The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Abstract
CO2 sorption at atmospheric and sub-atmospheric pressures is a key step towards carbon capture and sequestration (CCS) and materials capable of fast and efficient CO2 uptake are currently being studied extensively. Carbide-derived carbons (CDCs) show a very high sorption capacity for CO2 of up to 7.1 mol/kg at 0 °C and ambient pressure. This value is significantly higher than other carbon materials. Systematic experimental investigation of a large number of different CDCs derived from nano- and micrometer sized precursors with and without activation show a linear correlation between the CO2 uptake at a certain pressure and the pore volume. However, CO2 sorption is not limited by the total pore volume but only by pores smaller than a certain diameter. At 1 bar, pores smaller than 0.8 nm contribute the most to the CO2 uptake and at 0.1 bar pores smaller or equal to 0.5 nm are preferred. With lower total pressure, smaller pores contribute more to the measured amount of adsorbed CO2. The prediction of the CO2 uptake based on the pore volume for pores of a certain diameter is much more accurate than predictions based on the mean pore size or the specific surface area. This study provides guidelines for the design of materials with an improved ability to remove carbon dioxide from the environment at atmospheric and lower pressures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [22]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Self-citationRecommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
The reaction of CO2 with ethanolamines
Danckwerts, P. V. (1979) · Chemical Engineering Science · doi:10.1016/0009-2509(79)85087-3 · Cited by 1,116
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Cited by
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
A search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Wickramaratne, N. P., Xu, J., Wang, M., Zhu, L., Dai, L., & Jaroniec, M. (2014) · Chemistry of Materials · doi:10.1021/cm5001895 · Cited by 576
Porada, S., Borchardt, L., Oschatz, M., Bryjak, M., Atchison, J. S., Keesman, K. J., Kaskel, S., Biesheuvel, P. M., & Presser, V. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42209g · Cited by 571
Self-citationTo, J. W. F., He, J., Mei, J., Haghpanah, R., Chen, Z., Kurosawa, T., Chen, S., Bae, W.-G., Pan, L., Tok, J. B.-H., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11955 · Cited by 475
Activated Carbon Spheres for CO2 Adsorption
Wickramaratne, N. P., & Jaroniec, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400112m · Cited by 445
Water Desalination Using Capacitive Deionization with Microporous Carbon Electrodes
Porada, S., Weinstein, L., Dash, R., van der Wal, A., Bryjak, M., Gogotsi, Y., & Biesheuvel, P. M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201683j · Cited by 443
Self-citationPorous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
MXenes for Rechargeable Batteries Beyond the Lithium‐Ion
Ming, F., Liang, H., Huang, G., Bayhan, Z., & Alshareef, H. N. (2021) · Advanced Materials · doi:10.1002/adma.202004039 · Cited by 424
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.006 · Cited by 393
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Biomass derived low-cost microporous adsorbents for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.01.032 · Cited by 300
Review of biochar role as additive in anaerobic digestion processes
Chiappero, M., Norouzi, O., Hu, M., Demichelis, F., Berruti, F., Di Maria, F., Mašek, O., & Fiore, S. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110037 · Cited by 294
Gupta, S., & Kua, H. W. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001924 · Cited by 293
Activated carbon preparation from biomass feedstock: Clean production and carbon dioxide adsorption
Ahmed, M. B., Hasan Johir, M. A., Zhou, J. L., Ngo, H. H., Nghiem, L. D., Richardson, C., Moni, M. A., & Bryant, M. R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.342 · Cited by 281
“This could have resulted from KOH activation etching the carbon surface (Macwan et al., 2011; Presser et al., 2011; Thommes et al., 2015) and justify its”
BackgroundSustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
“7 nm is more favorable for adsorption processes (Presser et al. 2011; Kumar et al. 2020).”
BackgroundSaha, D., & Kienbaum, M. J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.05.051 · Cited by 275
Deng, S., Wei, H., Chen, T., Wang, B., Huang, J., & Yu, G. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.115 · Cited by 273
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Hug, S., Stegbauer, L., Oh, H., Hirscher, M., & Lotsch, B. V. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03330 · Cited by 267
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Selective adsorption of carbon dioxide by carbonized porous aromatic framework (PAF)
Ben, T., Li, Y., Zhu, L., Zhang, D., Cao, D., Xiang, Z., Yao, X., & Qiu, S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21935b · Cited by 257
Biomass derived nitrogen and sulfur co-doped porous carbons for efficient CO2 adsorption
Ma, C., Lu, T., Shao, J., Huang, J., Hu, X., & Wang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119899 · Cited by 257
Li, J., Michalkiewicz, B., Min, J., Ma, C., Chen, X., Gong, J., Mijowska, E., & Tang, T. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.204 · Cited by 250
Ashourirad, B., Sekizkardes, A. K., Altarawneh, S., & El-Kaderi, H. M. (2015) · Chemistry of Materials · doi:10.1021/cm504435m · Cited by 245
Zhang, C., Song, W., Ma, Q., Xie, L., Zhang, X., & Guo, H. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02764 · Cited by 244
Rational design of tailored porous carbon-based materials for CO2 capture
Zhang, Z., Cano, Z. P., Luo, D., Dou, H., Yu, A., & Chen, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07297g · Cited by 238
Plaza, M. G., González, A. S., Pis, J. J., Rubiera, F., & Pevida, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.09.058 · Cited by 233
Effect of the porous structure in carbon materials for CO2 capture at atmospheric and high-pressure
Casco, M. E., Martínez-Escandell, M., Silvestre-Albero, J., & Rodríguez-Reinoso, F. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.086 · Cited by 223
“6 nm, in close agreement with previous analysis described in the literature [5–7,18].”
BackgroundResultInfluentialJiang, Y., Tan, P., Qi, S., Liu, X., Yan, J., Fan, F., & Sun, L. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900141 · Cited by 217
Choi, S. W., Tang, J., Pol, V. G., & Lee, K. B. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.12.005 · Cited by 213
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100045 · Cited by 208
Rehman, A., Heo, Y.-J., Nazir, G., & Park, S.-J. (2021) · Carbon · doi:10.1016/j.carbon.2020.09.088 · Cited by 203
Highly porous nitrogen-doped polyimine-based carbons with adjustable microstructures for CO2 capture
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11995e · Cited by 201
Wang, J., Chen, B., & Xing, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04865 · Cited by 200
Sánchez-Sánchez, Á., Suárez-García, F., Martínez-Alonso, A., & Tascón, J. M. D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506176e · Cited by 198
Ma, C., Bai, J., Demir, M., Hu, X., Liu, S., & Wang, L. (2022) · Fuel · doi:10.1016/j.fuel.2022.125119 · Cited by 198
Liu, R., Shi, X., Wang, C., Gao, Y., Xu, S., Hao, G., Chen, S., & Lu, A. (2021) · ChemSusChem · doi:10.1002/cssc.202002677 · Cited by 194
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Yang, M., Guo, L., Hu, G., Hu, X., Xu, L., Chen, J., Dai, W., & Fan, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01311 · Cited by 193
Alhwaige, A. A., Ishida, H., & Qutubuddin, S. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01323 · Cited by 192
Sevilla, M., Al-Jumialy, A. S. M., Fuertes, A. B., & Mokaya, R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10433 · Cited by 189
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Challenges and Opportunities: Metal–Organic Frameworks for Direct Air Capture
Bose, S., Sengupta, D., Rayder, T. M., Wang, X., Kirlikovali, K. O., Sekizkardes, A. K., Islamoglu, T., & Farha, O. K. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202307478 · Cited by 187
Kim, C., Srimuk, P., Lee, J., Fleischmann, S., Aslan, M., & Presser, V. (2017) · Carbon · doi:10.1016/j.carbon.2017.06.077 · Cited by 185
Self-citationNovel porous carbon materials with ultrahigh nitrogen contents for selective CO2 capture
Zhao, Y., Zhao, L., Yao, K. X., Yang, Y., Zhang, Q., & Han, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33091a · Cited by 184
Supercapacitors based on carbons with tuned porosity derived from paper pulp mill sludge biowaste
Wang, H., Li, Z., Tak, J. K., Holt, C. M. B., Tan, X., Xu, Z., Amirkhiz, B. S., Harfield, D., Anyia, A., Stephenson, T., et al. (2013) · Carbon · doi:10.1016/j.carbon.2013.01.079 · Cited by 184
“The weighted mean micropore size (Dmean) was calculated from [21]:”
BackgroundMethodStructure and Electrochemical Performance of Carbide‐Derived Carbon Nanopowders
Pérez, C. R., Yeon, S., Ségalini, J., Presser, V., Taberna, P., Simon, P., & Gogotsi, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200695 · Cited by 182
Self-citationRehman, A., Nazir, G., Yop Rhee, K., & Park, S.-J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130421 · Cited by 180
Activated carbons—preparation, characterization and their application in CO2 capture: A review
Serafin, J., & Dziejarski, B. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28023-9 · Cited by 179
Graphene oxide derived carbons (GODCs): synthesis and gas adsorption properties
Srinivas, G., Burress, J., & Yildirim, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21100a · Cited by 179
Carbon doping of hexagonal boron nitride porous materials toward CO2 capture
Chen, S., Li, P., Xu, S., Pan, X., Fu, Q., & Bao, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08515j · Cited by 178
Zhou, D.-D., Zhang, X.-W., Mo, Z.-W., Xu, Y.-Z., Tian, X.-Y., Li, Y., Chen, X.-M., & Zhang, J.-P. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100016 · Cited by 178
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Bai, R., Yang, M., Hu, G., Xu, L., Hu, X., Li, Z., Wang, S., Dai, W., & Fan, M. (2015) · Carbon · doi:10.1016/j.carbon.2014.09.079 · Cited by 177
“[35] Presser V, McDonough J, Yeon SH, Gogotsi Y.”
BackgroundA review of CO2 adsorbents performance for different carbon capture technology processes conditions
Lai, J. Y., Ngu, L. H., & Hashim, S. S. (2021) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.2112 · Cited by 176
Zhang, S., Zheng, M., Tang, Y., Zang, R., Zhang, X., Huang, X., Chen, Y., Yamauchi, Y., Kaskel, S., & Pang, H. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204714 · Cited by 175
Recent advances and progress in the development of graphene-based adsorbents for CO2 capture
Balasubramanian, R., & Chowdhury, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04822b · Cited by 174
Novel Nitrogen-Doped Porous Carbons Derived from Graphene for Effective CO2 Capture
An, L., Liu, S., Wang, L., Wu, J., Wu, Z., Ma, C., Yu, Q., & Hu, X. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b06122 · Cited by 173
Samanta, S., & Srivastava, R. (2020) · Materials Advances · doi:10.1039/d0ma00293c · Cited by 170
Activated carbons and amine-modified materials for carbon dioxide capture — a review
Chen, Z., Deng, S., Wei, H., Wang, B., Huang, J., & Yu, G. (2013) · Frontiers of Environmental Science & Engineering · doi:10.1007/s11783-013-0510-7 · Cited by 167
“The enlarged pores resulted in the decrease of CO2 adsorption on the AC, and the pore volume below 1 nm was mainly responsible for CO2 adsorption on the AC at normal pressure [46].”
BackgroundInfluentialSurface modifications of carbonaceous materials for carbon dioxide adsorption: A review
Chiang, Y.-C., & Juang, R.-S. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.12.014 · Cited by 166
A comprehensive review of carbon capture science and technologies
Wu, C., Huang, Q., Xu, Z., Sipra, A. T., Gao, N., Vandenberghe, L. P. D. S., Vieira, S., Soccol, C. R., Zhao, R., Deng, S., et al. (2024) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2023.100178 · Cited by 165
Rehman, A., & Park, S.-J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.063 · Cited by 164
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400059t · Cited by 163
Pine cone shell-based activated carbon used for CO 2 adsorption
Li, K., Tian, S., Jiang, J., Wang, J., Chen, X., & Yan, F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09908k · Cited by 165
Carbonaceous materials as adsorbents for CO2 capture: synthesis and modification
Gao, X., Yang, S., Hu, L., Cai, S., Wu, L., & Kawi, S. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100039 · Cited by 159
He, J., To, J. W. F., Psarras, P. C., Yan, H., Atkinson, T., Holmes, R. T., Nordlund, D. L., Bao, Z., & Wilcox, J. L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502491 · Cited by 157
Development of biomass derived highly porous fast adsorbents for post-combustion CO2 capture
Sher, F., Iqbal, S. Z., Albazzaz, S., Ali, U., Mortari, D. A., & Rashid, T. (2020) · Fuel · doi:10.1016/j.fuel.2020.118506 · Cited by 157
Zhou, J. P., Li, Z., Xing, W., Shen, H., Bi, X., Zhu, T., Qiu, Z., & Zhuo, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601904 · Cited by 156
Pandey, G. P., Liu, T., Hancock, C., Li, Y., Sun, X. S., & Li, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.032 · Cited by 155
Water caltrop shell-derived nitrogen-doped porous carbons with high CO2 adsorption capacity
Zhao, Z., Ma, C., Chen, F., Xu, G., Pang, R., Qian, X., Shao, J., & Hu, X. D. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2021.105969 · Cited by 155
Emerging Trends in Sustainable CO 2 ‐Management Materials
Zhang, Z., Zheng, Y. H., Qian, L., Luo, D., Dou, H., Wen, G., Yu, A., & Chen, Z. (2022) · Advanced Materials · doi:10.1002/adma.202201547 · Cited by 189
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X. D., Wang, L., Zhao, Y., Lin, Y., Sun, Y. J., DaCosta, H. F. M., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 161
A novel activating strategy to achieve highly porous carbon monoliths for CO 2 capture
Ma, X., Li, Y., Cao, M., & Hu, C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14684g · Cited by 148
Chen, D., Fu, Y., Yu, W., Yu, G., & Pan, C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.133 · Cited by 147
Lee, J. H., Lee, H. J., Lim, S. Y., Kim, B. G., & Choi, J. W. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03579 · Cited by 146
Efficient nitrogen doped porous carbonaceous CO2 adsorbents based on lotus leaf
Li, Q., Liu, S., Wang, L., Chen, F., Shao, J., & Hu, X. D. (2020) · Journal of Environmental Sciences · doi:10.1016/j.jes.2020.11.008 · Cited by 144
Adeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
Sulfur-Doped porous carbon Adsorbent: A promising solution for effective and selective CO2 capture
Bai, J., Shao, J., Yu, Q., Demir, M., Altay, B. N., Ali, T. M., Jiang, Y., Wang, L., & Hu, X. D. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147667 · Cited by 142
Development of a cost-effective CO2 adsorbent from petroleum coke via KOH activation
Jang, E., Choi, S. W., Hong, S. M., Shin, S., & Lee, K. B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.08.075 · Cited by 142
Anomalous or regular capacitance? The influence of pore size dispersity on double-layer formation
Jäckel, N., Rodner, M., Schreiber, A., Jeongwook, J., Zeiger, M., Aslan, M., Weingarth, D., & Presser, V. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.015 · Cited by 142
Self-citationWei, H., Chen, J., Fu, N., Chen, H., Lin, H., & Han, S. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2017.12.192 · Cited by 139
Preparation of activated biomass carbon from pine sawdust for supercapacitor and CO 2 capture
Quan, C., Su, R., & Gao, N. (2020) · International Journal of Energy Research · doi:10.1002/er.5206 · Cited by 139
Yang, S. J., Antonietti, M., & Fechler, N. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04500 · Cited by 137
Mohanty, A. K., Vivekanandhan, S., Das, O., Millán, L. M. R., Klinghoffer, N. B., Nzihou, A., & Misra, M. (2024) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00297-4 · Cited by 145
“The thermal treatment of amorphous or turbostratic carbon above 1,000 °C for prolonged residence times to transform carbon to a more ordered form.”
Metadata
- Authors
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y.
- Affiliations
- Drexel University (US)
- Korea Institute of Energy Research (KR)
- Corresponding author
- Gogotsi, Yury
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3059
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170455260
- Cited by
- 668
- References
- 38
- Citations by year
- 2026: 36 · 2025: 43 · 2024: 39 · 2023: 42 · 2022: 65 · 2021: 47 · 2020: 43 · 2019: 57 · 2018: 56 · 2017: 57 · 2016: 55 · 2015: 47 · 2014: 35 · 2013: 31 · 2012: 13
- FWCI
- 45.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- carbide-derived carbon, CO2 sorption, pore size, carbon capture and storage, sub-atmospheric pressure, pore volume, micropores, activation, specific surface area, CO2 adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.