remove carbon dioxide from the environment at atmospheric and lower pressures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [22]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Self-citationRecommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
The reaction of CO2 with ethanolamines
Danckwerts, P. V. (1979) · Chemical Engineering Science · doi:10.1016/0009-2509(79)85087-3 · Cited by 1,116
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Carbide‐Derived Carbons – From Porous Networks to Nanotubes and Graphene
Presser, V., Heon, M., & Gogotsi, Y. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002094 · Cited by 678
Self-citationCan Metal–Organic Framework Materials Play a Useful Role in Large‐Scale Carbon Dioxide Separations?
Keskin, S., van Heest, T. M., & Sholl, D. S. (2010) · ChemSusChem · doi:10.1002/cssc.201000114 · Cited by 610
Yazaydın, A. Ö., Benin, A. I., Faheem, S. A., Jakubczak, P., Low, J. J., Willis, R. R., & Snurr, R. Q. (2009) · Chemistry of Materials · doi:10.1021/cm900049x · Cited by 588
Adsorption of carbon dioxide at high temperature—a review
YONG, Z., MATA, V, & RODRIGUES, A. (2002) · Separation and Purification Technology · doi:10.1016/s1383-5866(01)00165-4 · Cited by 486
Characterization of nanoporous materials from adsorption and desorption isotherms
Ravikovitch, P. I., & Neimark, A. V. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00614-8 · Cited by 433
Carbide‐Derived Carbons: Effect of Pore Size on Hydrogen Uptake and Heat of Adsorption
Yushin, G., Dash, R., Jagiello, J., Fischer, J. E., & Gogotsi, Y. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500830 · Cited by 402
Self-citationUsefulness of CO2 adsorption at 273 K for the characterization of porous carbons
Lozano-Castelló, D., Cazorla-Amorós, D., & Linares-Solano, A. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.037 · Cited by 399
Titanium carbide derived nanoporous carbon for energy-related applications
Dash, R., Chmiola, J., Yushin, G., Gogotsi, Y., Laudisio, G., Singer, J., Fischer, J., & Kucheyev, S. (2006) · Carbon · doi:10.1016/j.carbon.2006.04.035 · Cited by 392
Self-citationDensity Functional Theory Model of Adsorption on Amorphous and Microporous Silica Materials
Ravikovitch, P. I., & Neimark, A. V. (2006) · Langmuir · doi:10.1021/la0616146 · Cited by 370
CO2 adsorption in single-walled carbon nanotubes
Cinke, M., Li, J., Bauschlicher, C. W., Ricca, A., & Meyyappan, M. (2003) · Chemical Physics Letters · doi:10.1016/s0009-2614(03)01124-2 · Cited by 365
Tailoring of Nanoscale Porosity in Carbide-Derived Carbons for Hydrogen Storage
Gogotsi, Y., Dash, R. K., Yushin, G., Yildirim, T., Laudisio, G., & Fischer, J. E. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0550529 · Cited by 334
Self-citationRavikovitch, P. I., Vishnyakov, A., & Neimark, A. V. (2001) · Physical Review E · doi:10.1103/physreve.64.011602 · Cited by 329
Photochemical Removal of Mercury from Flue Gas
Granite, E. J., & Pennline, H. W. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020251b · Cited by 322
Separation of Carbon Dioxide from Natural Gas Mixtures through Polymeric Membranes—A Review
Sridhar, S., Smitha, B., & Aminabhavi, T. M. (2007) · Separation & Purification Reviews · doi:10.1080/15422110601165967 · Cited by 309
Zhang, J., Webley, P. A., & Xiao, P. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.06.007 · Cited by 298
Importance of pore size in high-pressure hydrogen storage by porous carbons
Gogotsi, Y., Portet, C., Osswald, S., Simmons, J. M., Yildirim, T., Laudisio, G., & Fischer, J. E. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.073 · Cited by 265
Self-citationModeling the structural evolution of carbide-derived carbons using quenched molecular dynamics
Palmer, J. C., Llobet, A., Yeon, S.-H., Fischer, J. E., Shi, Y., Gogotsi, Y., & Gubbins, K. E. (2010) · Carbon · doi:10.1016/j.carbon.2009.11.033 · Cited by 220
Self-citationStudy of CO2 Absorption and Desorption in a Packed Column
Yeh, J. T., Pennline, H. W., & Resnik, K. P. (2001) · Energy & Fuels · doi:10.1021/ef0002389 · Cited by 206
Pennline, H. W., Luebke, D. R., Jones, K. L., Myers, C. R., Morsi, B. I., Heintz, Y. J., & Ilconich, J. B. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.02.002 · Cited by 186
Enhanced methane storage of chemically and physically activated carbide-derived carbon
Yeon, S., Osswald, S., Gogotsi, Y. G., Singer, J. P., Simmons, J. M., Fischer, J. E., Lillo-Ródenas, M. A., & Linares-Solano, A. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.019 · Cited by 120
Self-citationCapacitance of KOH activated carbide-derived carbons
Portet, C., Lillo-Ródenas, M. A., Linares-Solano, A., & Gogotsi, Y. G. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b816514a · Cited by 91
Self-citationRemoval and recovery of compressed CO2 from flue gas by a novel thermal swing chemisorption process
Lee, K. B., & Sircar, S. (2008) · AIChE Journal · doi:10.1002/aic.11531 · Cited by 85
Enhanced volumetric hydrogen and methane storage capacity of monolithic carbide-derived carbon
Yeon, S., Knoke, I., Gogotsi, Y. G., & Fischer, J. E. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.02.002 · Cited by 72
Self-citationCO2 sorption in activated carbon in the presence of water
Sun, Y. J., Wang, Y., Zhang, Y., Zhou, Y., & Zhou, L. (2007) · Chemical Physics Letters · doi:10.1016/j.cplett.2007.02.008 · Cited by 63
N2 and CO2 adsorption on activated carbon fibres prepared from Nomex chars
Blanco‐López, M. C., Martínez-Alonso, A., & Tascón, J. M. D. (2000) · Carbon · doi:10.1016/s0008-6223(99)00244-4 · Cited by 48
Diffusion-Controlled Hysteresis
Ravikovitch, P. I., & Neimark, A. V. (2005) · Adsorption · doi:10.1007/s10450-005-5935-2 · Cited by 36
ZareNezhad, B., & Hosseinpour, N. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.02.016 · Cited by 26
Tin(IV) complexes with 2-methoxy-2′-hydroxy chalkones
BIRADAR, N. S., Patil, B. R., & KULKARNI, V. H. (1976) · Inorganica Chimica Acta · doi:10.1016/s0020-1693(00)94112-4 · Cited by 7
Cited by
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
A search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Metadata
- Authors
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y.
- Affiliations
- Drexel University (US)
- Korea Institute of Energy Research (KR)
- Corresponding author
- Gogotsi, Yury
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3059
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170455260
- Cited by
- 668
- References
- 38
- Citations by year
- 2026: 36 · 2025: 43 · 2024: 39 · 2023: 42 · 2022: 65 · 2021: 47 · 2020: 43 · 2019: 57 · 2018: 56 · 2017: 57 · 2016: 55 · 2015: 47 · 2014: 35 · 2013: 31 · 2012: 13
- FWCI
- 45.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- carbide-derived carbon, CO2 sorption, pore size, carbon capture and storage, sub-atmospheric pressure, pore volume, micropores, activation, specific surface area, CO2 adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.