The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Hydrogen-evolution characteristics of Ni–Mo-coated, radial junction, n+p-silicon microwire array photocathodes
Abstract
The photocathodic H2-evolution performance of Ni–Mo-coated radial n+p junction Si microwire (Si MW) arrays has been evaluated on the basis of thermodynamic energy-conversion efficiency as well as solar cell figures of merit. The Ni–Mo-coated n+p-Si MW electrodes yielded open-circuit photovoltages (Voc) of 0.46 V, short-circuit photocurrent densities (Jsc) of 9.1 mA cm−2, and thermodynamically based energy-conversion efficiencies (η) of 1.9% under simulated 1 Sun illumination. Under nominally the same conditions, the efficiency of the Ni–Mo-coated system was comparable to that of Pt-coated n+p-Si MW array photocathodes (Voc = 0.44 V, Jsc = 13.2 mA cm−2, η = 2.7%). This demonstrates that, at 1 Sun light intensity on high surface area microwire arrays, earth-abundant electrocatalysts can provide performance comparable to noble-metal catalysts for photoelectrochemical hydrogen evolution. The formation of an emitter layer on the microwires yielded significant improvements in the open-circuit voltage of the microwire-array-based photocathodes relative to Si MW arrays that did not have a buried n+p junction. Analysis of the spectral response and light-intensity dependence of these devices allowed for optimization of the catalyst loading and photocurrent density. The microwire arrays were also removed from the substrate to create flexible, hydrogen-evolving membranes that have potential for use in a solar water-splitting device.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Walter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Self-citationChen, Z., Cummins, D., Reinecke, B. N., Clark, E., Sunkara, M. K., & Jaramillo, T. F. (2011) · Nano Letters · doi:10.1021/nl2020476 · Cited by 1,153
Cited by
Engineering heterogeneous semiconductors for solar water splitting
Li, X., Yu, J., Low, J., Fang, Y., Xiao, J., & Chen, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04461d · Cited by 1,888
Faber, M. S., & Jin, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01760a · Cited by 1,317
Earth-abundant hydrogen evolution electrocatalysts
McKone, J. R., Marinescu, S. C., Brunschwig, B. S., Winkler, J. R., & Gray, H. B. (2014) · Chem. Sci. · doi:10.1039/c3sc51711j · Cited by 727
Self-citationWill Solar-Driven Water-Splitting Devices See the Light of Day?
McKone, J. R., Lewis, N. S., & Gray, H. B. (2014) · Chemistry of Materials · doi:10.1021/cm4021518 · Cited by 714
Self-citationProgress in Developing Metal Oxide Nanomaterials for Photoelectrochemical Water Splitting
Yang, Y., Niu, S., Han, D., Liu, T., Wang, G., & Li, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700555 · Cited by 655
Hu, S., Xiang, C., Haussener, S., Berger, A. D., & Lewis, N. S. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40453f · Cited by 586
Self-citationDing, Q., Song, B., Xu, P., & Jin, S. (2016) · Chem · doi:10.1016/j.chempr.2016.10.007 · Cited by 577
Strategies for stable water splitting via protected photoelectrodes
Bae, D., Seger, B., Vesborg, P. C. K., Hansen, O., & Chorkendorff, I. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00918b · Cited by 572
Morales-Guio, C. G., Tilley, S. D., Vrubel, H., Grätzel, M., & Hu, X. (2014) · Nature Communications · doi:10.1038/ncomms4059 · Cited by 484
Huang, Z., Chen, Z., Chen, Z., Lv, C., Meng, H., & Zhang, C. (2014) · ACS Nano · doi:10.1021/nn5022204 · Cited by 440
Gong, Q., Wang, Y., Hu, Q., Zhou, J., Feng, R., Duchesne, P. N., Zhang, P., Chen, F., Han, N., Li, Y., et al. (2016) · Nature Communications · doi:10.1038/ncomms13216 · Cited by 427
Enabling Silicon for Solar-Fuel Production
Sun, K., Shen, S., Liang, Y., Burrows, P. E., Mao, S. S., & Wang, D. (2014) · Chemical Reviews · doi:10.1021/cr300459q · Cited by 393
Liu, W., Liu, H., Dang, L., Zhang, H., Wu, X., Yang, B., Li, Z., Zhang, X., Lei, L., & Jin, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201603904 · Cited by 357
Corp, K. L., & Schlenker, C. W. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02869 · Cited by 302
Thin-Film Materials for the Protection of Semiconducting Photoelectrodes in Solar-Fuel Generators
Hu, S., Lewis, N. S., Ager, J. W., Yang, J., McKone, J. R., & Strandwitz, N. C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b05976 · Cited by 290
Self-citationLi, D., Shi, J., & Li, C. (2018) · Small · doi:10.1002/smll.201704179 · Cited by 287
Dasgupta, N. P., Liu, C., Andrews, S., Prinz, F. B., & Yang, P. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405680p · Cited by 278
Bao, X.-Q., Petrovykh, D. Y., Alpuim, P., Stroppa, D. G., Guldris, N., Fonseca, H., Costa, M., Gaspar, J., Jin, C., & Liu, L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.06.014 · Cited by 96
Metadata
- Authors
- Warren, E. L., McKone, J. R., Atwater, H. A., Gray, H. B., & Lewis, N. S.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 11
- Pages
- 9653
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2114218495
- Cited by
- 200
- References
- 2
- FWCI
- 9.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.