CoChat

High Pt loading on functionalized multiwall carbon nanotubes as a highly efficient cathode electrocatalyst for proton exchange membrane fuel cells

Fang, Baizeng, Kim, Min-Sik, Kim, Jung Ho, Song, Min Young, Wang, Yan-Jie, Wang, Haijiang, Wilkinson, David P., Yu, Jong-Sung · 2011 · Journal of Materials Chemistry

The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.

Abstract

A very efficient, reproducible approach has been developed to fabricate a multiwall carbon nanotube (MWCNT)-supported, high Pt loading electrocatalyst. In this strategy, MWCNT was first functionalized with an anionic surfactant, sodium dodecylsulfate (SDS), to enhance the hydrophilicity of the MWCNTs for high Pt loading. The SDS-modified MWCNTs were further used to support high loading of Pt nanoparticles (NPs) through a urea-assisted homogeneous deposition (HD) strategy, followed by reduction using ethylene glycol (EG) as the precursor of a reducing agent. Through the input of SDS on the MWCNTs, Pt complex species can be readily anchored on the outer surface of the MWCNTs, while in situ pH adjustment of the solution with urea and reduction by EG enable the Pt NPs to disperse very uniformly on the SDS–MWCNT support with small particles size. Due to its unique structural characteristics, such as high electronic conductivity, the one-dimensional nanotube structure favouring fast electron transfer and more uniform Pt NP dispersion on the support with smaller particle size, the SDS-MWCNT-supported Pt (60 wt%) catalyst considerably outperformed a commercially available Johnson Matthey catalyst with the same Pt loading supported on Vulcan carbon black, when they were each employed as a cathode catalyst in proton exchange membrane fuel cells.

Overview

Integrity signals

Registry

Crossref · 10.1039/c1jm10847f

Cites

47 of 47 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 1

  1. Guo, 2004, J. Electroanal. Chem., 573, 197

Cited by

See all 89

Metadata

Authors
Fang, B., Kim, M.-S., Kim, J. H., Song, M. Y., Wang, Y.-J., Wang, H., Wilkinson, D. P., & Yu, J.-S.
Affiliations
  • University of British Columbia (CA)
  • Korea University (KR)
  • National Research Council Canada (CA)
Corresponding author
  • Wang, Haijiang
  • Wilkinson, David P.
  • Yu, Jong-Sung
Venue
Journal of Materials Chemistry
Published
2011
Volume
21
Issue
22
Pages
8066
ISSN
  • 0959-9428 (ISSN-L)
  • 1364-5501
OpenAlex
W1999292461
Cited by
89
References
47
Citations by year
2026: 1 · 2025: 2 · 2024: 3 · 2023: 1 · 2022: 7 · 2021: 7 · 2020: 2 · 2019: 6 · 2018: 4 · 2017: 3 · 2016: 8 · 2015: 9 · 2014: 12 · 2013: 8 · 2012: 13
FWCI
4.79
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of Materials Chemistry (publishedVersion)
  • NPARC (submittedVersion)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
Keywords
multi-walled carbon nanotubes, platinum nanoparticles, cathode catalysts, proton exchange membrane fuel cells, ethylene glycol reduction, catalyst supports, platinum dispersion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.