Fungi-based porous carbons for CO2 adsorption and separation
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
A series of porous carbons (PCs) with adjustable high surface areas and narrow micropore size distributions have been prepared by KOH activation of fungi-based carbon sources. The resulting PCs demonstrate both high CO2 uptake (5.5 mmol g−1) and high CO2/N2 selectivity (27.3) at 273 K and 1 bar, implying their great potential as CO2 capture sorbents.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Synthesis, Structure, and Carbon Dioxide Capture Properties of Zeolitic Imidazolate Frameworks
Phan, A., Doonan, C. J., Uribe-Romo, F. J., Knobler, C. B., O’Keeffe, M., & Yaghi, O. M. (2010) · Accounts of Chemical Research · doi:10.1021/ar900116g · Cited by 2,618
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Colossal cages in zeolitic imidazolate frameworks as selective carbon dioxide reservoirs
Wang, B., Côté, A. P., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2008) · Nature · doi:10.1038/nature06900 · Cited by 1,581
Banerjee, R., Furukawa, H., Britt, D., Knobler, C., O’Keeffe, M., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809459e · Cited by 1,443
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
CO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Waste materials for activated carbon preparation and its use in aqueous-phase treatment: A review
Dias, J. M., Alvim-Ferraz, M. C. M., Almeida, M. F., Rivera-Utrilla, J., & Sánchez-Polo, M. (2007) · Journal of Environmental Management · doi:10.1016/j.jenvman.2007.07.031 · Cited by 862
Raymundo-Piñero, E., Azaïs, P., Cacciaguerra, T., Cazorla-Amorós, D., Linares-Solano, A., & Béguin, F. (2005) · Carbon · doi:10.1016/j.carbon.2004.11.005 · Cited by 860
Cited by
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Self-citationRecent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Self-citationA search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Self-citationActivated Carbon Spheres for CO2 Adsorption
Wickramaratne, N. P., & Jaroniec, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400112m · Cited by 445
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.006 · Cited by 393
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Tailoring porosity in carbon materials for supercapacitor applications
Borchardt, L., Oschatz, M., & Kaskel, S. (2014) · Mater. Horiz. · doi:10.1039/c3mh00112a · Cited by 343
Self-citationHighly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity
Alabadi, A., Razzaque, S., Yang, Y., Chen, S., & Tan, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.032 · Cited by 322
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Deng, S., Wei, H., Chen, T., Wang, B., Huang, J., & Yu, G. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.115 · Cited by 273
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Microwave-Assisted Rapid Synthesis of Well-Shaped MOF-74 (Ni) for CO2 Efficient Capture
Chen, C., Feng, X., Zhu, Q., Dong, R., Yang, R., Cheng, Y., & He, C. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b03271 · Cited by 242
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Hassan, M. M., & Carr, C. M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2020.129087 · Cited by 208
Abd, A. A., Othman, M. R., & Kim, J. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15121-9 · Cited by 216
Highly porous nitrogen-doped polyimine-based carbons with adjustable microstructures for CO2 capture
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11995e · Cited by 201
Self-citationCoconut shell-based microporous carbons for CO2 capture
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.07.008 · Cited by 197
Li, M., & Xiao, R. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.12.015 · Cited by 198
Activated carbons—preparation, characterization and their application in CO2 capture: A review
Serafin, J., & Dziejarski, B. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28023-9 · Cited by 179
Porous carbon nanosheets with precisely tunable thickness and selective CO2 adsorption properties
Hao, G.-P., Jin, Z.-Y., Sun, Q., Zhang, X.-Q., Zhang, J.-T., & Lu, A.-H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41906a · Cited by 180
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Bai, R., Yang, M., Hu, G., Xu, L., Hu, X., Li, Z., Wang, S., Dai, W., & Fan, M. (2015) · Carbon · doi:10.1016/j.carbon.2014.09.079 · Cited by 177
“fine micropores (<1 nm) of porous carbons determined the CO2 capture capacity at ambient temperatures and pressures [12,20–24], whereas the adsorption of CO2 at 0 C and up to 1 bar is restricted to pores narrower than 1 nm.”
BackgroundMethodInfluentialCO2 Capture in the Sustainable Wheat-Derived Activated Microporous Carbon Compartments
Hong, S.-M., Jang, E., Dysart, A. D., Pol, V. G., & Lee, K. B. (2016) · Scientific Reports · doi:10.1038/srep34590 · Cited by 177
Samanta, S., & Srivastava, R. (2020) · Materials Advances · doi:10.1039/d0ma00293c · Cited by 170
Review on porous nanomaterials for adsorption and photocatalytic conversion of CO2
Ma, Y., Wang, Z., Xu, X., & Wang, J. (2017) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(17)62955-3 · Cited by 167
Self-citationDevelopment of microporous carbons for CO2 capture by KOH activation of African palm shells
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.07.003 · Cited by 165
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400059t · Cited by 163
Self-citationWang, Y., Yang, R., Li, M., & Zhao, Z. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.008 · Cited by 158
Water caltrop shell-derived nitrogen-doped porous carbons with high CO2 adsorption capacity
Zhao, Z., Ma, C., Chen, F., Xu, G., Pang, R., Qian, X., Shao, J., & Hu, X. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2021.105969 · Cited by 153
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X., Wang, L., Zhao, Y., Lin, Y., Sun, Y., DaCosta, H., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 150
Microporous amine-functionalized aromatic polymers and their carbonized products for CO2 adsorption
Puthiaraj, P., Lee, Y., & Ahn, W. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.001 · Cited by 149
A novel activating strategy to achieve highly porous carbon monoliths for CO2 capture
Ma, X., Li, Y., Cao, M., & Hu, C. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14684g · Cited by 146
Efficient nitrogen doped porous carbonaceous CO2 adsorbents based on lotus leaf
Li, Q., Liu, S., Wang, L., Chen, F., Shao, J., & Hu, X. (2021) · Journal of Environmental Sciences · doi:10.1016/j.jes.2020.11.008 · Cited by 145
Zhou, H., Wang, J., Zhuang, J., & Liu, Q. (2013) · Nanoscale · doi:10.1039/c3nr04379g · Cited by 143
Self-citationShao, L., Li, Y., Huang, J., & Liu, Y. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04533 · Cited by 144
State-of-the-art review on capture of CO2 using adsorbents prepared from waste materials
Ochedi, F. O., Liu, Y., & Adewuyi, Y. G. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.03.036 · Cited by 140
Geng, Z., Xiao, Q., Lv, H., Li, B., Wu, H., Lu, Y., & Zhang, C. (2016) · Scientific Reports · doi:10.1038/srep30049 · Cited by 135
Wei, H., Chen, H., Fu, N., Chen, J., Lan, G., Qian, W., Liu, Y., Lin, H., & Han, S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.01.194 · Cited by 135
Ismail, I. S., Singh, G., Smith, P., Kim, S., Yang, J.-H., Joseph, S., Yusup, S., Singh, M., Bansal, V., Talapaneni, S. N., et al. (2020) · Carbon · doi:10.1016/j.carbon.2020.01.008 · Cited by 131
Zhang, L., Wang, Y., Peng, B., Yu, W., Wang, H., Wang, T., Deng, B., Chai, L., Zhang, K., & Wang, J. (2014) · Green Chemistry · doi:10.1039/c4gc00761a · Cited by 131
Self-citationChemically activated fungi-based porous carbons for hydrogen storage
Wang, J., Senkovska, I., Kaskel, S., & Liu, Q. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.016 · Cited by 131
Self-citationEfficient CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from d-Glucose
Yue, L., Rao, L., Wang, L., An, L., Hou, C., Ma, C., DaCosta, H., & Hu, X. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01028 · Cited by 126
Management of surgical mask waste to activated carbons for CO2 capture
Serafin, J., Sreńscek-Nazzal, J., Kamińska, A., Paszkiewicz, O., & Michalkiewicz, B. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101970 · Cited by 124
Li, Z., Wu, D., Huang, X. W., Ma, J., Liu, H., Liang, Y., Fu, R., & Matyjaszewski, K. A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00941j · Cited by 125
Wang, J., Ma, R., Zhou, Z., Liu, G., & Liu, Q. (2015) · Scientific Reports · doi:10.1038/srep09304 · Cited by 123
Self-citationSmall mesopore engineering of pitch-based porous carbons toward enhanced supercapacitor performance
Zhang, G., Guan, T., Wang, N., Wu, J., Wang, J., Qiao, J., & Li, K. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125818 · Cited by 122
Self-citationDesigned porous carbon materials for efficient CO2 adsorption and separation
Zhang, X.-Q., Li, W., & Lu, A. (2015) · New Carbon Materials · doi:10.1016/s1872-5805(15)60203-7 · Cited by 139
Triazine-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Wang, S., Liu, M., Huang, J., & Liu, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.145 · Cited by 123
Designing Carbon‐Based Porous Materials for Carbon Dioxide Capture
Singh, R., Wang, L., Ostrikov, K., & Huang, J. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202202290 · Cited by 125
Nelson, K. M., Mahurin, S. M., Mayes, R. T., Williamson, B., Teague, C. M., Binder, A., Baggetto, L., Veith, G. M., & Dai, S. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.09.050 · Cited by 117
Nitrogen-Doped Porous Carbons from Lotus Leaf for CO2 Capture and Supercapacitor Electrodes
Liu, S., Yang, P., Wang, L., Li, Y., Wu, Z., Ma, R., Wu, J., & Hu, X. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00886 · Cited by 116
Kou, J., & Sun, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07305k · Cited by 118
Talapaneni, S. N., Lee, J. H., Je, S. H., Büyükçakır, O., Kwon, T., Polychronopoulou, K., Choi, J. W., & Coşkun, A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604658 · Cited by 121
Porous materials for carbon dioxide capture
Lu, A., & Hao, G. (2013) · Annual Reports Section A (Inorganic Chemistry) · doi:10.1039/c3ic90003g · Cited by 124
Yang, F., Wang, J., Liu, L., Zhang, P., Yu, W., Deng, Q., Zeng, Z., & Deng, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03995 · Cited by 122
Self-citationMukhtar, A., Saqib, S., Mellon, N. B., Babar, M., Rafiq, S., Ullah, S., Bustam, M. A., Al-Sehemi, A. G., Muhammad, N., & Chawla, M. (2020) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2020.103203 · Cited by 116
A cost-effective synthesis of heteroatom-doped porous carbons as efficient CO 2 sorbents
Ashourirad, B., Arab, P., İslamoğlu, T., Cychosz, K. A., Thommes, M., & El‐Kaderi, H. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06251b · Cited by 117
Xu, Y., Yang, Z., Zhang, G., & Zhao, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121645 · Cited by 109
Joseph, S., Saianand, G., Benzigar, M. R., Ramadass, K., Singh, G., Gopalan, A., Yang, J., Mori, T., Al-Muhtaseb, A. H., Yi, J., et al. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000169 · Cited by 112
Shao, L., Liu, M., Huang, J., & Liu, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.11.043 · Cited by 105
Rehman, A., & Park, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.046 · Cited by 107
Highly mesoporous carbons derived from biomass feedstocks templated with eutectic salt ZnCl 2 /KCl
Ma, Z., Zhang, H., Yang, Z., Zhang, Y., Yu, B., & Liu, Z. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03829k · Cited by 112
Porous carbon based on polyvinylidene fluoride: Enhancement of CO2 adsorption by physical activation
Hong, S. M., Choi, S. W., Kim, S. H., & Lee, K. B. (2015) · Carbon · doi:10.1016/j.carbon.2015.12.012 · Cited by 107
Liu, Y., Wang, X., & Cao, M. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.07.019 · Cited by 108
Sivadas, D. L., Vijayan, S., Rajeev, R., Ninan, K. N., & Prabhakaran, K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.057 · Cited by 111
Oxygen-containing functional group-facilitated CO2 capture by carbide-derived carbons
Xing, W., Liu, C., Zhou, Z., Zhou, J., Wang, G., Zhuo, S., Xue, Q., Song, L., & Yan, Z. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-189 · Cited by 101
Yuan, H., Chen, J., Li, D., Chen, H., & Chen, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.206 · Cited by 100
Yang, M., Guo, L., Hu, G., Hu, X., Chen, J., Shen, S., Dai, W., & Fan, M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04038 · Cited by 96
Polyurethane Foam-Based Ultramicroporous Carbons for CO2 Capture
Ge, C., Song, J., Qin, Z., Wang, J., & Fan, W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04771 · Cited by 94
Self-citationShao, L., Sang, Y., Huang, J., & Liu, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.108 · Cited by 95
Wang, J., Zhou, H., Zhuang, J., & Liu, Q. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp04228j · Cited by 92
Self-citationLi, D., Zhou, J., Zhang, Z., Li, L., Tian, Y., Lu, Y., Qiao, Y., Li, J., & Wen, L. (2016) · Carbon · doi:10.1016/j.carbon.2016.12.039 · Cited by 95
Koutsianos, A., Kazimierska, E., Barron, A. R., Taddei, M., & Andreoli, E. (2019) · Dalton Transactions · doi:10.1039/c9dt00154a · Cited by 96
Zhu, B., Shang, C., & Guo, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01113 · Cited by 91
Effect of Dopants on the Adsorption of Carbon Dioxide on Ceria Surfaces
Li, M., Tumuluri, U., Wu, Z., & Dai, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500899 · Cited by 90
An, Y., Li, Z., Yang, Y., Guo, B., Zhang, Z., Wu, H., & Hu, Z. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700033 · Cited by 88
Nitrogen-doped porous carbon monolith as a highly efficient catalyst for CO 2 conversion
Ma, X., Zou, B., Cao, M., Chen, S., & Hu, C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02734e · Cited by 86
Kou, J., & Sun, L. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02857 · Cited by 87
Highly porous N-doped carbons impregnated with sodium for efficient CO 2 capture
Kim, Y. K., Kim, G. M., & Lee, J. W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01776a · Cited by 91
Qi, S.-C., Liu, Y., Peng, A.-Z., Xue, D.-M., Liu, X., Liu, X.-Q., & Sun, L.-B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.167 · Cited by 84
Wang, J., & Liu, Q. (2014) · Nanoscale · doi:10.1039/c3nr05825e · Cited by 82
Self-citationZhu, M., Cai, W., Verpoort, F., & Zhou, J. (2019) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2019.03.044 · Cited by 83
Adeniran, B., Masika, E., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03565h · Cited by 80
Liu, J., Sun, N., Sun, C., Liu, H., Snape, C. E., Li, K., Wei, W., & Sun, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.036 · Cited by 85
Zhu, B., Qiu, K., Shang, C., & Guo, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06072e · Cited by 82
Li, D., Zhou, J., Wang, Y., Tian, Y., Wei, L., Zhang, Z., Qiao, Y., & Li, J. (2018) · Fuel · doi:10.1016/j.fuel.2018.10.122 · Cited by 77
Gomes, R., & Bhaumik, A. (2014) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2014.10.032 · Cited by 77
Melaleuca bark based porous carbons for hydrogen storage
Xiao, Y., Dong, H., Long, C., Zheng, M., Lei, B., Zhang, H., & Liu, Y. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.05.134 · Cited by 75
Serafin, J., Kiełbasa, K., & Michalkiewicz, B. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131751 · Cited by 73
Gu, D., Ma, R., Zhou, Y., Wang, F., Yan, K., Liu, Q., & Wang, J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03046 · Cited by 73
Self-citationNitrogen enriched biochar used as CO2 adsorbents: a brief review
Qiao, Y., & Wu, C. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2021.100018 · Cited by 70
Zhu, B., Li, K., Liu, J., Liu, H., Sun, C., Snape, C. E., & Guo, Z. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00438h · Cited by 71
Imidazole-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Sang, Y., & Huang, J. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.08.025 · Cited by 69
Gas adsorption studies of CO2 and N2 in spatially aligned double-walled carbon nanotube arrays
Babu, D. J., Lange, M., Cherkashinin, G., Issanin, A., Staudt, R., & Schneider, J. J. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.045 · Cited by 69
Li, D., Tian, Y., Li, L., Li, J., & Zhang, H. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0041-7 · Cited by 67
Geng, J., Xue, D., Liu, X., Shi, Y., & Sun, L. (2016) · AIChE Journal · doi:10.1002/aic.15531 · Cited by 68
O-containing hyper-cross-linked polymers and porous carbons for CO 2 capture
Liu, M., Shao, L., Huang, J., & Liu, Y. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.12.036 · Cited by 66
Metadata
- Authors
- Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S.
- Affiliations
- Technische Universität Dresden (DE)
- Corresponding author
- Kaskel, Stefan
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 28
- Pages
- 13911
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2043376492
- Cited by
- 220
- References
- 39
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 12 · 2023: 10 · 2022: 14 · 2021: 15 · 2020: 18 · 2019: 17 · 2018: 21 · 2017: 19 · 2016: 19 · 2015: 24 · 2014: 26 · 2013: 12 · 2012: 3
- FWCI
- 31.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry (publishedVersion)
- Max Planck Digital Library (submittedVersion)
- MPG.PuRe (Max Planck Society) (submittedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Materials Science › Materials Chemistry › Covalent Organic Framework Applications
- Physical Sciences › Chemistry › Inorganic Chemistry › Metal-Organic Frameworks: Synthesis and Applications
- Keywords
- porous carbon, CO2 adsorption, CO2 capture, CO2/N2 selectivity, KOH activation, fungal biomass, biomass-derived carbon, micropore size distribution, high surface area, carbon adsorbents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.