CoChat
Sign Up
Cited by 208

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Biomass-derived porous carbonaceous materials and their composites as adsorbents for cationic and anionic dyes: A review

Hassan, Mohammad M., Carr, Christopher M.·2021·Chemosphere
DOI 10.1016/j.chemosphere.2020.129087
Open this paper in CoChat — free account

Abstract

Currently used textile dyes are not highly toxic or carcinogenic, but the intense and persistent color of the effluent is problematic. Of the remediation processes investigated, the adsorption process is attractive, and carbonaceous adsorbents (CAs) are ideal for that purpose because of their very high dye-binding capacity (DBC). In this review, the potential of biomass-based feedstocks to produce CAs and the application of the produced adsorbents for the removal of various types of dyes from effluent have been compiled and critically reviewed. The effect of preparation conditions on the surface area, porosity, pore volume, and chemical characteristics of the produced CAs has been outlined and discussed. The DBC of various CAs at the optimum conditions has been compiled, and dye-binding mechanisms, dye sorption isotherm models, the stability of adsorbents, and regeneration methods of CAs are discussed. The analysis of the compiled dye-adsorption data shows that the dye-adsorption capacity of some CAs derived from biomasses and their composites is considerably higher than the commercially available activated carbon (AC) adsorbents. For example, a commercial AC (Filtrasorb-400) showed 400 mg/g DBC for the C.I. Reactive Red 120 dye. Conversely, the CS-DB adsorbent showed excellent anionic and cationic DBC for C.I. Direct Red 28 and C.I. Basic Green 4 dyes, 20317 and 12502 mg/g respectively. The porous carbon/polyvinyl alcohol hydrogel and GO/zeolitic imidazolate framework compos…

Overview

Integrity signals

Registry

Crossref · 10.1016/j.chemosphere.2020.129087

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • A large pore volume allows binding of the highest number of dye molecules to the adsorbent.

    “The presence of a large pore volume allows the binding of the highest number of dye molecules to the adsorbent (Hassan and Carr, 2021;Moosavi et al., 2020).”

    From Biomass-Based Adsorbents for Removal of Dyes From Wastewater: A Review (2021) · cites this paper as Hassan and Carr, 2021

  • Dye-adsorption capacity of some carbonaceous adsorbents derived from biomasses and their composites is noticeably higher than commercial activated carbon adsorbents.

    “In contrast to these investigations, Hassan and Carr (2021) reviewed studies that revealed the dye-adsorption capacity of some carbonaceous adsorbents derived from biomasses and their composites is noticeably higher than the commercial activated carbon adsorbents (Hassan and Carr, 2021).”

    From Biomass-Based Adsorbents for Removal of Dyes From Wastewater: A Review (2021) · cites this paper as Hassan and Carr, 2021

  • Common desorption methods include thermal treatment, acid treatment with H2SO4, HNO3, HCl, H3PO4, or NaOH, organic solvents such as methanol and ethanol, biological methods, and vacuum methods.

    “The common desorption methods include thermal treatment, acid (H 2 SO 4 , HNO 3 , HCl, H 3 PO 4 , NaOH) treatment, organic solvents (methanol and ethanol), biological methods, and vacuum methods (Hassan and Carr, 2021).”

    From Biomass-Based Adsorbents for Removal of Dyes From Wastewater: A Review (2021) · cites this paper as Hassan and Carr, 2021

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 181

  1. Abdel-Ghani, 2019, Magnetic activated carbon nanocomposite from Nigella sativa L. waste (MNSA) for the removal of Coomassie brilliant blue dye from aqueous solution: statistical design of experiments for optimization of the adsorption conditions, J. Adv. Res., 17, 55, 10.1016/j.jare.2018.12.004 · DOI
  2. Abdi, 2017, Synthesis of metal-organic framework hybrid nanocomposites based on GO and CNT with high adsorption capacity for dye removal, Chem. Eng. J., 326, 1145, 10.1016/j.cej.2017.06.054 · DOI
  3. Abe, 2000, Amination of activated carbon and adsorption characteristics of its aminated surface, Langmuir, 16, 5059, 10.1021/la990976t · DOI
  4. Achieng, 2019, Preparation, characterization of fish scales biochar and their applications in the removal of anionic indigo carmine dye from aqueous solutions, Water Sci. Technol., 80, 2218, 10.2166/wst.2020.040 · DOI
  5. Ahel, 1994, Behavior of alkylphenol polyethoxylate surfactants in the aquatic environment – I Occurrence and transformation in sewage treatment, Water Res., 28, 1131, 10.1016/0043-1354(94)90200-3 · DOI
  6. Ahel, 1994, Behavior of alkylphenol polyethoxylate surfactants in the aquatic environment – II Occurrence and transformation in rivers, Water Res., 28, 1143, 10.1016/0043-1354(94)90201-1 · DOI
  7. Ahmad, 2014, Kinetic, equilibrium and thermodynamic studies of synthetic dye removal using pomegranate peel activated carbon prepared by microwave-induced KOH activation, Water Resour. Ind., 6, 18, 10.1016/j.wri.2014.06.002 · DOI
  8. Akbarnezhad, 2018, Biochar-based magnetic nanocomposite for dye removal from aqueous solutions: response surface modeling and kinetic study, Russ. J. Appl. Chem., 91, 1856, 10.1134/S1070427218110174 · DOI
  9. Al-Degs, 2004, Effect of surface area, micropores, secondary micropores, and mesopores volumes of activated carbons on reactive dyes adsorption from solution, Separ. Sci. Technol., 39, 97, 10.1081/SS-120027403 · DOI
  10. Al-Degs, 2008, Effect of solution pH, ionic strength, and temperature on adsorption behavior of reactive dyes on activated carbon, Dyes Pigments, 77, 16, 10.1016/j.dyepig.2007.03.001 · DOI
  11. Aljeboree, 2017, Kinetics and equilibrium study for the adsorption of textile dyes on coconut shell activated carbon, Arabian J. Chem., 10, S3381, 10.1016/j.arabjc.2014.01.020 · DOI · Paper page
  12. Amin, 2008, Removal of reactive dye from aqueous solutions by adsorption onto activated carbons prepared from sugarcane bagasse pith, Desalination, 223, 152, 10.1016/j.desal.2007.01.203 · DOI
  13. Aravindhan, 2009, Preparation and characterization of activated carbon from marine macro-algal biomass, J. Hazard Mater., 162, 688, 10.1016/j.jhazmat.2008.05.083 · DOI
  14. Bai, 2015, Synthesis of water-dispersible graphene-modified magnetic polypyrrole nanocomposite and its ability to efficiently adsorb methylene blue from aqueous solution, Chem. Eng. J., 279, 757, 10.1016/j.cej.2015.05.068 · DOI
  15. Barin, 2014, Influence of hydrothermal carbonization on formation of curved graphite structures obtained from a lignocellulosic precursor, Carbon, 78, 609, 10.1016/j.carbon.2014.07.017 · DOI
  16. Bayrak, 2013, Removal of reactive dye from aqueous solution by activated carbon, Asian J. Chem., 25, 71, 10.14233/ajchem.2013.12732 · DOI
  17. Beakou, 2017, A novel biochar from Manihot esculenta Crantz waste: application for the removal of Malachite Green from wastewater and optimization of the adsorption process, Water Sci. Technol., 76, 1447, 10.2166/wst.2017.332 · DOI
  18. Beakou, 2017, Novel activated carbon from Manihot esculenta crantz for removal of methylene blue, Sust. Environ. Res., 27, 215, 10.1016/j.serj.2017.06.003 · DOI
  19. Bello, 2011, Utilization of cocoa pod husk for the removal of Remazol Black B reactive dye from aqueous solutions: kinetic, equilibrium and thermodynamic studies, Trends Appl. Sci. Res., 6, 794, 10.3923/tasr.2011.794.812 · DOI
  20. Boutillara, 2019, In-situ copper impregnation by chemical activation with CuCl2 and its application to SO2 and H2S capture by activated carbons, Chem. Eng. J., 372, 631, 10.1016/j.cej.2019.04.183 · DOI
  21. Branton, 2010, Effects of active carbon pore size distributions on adsorption of toxic organic compounds, Adsorption, 17, 293, 10.1007/s10450-010-9284-4 · DOI
  22. Brune, 2009, Microalgal biomass for greenhouse gas reductions: potential for replacement of fossil fuels and animal feeds, J. Environ. Eng., 135, 1136, 10.1061/(ASCE)EE.1943-7870.0000100 · DOI
  23. Calvete, 2010, Application of carbon adsorbents prepared from Brazilian-pine fruit shell for the removal of reactive orange 16 from aqueous solution: kinetic, equilibrium, and thermodynamic studies, J. Environ. Manag., 91, 1695
  24. Cao, 2014, In situ preparation of magnetic Fe3O4/chitosan nanoparticles via a novel reduction–precipitation method and their application in adsorption of reactive azo dye, Powder Technol., 260, 90, 10.1016/j.powtec.2014.03.025 · DOI
  25. Cardoso, 2011, Removal of Remazol Black B textile dye from aqueous solution by adsorption, Desalination, 269, 92, 10.1016/j.desal.2010.10.047 · DOI
  26. Cardoso, 2012, Comparison of Spirulina platensis microalgae and commercial activated carbon as adsorbents for the removal of Reactive Red 120 dye from aqueous effluents, J. Hazard Mater., 241–242, 146, 10.1016/j.jhazmat.2012.09.026 · DOI
  27. Chang, 2015, Characterization of activated carbon prepared from chlorella-based algal residue, Bioresour. Technol., 184, 344, 10.1016/j.biortech.2014.09.131 · DOI
  28. Cheng, 2017, Characterization and adsorption properties of la and Fe modified activated carbon for dye wastewater treatment, Green Process. Synth., 6, 487, 10.1515/gps-2016-0120 · DOI
  29. Choi, 2019, The economical production of functionalized Ashe juniper derived-biochar with high hazardous dye removal efficiency, Ind. Crop. Prod., 137, 672, 10.1016/j.indcrop.2019.05.006 · DOI
  30. da Silva Leite, 2016, Monitoring ecotoxicity of disperse red 1 dye during photo-Fenton degradation.s, Chemosphere, 148, 511, 10.1016/j.chemosphere.2016.01.053 · DOI
  31. Dai, 2018, Calcium-rich biochar from crab shell: an unexpected super adsorbent for dye removal, Bioresour. Technol., 267, 510, 10.1016/j.biortech.2018.07.090 · DOI
  32. Daoud, 2017, Removal of reactive dye BEZAKTIV Red S-MAX) from aqueous solution by adsorption onto activated carbons prepared from date palm rachis and jujube stones, J. Mol. Liq., 243, 799, 10.1016/j.molliq.2017.08.093 · DOI
  33. Das, 2017, Graphene and graphene-like materials in biomass conversion: paving the way to the future, J. Mater. Chem., 5, 25131, 10.1039/C7TA09418C · DOI
  34. Dawood, 2017, Synthesis and characterization of slow pyrolysis pinecone biochar in the removal of organic and inorganic pollutants from aqueous solution by adsorption: kinetic, equilibrium, mechanism and thermodynamic, Bioresour. Technol., 246, 76, 10.1016/j.biortech.2017.07.019 · DOI
  35. Dehghani, 2013, Adsorption of Reactive Blue 29 dye from aqueous solution by multiwall carbon nanotubes, Desal. Water Treat., 51, 7655, 10.1080/19443994.2013.791772 · DOI
  36. Dil, 2016, Modeling of quaternary dyes adsorption onto ZnO-NR-AC artificial neural network: analysis by derivative spectrophotometry, J. Ind. Eng. Chem., 34, 186, 10.1016/j.jiec.2015.11.010 · DOI
  37. Dos Santos, 2015, Application of carbon composite adsorbents prepared from coffee waste and clay for the removal of reactive dyes from aqueous solutions, J. Braz. Chem. Soc., 26, 924
  38. Dos Santos, 2016, Removal of Reactive Orange 107 dye from aqueous solution by activated carbon from Pinus elliottii sawdust: a response surface methodology study, Water Air Soil Pollut., 227, 300, 10.1007/s11270-016-3003-z · DOI
  39. Du, 2017, Microwave-assisted one-step preparation of macadamia nut shell-based activated carbon for efficient adsorption of Reactive Blue, New J. Chem., 41, 15373, 10.1039/C7NJ03208K · DOI
  40. Duman, 2016, Removal of triphenylmethane and reactive azo dyes from aqueous solution by magnetic carbon nanotube-κ-carrageenan-Fe3O4 nanocomposite, J. Alloys Compd., 687, 370, 10.1016/j.jallcom.2016.06.160 · DOI
  41. El-Mahdy, 2020, Direct synthesis of nitrogen-doped mesoporous carbons from triazine-functionalized resol for CO2 uptake and highly efficient removal of dyes, J. Hazard Mater., 391, 122163, 10.1016/j.jhazmat.2020.122163 · DOI
  42. Elsagh, 2017, Evaluation of the potential cationic dye removal using adsorption by graphene and carbon nanotubes as adsorbents surfaces, Arab. J. Chem., 10, S2862, 10.1016/j.arabjc.2013.11.013 · DOI
  43. Fadhil, 2017, Production of liquid fuels and activated carbons from fish waste, Fuel, 187, 435, 10.1016/j.fuel.2016.09.064 · DOI
  44. Fang, 2012, Preparation of corncob-based biochar and its application in removing basic dyes from aqueous solution, Adv. Mater. Res., 550, 2420, 10.4028/www.scientific.net/AMR.550-553.2420 · DOI
  45. Fathy, 2017, Carbon nanotubes synthesis using carbonization of pretreated rice straw through chemical vapor deposition of camphor, RSC Adv., 7, 28535, 10.1039/C7RA04882C · DOI
  46. Ferreira, 2017, Adsorption of red azo dyes on multi-walled carbon nanotubes and activated carbon: a thermodynamic study, Colloid. Surface. Physicochem. Eng. Aspect., 529, 531, 10.1016/j.colsurfa.2017.06.021 · DOI
  47. Ferrera-Lorenzo, 2014, KOH activated carbon from conventional and microwave heating system of a macroalgae waste from the Agar-Agar industry, Fuel Process. Technol., 121, 25, 10.1016/j.fuproc.2013.12.017 · DOI
  48. Filipkowska, 2017, The use of active carbon immobilized on chitosan beads for RB5 and BV10 dye removal from aqueous solutions, Prog. Chem. Appl. Chitin Deriv., 22, 14
  49. Freundlich, 1906, Over the adsorption in solution, J. Phys. Chem., 57, 385
  50. Furlan, 2010, Removal of reactive dyes from aqueous solutions using combined coagulation/flocculation and adsorption on activated carbon, Resour. Conserv. Recycl., 54, 283, 10.1016/j.resconrec.2009.09.001 · DOI
  51. Galán, 2013, Reactive dye adsorption onto a novel mesoporous carbon, Chem. Eng. J., 219, 62, 10.1016/j.cej.2012.12.073 · DOI
  52. Gamby, 2001, Studies and characterizations of various activated carbons used for carbon/carbon supercapacitors, J. Power Sour., 101, 109, 10.1016/S0378-7753(01)00707-8 · DOI
  53. Gan, 2004, Activation of waste MDF sawdust charcoal and its reactive dye adsorption characteristics, Waste Manag., 24, 841, 10.1016/j.wasman.2004.02.010 · DOI · Paper page
  54. Ghosh, 2007, A simple method of producing single-walled carbon nanotubes from a natural precursor: Eucalyptus oil, Mater. Lett., 61, 3768, 10.1016/j.matlet.2006.12.030 · DOI
  55. Gonçalves, 2020, Chitosan hydrogel scaffold modified with carbon nanotubes and its application for food dyes removal in single and binary aqueous systems, Int. J. Biol. Macromol., 142, 85, 10.1016/j.ijbiomac.2019.09.074 · DOI
  56. Grajek, 2000, Regeneration of adsorbents by the use of liquid, subcritical and supercritical carbon dioxide, Adsorpt. Sci. Technol., 18, 347, 10.1260/0263617001493486 · DOI
  57. Guo, 2015, Preparation of graphene oxide-based hydrogels as efficient dye adsorbents for wastewater treatment, Nanoscale Res. Lett., 10, 272, 10.1186/s11671-015-0931-2 · DOI
  58. Guo, 2016, Chitosan/graphene oxide composite as an effective adsorbent for reactive red dye removal, Water Environ. Res., 88, 579, 10.2175/106143016X14609975746325 · DOI
  59. Guo, 2017, Characteristics and adsorption study of the activated carbon derived from municipal sewage sludge, Water Sci. Technol., 76, 1697, 10.2166/wst.2017.352 · DOI
  60. Guo, 2018, Sandwiched Fe3O4/carboxylate graphene oxide nanostructures constructed by layer-by-layer assembly for highly efficient and magnetically recyclable dye removal, ACS Sustain. Chem. Eng., 6, 1279, 10.1021/acssuschemeng.7b03635 · DOI
  61. Gupta, 2019, Fast and efficient adsorptive removal of organic dyes and active pharmaceutical ingredient by microporous carbon: effect of molecular size and charge, Chem. Eng. J., 378, 122218, 10.1016/j.cej.2019.122218 · DOI
  62. Güzel, 2017, Optimal oxidation with nitric acid of biochar derived from pyrolysis of weeds and its application in removal of hazardous dye methylene blue from aqueous solution, J. Clean. Prod., 144, 260, 10.1016/j.jclepro.2017.01.029 · DOI
  63. Han, 2015, Biochar supported nanoscale iron particles for the efficient removal of methyl orange dye in aqueous solutions, PloS One, 10
  64. Han, 2018, Efficient removal of methyl blue using nanoporous carbon from the waste biomass, Water Air Soil Pollut., 229, 26, 10.1007/s11270-017-3682-0 · DOI
  65. Hassan, 2018, A critical review on recent advancements of the removal of reactive dyes from dyehouse effluent by ion-exchange type adsorbents, Chemosphere, 209, 201, 10.1016/j.chemosphere.2018.06.043 · DOI · Paper page
  66. Hassan, 2002, Reuse of spent dyebath following decolorization with ozone, Color. Technol., 118, 104, 10.1111/j.1478-4408.2002.tb00365.x · DOI
  67. Hayashi, 2000, Preparation of activated carbon from lignin by chemical activation, Carbon, 38, 1873, 10.1016/S0008-6223(00)00027-0 · DOI
  68. Hilton, 2012, Mass balance and performance analysis of potassium hydroxide activated carbon, Ind. Eng. Chem. Res., 51, 9129, 10.1021/ie301293t · DOI
  69. Hong, 2017, Longan seed and mangosteen skin based activated carbons for the removal of Pb(II) ions and rhodamine-B dye from aqueous solutions, Desalin. Water Treat., 88, 154, 10.5004/dwt.2017.21368 · DOI
  70. Hopkins, 2020, Biochar for the removal of metals from solution: a review of lignocellulosic and novel marine feedstocks, J. Environ. Chem. Eng., 8, 103975
  71. Hou, 2020, Fabrication of N-doped carbons from waste bamboo shoot shell with high removal efficiency of organic dyes from water, Bioresour. Technol., 303, 122939, 10.1016/j.biortech.2020.122939 · DOI
  72. Hu, 2009, Effect of chemical activation of an activated carbon using zinc chloride on elemental mercury adsorption, Fuel Process. Technol., 90, 812, 10.1016/j.fuproc.2009.03.020 · DOI
  73. Huang, 2018, Superb adsorption capacity of biochar derived from leather shavings for Congo red, RSC Adv., 8, 29781, 10.1039/C8RA06370B · DOI
  74. Hutchinson, 1990, A microbial regeneration process for granular activated carbon-I. process modeling, Water Res., 24, 1209, 10.1016/0043-1354(90)90043-6 · DOI
  75. Inyang, 2014, Synthesis, characterization, and dye sorption ability of carbon nanotube–biochar nanocomposites, Chem. Eng. J., 236, 39, 10.1016/j.cej.2013.09.074 · DOI
  76. Islam, 2017, Mesoporous activated coconut shell-derived hydrochar prepared via hydrothermal carbonization-NaOH activation for methylene blue adsorption, J. Environ. Manag., 203, 237
  77. Jafari, 2016, Application of mesoporous magnetic carbon composite for reactive dyes removal: process optimization using response surface methodology, Kor. J. Chem. Eng., 33, 2878, 10.1007/s11814-016-0155-x · DOI
  78. Jung, 2017, Adsorptive removal of anionic azo dye from aqueous solution using activated carbon derived from extracted coffee residues, J. Clean. Prod., 166, 360, 10.1016/j.jclepro.2017.08.045 · DOI
  79. Karcher, 2002, Anion exchange resins for removal of reactive dyes from textile wastewaters, Water Res., 36, 4717, 10.1016/S0043-1354(02)00195-1 · DOI
  80. Karimifard, 2016, Removal of an anionic reactive dye from aqueous solution using functionalized multi-walled carbon nanotubes: isotherm and kinetic studies, Desalin. Water Treat., 57, 16643, 10.1080/19443994.2015.1079806 · DOI
  81. Kelm, 2019, Removal of azo dye from water via adsorption on biochar produced by the gasification of wood wastes, Environ. Sci. Pollut. Res., 26, 28558, 10.1007/s11356-018-3833-x · DOI
  82. Khalil, 2017, High surface area nanostructured activated carbons derived from sustainable sorghum stalk, J. Mol. Liq., 247, 386, 10.1016/j.molliq.2017.09.090 · DOI
  83. Khraisheh, 2002, Elucidation of controlling steps of reactive dye adsorption on activated carbon, Ind. Eng. Chem. Res., 41, 1651, 10.1021/ie000942c · DOI
  84. Kolur, 2019, Investigation of sulfuric acid-treated activated carbon properties, Turk. J. Chem., 43, 663, 10.3906/kim-1810-63 · DOI
  85. Kyzas, 2014, Magnetic modification of microporous carbon for dye adsorption, J. Colloid Interface Sci., 430, 166, 10.1016/j.jcis.2014.05.049 · DOI
  86. Lambert, 2011, Water quality as a threat to aquatic plants: discriminating between the effects of nitrate, phosphate, boron and heavy metals on charophytes, New Phytol., 189, 1051, 10.1111/j.1469-8137.2010.03543.x · DOI
  87. Langmuir, 1916, The constitution and fundamental properties of solids and liquids, J. Am. Chem. Soc., 38, 2221, 10.1021/ja02268a002 · DOI
  88. Larasati, 2020, Chemical regeneration of granular activated carbon: preliminary evaluation of alternative regenerant solutions, Environ. Sci.: Water Res. Technol., 6, 2043
  89. Lee, 1986, Adsorption of oxalic, malonic, and succinic acids on activated carbon, J. Chem. Eng. Data, 31, 133, 10.1021/je00044a001 · DOI
  90. Lee, 2006, Evaluation of the performance of adsorption and coagulation processes for the maximum removal of reactive dyes, Dyes Pigments, 69, 196, 10.1016/j.dyepig.2005.03.008 · DOI
  91. Li, 2008, Effects of carbonization temperatures on characteristics of porosity in coconut shell chars and activated carbons derived from carbonized coconut shell chars, Ind. Crop. Prod., 28, 190, 10.1016/j.indcrop.2008.02.012 · DOI
  92. Li, 2011, Maximizing the number of oxygen-containing functional groups on activated carbon by using ammonium persulfate and improving the temperature-programmed desorption characterization of carbon surface chemistry, Carbon, 49, 5002, 10.1016/j.carbon.2011.07.015 · DOI
  93. Li, 2013, Methylene blue adsorption on graphene oxide/calcium alginate composites, Carbohydr. Polym., 95, 501, 10.1016/j.carbpol.2013.01.094 · DOI
  94. Li, 2016, Effect of a magnetic field on the adsorptive removal of methylene blue onto wheat straw biochar, Bioresour. Technol., 206, 16, 10.1016/j.biortech.2015.12.087 · DOI
  95. Li, 2017, Nitrogen–doped hollow mesoporous carbon spheres for efficient water desalination by capacitive deionization, ACS Sustain. Chem. Eng., 5, 6635, 10.1021/acssuschemeng.7b00884 · DOI
  96. Li, 2018, Production of activated carbon from cow manure for wastewater treatment, Bioresour, 13, 3135
  97. Li, 2019, Effects of activation temperature on densities and volumetric CO2 adsorption performance of alkali-activated carbons, Fuel, 238, 232, 10.1016/j.fuel.2018.10.122 · DOI
  98. Li, 2020, ZnCl2–activated carbon from soybean dregs as a high–efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies, Environ. Technol., 41, 2013, 10.1080/09593330.2018.1554006 · DOI
  99. Liang, 2017, Bentonite/carbon composite as highly recyclable adsorbents for alkaline wastewater treatment and organic dye removal, Microporous Mesoporous Mater., 241, 107, 10.1016/j.micromeso.2016.12.016 · DOI
  100. Liou, 2010, Development of mesoporous structure and high adsorption capacity of biomass-based activated carbon by phosphoric acid and zinc chloride activation, Chem. Eng. J., 158, 129, 10.1016/j.cej.2009.12.016 · DOI
  101. Liu, 2003, A general model of biosorption of Cd2+, Cu2+ and Zn2+ by aerobic granules, J. Biotechnol., 102, 233, 10.1016/S0168-1656(03)00030-0 · DOI
  102. Liu, 2012, Adsorption of methylene blue from aqueous solution by graphene, Colloids Surf., B, 90, 197, 10.1016/j.colsurfb.2011.10.019 · DOI
  103. Liu, 2015, Spherical potassium intercalated activated carbon beads for pulverized fuel CO2 post-combustion capture, Carbon, 94, 243, 10.1016/j.carbon.2015.06.036 · DOI
  104. Liu, 2016, High surface area rice husk-based activated carbon prepared by chemical activation with ZnCl2-CuCl2 composite activator, Environ. Prog. Sustain. Energy, 35, 133, 10.1002/ep.12215 · DOI
  105. Liu, 2017, A valuable biochar from poplar catkins with high adsorption capacity for both organic pollutants and inorganic heavy metal ions, Sci. Rep., 7, 10033, 10.1038/s41598-017-09446-0 · DOI
  106. Liu, 2017, Heteroatoms doped porous carbon derived from hydrothermally treated sewage sludge: structural characterization and environmental application, J. Environ. Manag., 197, 151
  107. Liu, 2019, Enhanced dye adsorption from wastewater via Fe3O4 nanoparticles functionalized activated carbon, J. Hazard Mater., 373, 397, 10.1016/j.jhazmat.2019.03.103 · DOI
  108. Long, 2017, Hydrothermal synthesis of graphene oxide/multiwalled carbon nanotube/Fe3O4 ternary nanocomposite for removal of Cu (II) and methylene blue, J. Nanoparticle Res., 19, 318, 10.1007/s11051-017-4014-4 · DOI
  109. Low, 1997, Quaternized rice husk as sorbent for reactive dyes, Bioresour. Technol., 61, 121, 10.1016/S0960-8524(97)00054-0 · DOI
  110. Lua, 2004, Effect of activation temperature on the textural and chemical properties of potassium hydroxide activated carbon prepared from pistachio-nut shell, J. Colloid Interface Sci., 274, 594, 10.1016/j.jcis.2003.10.001 · DOI
  111. Machado, 2011, Adsorption of Reactive Red M-2BE dye from water solutions by multi-walled carbon nanotubes and activated carbon, J. Hazard Mater., 192, 1122, 10.1016/j.jhazmat.2011.06.020 · DOI
  112. Machado, 2012, Adsorption of Reactive Blue 4 dye from water solutions by carbon nanotubes: experiment and theory, Phys. Chem. Chem. Phys., 14, 11139, 10.1039/c2cp41475a · DOI
  113. Machado, 2014, Adsorption of a textile dye from aqueous solutions by carbon nanotubes, Mater. Res., 17, 153, 10.1590/S1516-14392013005000204 · DOI
  114. Mahaninia, 2015, Modified Activated carbons with amino groups and their copper adsorption properties in aqueous solution, Chin. J. Chem. Eng., 23, 50, 10.1016/j.cjche.2014.11.004 · DOI
  115. Mahmoud, 2016, Kinetics, isotherm, and thermodynamic studies of the adsorption of reactive red 195 A dye from water by modified Switchgrass Biochar adsorbent, J. Ind. Eng. Chem., 37, 156, 10.1016/j.jiec.2016.03.020 · DOI
  116. Makhado, 2018, Preparation and characterization of xanthan gum-cl-poly(acrylic acid)/o-MWCNTs hydrogel nanocomposite as highly effective reusable adsorbent for removal of methylene blue from aqueous solutions, J. Colloid Interface Sci., 513, 700, 10.1016/j.jcis.2017.11.060 · DOI
  117. Mao, 2020, Efficient dye removal and separation based on graphene oxide nanomaterials, New J. Chem., 44, 4519, 10.1039/C9NJ05895H · DOI
  118. Marrakchi, 2017, High-surface-area and nitrogen-rich mesoporous carbon material from fishery waste for effective adsorption of methylene blue, Powder Technol., 321, 428, 10.1016/j.powtec.2017.08.023 · DOI
  119. Marrakchi, 2017, Activated carbon–clay composite as an effective adsorbent from the spent bleaching sorbent of olive pomace oil: process optimization and adsorption of Acid Blue 29 and methylene blue, Chem. Eng. Res. Des., 128, 221, 10.1016/j.cherd.2017.10.015 · DOI
  120. Mohan, 2015, Lead sorptive removal using magnetic and nonmagnetic fast pyrolysis energy cane biochars, J. Colloid Interface Sci., 448, 238, 10.1016/j.jcis.2014.12.030 · DOI
  121. Moreno-Castilla, 1995, Activated carbon surface modifications by nitric acid, hydrogen peroxide, and ammonium peroxydisulfate treatments, Langmuir, 11, 4386, 10.1021/la00011a035 · DOI
  122. Mourand, 1995, Regeneration of spent adsorbents using homogeneous advanced oxidation, Water Environ. Res., 67, 355, 10.2175/106143095X131583 · DOI
  123. Nagano, 2000, Activated carbon from municipal waste, Carbon, 38, 915, 10.1016/S0008-6223(99)00208-0 · DOI
  124. Nasrullah, 2018, High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue, Int. J. Biol. Macromol., 107, 1792, 10.1016/j.ijbiomac.2017.10.045 · DOI
  125. Nautiyal, 2016, Adsorptive removal of dye using biochar derived from residual algae after in-situ transesterification: alternate use of waste of biodiesel industry, J. Environ. Manag., 182, 187
  126. Novak, 2009, Impact of biochar amendment on fertility of a southeastern coastal plain soil, Soil Sci., 174, 105, 10.1097/SS.0b013e3181981d9a · DOI · Paper page
  127. Oladipo, 2017, High-performance magnetic chicken bone-based biochar for efficient removal of Rhodamine-B dye and tetracycline: competitive sorption analysis, Water Sci. Technol., 76, 373, 10.2166/wst.2017.209 · DOI
  128. Osman, 2019, Production and characterization of activated carbon and carbon nanotubes from potato peel waste and their application in heavy metal removal, Environ. Sci. Pollut. Res., 26, 37228, 10.1007/s11356-019-06594-w · DOI · Paper page
  129. Özhan, 2014, Preparation and characterization of activated carbon from pine cone by microwave-induced ZnCl2 activation and its effects on the adsorption of methylene blue, Cellulose, 21, 2457, 10.1007/s10570-014-0299-y · DOI
  130. Purkait, 2017, Large area few-layer graphene with scalable preparation from waste biomass for high-performance supercapacitor, Sci. Rep., 7, 15239, 10.1038/s41598-017-15463-w · DOI
  131. Qi, 2017, Thermal stability of biochar and its effect on cadmium adsorption, Bioresour. Technol., 246, 48, 10.1016/j.biortech.2017.07.033 · DOI
  132. Qian, 2016, Effective removal of heavy metal by biochar colloids under different pyrolysis temperatures, Bioresour. Technol., 206, 217, 10.1016/j.biortech.2016.01.065 · DOI
  133. Rajabi, 2017, Removal of dye molecules from aqueous solution by carbon nanotubes and carbon nanotube functional groups: critical review, RSC Adv., 7, 47083, 10.1039/C7RA09377B · DOI
  134. Raziah, 2012, Synthesis of carbon nanotubes using natural carbon precursor: Castor oil, AIP Conf. Proc., 1482, 564, 10.1063/1.4757535 · DOI
  135. Regti, 2017, Potential use of activated carbon derived from Persea species under alkaline conditions for removing cationic dye from wastewaters, J. Assoc. Arab Univ. Basic Appl. Sci., 24, 10
  136. Reimerink, 1999, Adsorptions and its applications in industry and environmental protection, Stud. Surf. Sci. Catal. B, 120, 807, 10.1016/S0167-2991(99)80380-2 · DOI
  137. Rodríguez, 2009, Adsorption of anionic and cationic dyes on activated carbon from aqueous solutions: equilibrium and kinetics, J. Hazard Mater., 172, 1311, 10.1016/j.jhazmat.2009.07.138 · DOI
  138. Salvador, 2015, Regeneration of carbonaceous adsorbents. Part I: thermal regeneration, Microporous Mesoporous Mater., 202, 259, 10.1016/j.micromeso.2014.02.045 · DOI
  139. Samarghandi, 2009, Two-parameter isotherms of methyl orange sorption by pinecone derived activated carbon, Iran. J. Environ. Health Sci. Eng., 6, 285
  140. Sangon, 2018, Valorization of waste rice straw for the production of highly effective carbon-based adsorbents for dyes removal, J. Clean. Prod., 172, 1128, 10.1016/j.jclepro.2017.10.210 · DOI
  141. Saroyan, 2017, Effective impregnation for the preparation of magnetic mesoporous carbon: application to dye adsorption, J. Chem. Technol. Biotechnol., 92, 1899, 10.1002/jctb.5210 · DOI
  142. Sayğili, 2018, Uptake of anionic and cationic dyes by highly effective porous carbon adsorber based on industrial processing residues, Separ. Sci. Technol., 53, 1465, 10.1080/01496395.2017.1414846 · DOI
  143. Senthilkumar, 2006, Adsorption of dissolved reactive dye from aqueous phase onto activated carbon prepared from agricultural waste, Bioresour. Technol., 97, 1618, 10.1016/j.biortech.2005.08.001 · DOI
  144. Sevilla, 2010, Graphitic carbon nanostructures from cellulose, Chem. Phys. Lett., 490, 63, 10.1016/j.cplett.2010.03.011 · DOI
  145. Shams, 2015, Synthesis of graphene from biomass: a green chemistry approach, Mater. Lett., 161, 476, 10.1016/j.matlet.2015.09.022 · DOI
  146. Sharif, 2017, Electrochemical regeneration of a reduced graphene oxide/magnetite composite adsorbent loaded with methylene blue, Water Res., 114, 237, 10.1016/j.watres.2017.02.042 · DOI
  147. Sharma, 2010, Engineering data for optimization of preparation of activated carbon from an economically viable material, Chem. Eng. Data, 55, 3991, 10.1021/je100041x · DOI
  148. Shin, 2017, Distribution of oxygen functional groups of graphene oxide obtained from low-temperature atomic layer deposition of titanium oxide, RSC Adv., 7, 13979, 10.1039/C7RA00114B · DOI
  149. Shirzad-Siboni, 2014, Kinetics and equilibrium studies of removal of an azo dye from aqueous solution by adsorption onto scallop, J. Ind. Eng. Chem., 20, 610, 10.1016/j.jiec.2013.05.023 · DOI
  150. Silva, 2016, Mesoporous activated carbon from industrial laundry sewage sludge: adsorption studies of reactive dye Remazol Brilliant Blue, Rev. Chem. Eng. J., 303, 467, 10.1016/j.cej.2016.06.009 · DOI
  151. Silva, 2018, Mesoporous activated carbon fibers synthesized from denim fabric waste: efficient adsorbents for removal of textile dye from aqueous solutions, J. Clean. Prod., 171, 482, 10.1016/j.jclepro.2017.10.034 · DOI
  152. Soares, 2008, Nonylphenol in the environment: a critical review on occurrence, fate, toxicity, and treatment in wastewaters, Environ. Int., 34, 1033, 10.1016/j.envint.2008.01.004 · DOI
  153. Sonai, 2016, The application of textile sludge adsorbents for the removal of Reactive Red 2 dye, J. Environ. Manag., 168, 149
  154. Sun, 2013, Adsorption of reactive dyes on activated carbon developed from Enteromorpha prolifera, Am. J. Anal. Chem., 4, 17, 10.4236/ajac.2013.47A003 · DOI
  155. Suriani, 2009, Synthesis of vertically aligned carbon nanotubes using natural palm oil as carbon precursor, Mater. Lett., 63, 2704, 10.1016/j.matlet.2009.09.048 · DOI
  156. Tessmer, 1997, Impact of oxygen-containing surface functional groups on activated carbon adsorption of phenols, Environ. Sci. Technol., 31, 1872, 10.1021/es960474r · DOI
  157. Thitame, 2016, Adsorptive removal of reactive dyes from aqueous solution using activated carbon synthesized from waste biomass materials, International J. Environ. Sci. Technol., 13, 561, 10.1007/s13762-015-0901-3 · DOI
  158. Tran, 2017, Activated carbon derived from spherical hydrochar functionalized with triethylenetetramine: synthesis, characterizations, and adsorption application, Green Process. Synth., 6, 565
  159. Tran, 2018, Activated carbons from golden shower upon different chemical activation methods: synthesis and characterizations, Adsorpt. Sci. Technol., 36, 95, 10.1177/0263617416684837 · DOI
  160. Travlou, 2013, Graphite oxide/chitosan composite for reactive dye removal, Chem. Eng. J., 217, 256, 10.1016/j.cej.2012.12.008 · DOI
  161. Tuzen, 2018, Response surface optimization, kinetic and thermodynamic studies for effective removal of rhodamine B by magnetic AC/CeO2 nanocomposite, J. Environ. Manag., 206, 170
  162. Üner, 2018, The effect of carbonization temperature, carbonization time and impregnation ratio on the properties of activated carbon produced from Arundo donax, Microporous Mesoporous Mater., 268, 225, 10.1016/j.micromeso.2018.04.037 · DOI
  163. Vijayaraghavan, 2006, Biosorption of nickel(II) ions onto Sargassum wightii: application of two-parameter and three-parameter isotherm models, J. Hazard Mater., B133, 304, 10.1016/j.jhazmat.2005.10.016 · DOI
  164. Weber, 2018, Properties of biochar, Fuel, 217, 240, 10.1016/j.fuel.2017.12.054 · DOI · Paper page
  165. Wu, 2017, Activated biochar prepared by pomelo peel using H3PO4 for the adsorption of hexavalent chromium: performance and mechanism, Water Air Soil Pollut., 228, 405, 10.1007/s11270-017-3587-y · DOI
  166. Xie, 2009, A method for producing carbon nanotubes directly from plant materials, For. Prod. J., 59, 26
  167. Xing, 2017, Bioinspired polydopamine sheathed nanofibers containing carboxylate graphene oxide nanosheet for high-efficient dyes scavenger, ACS Sustain. Chem. Eng., 5, 4948, 10.1021/acssuschemeng.7b00343 · DOI
  168. Xu, 2019, Nitrogen-containing activated carbon of improved electrochemical performance derived from cotton stalks using indirect chemical activation, J. Colloid Interface Sci., 540, 285, 10.1016/j.jcis.2019.01.031 · DOI
  169. Yagub, 2014, Dye and its removal from aqueous solution by adsorption: a review, Adv. Colloid Interface Sci., 209, 172, 10.1016/j.cis.2014.04.002 · DOI · Paper page
  170. Yakout, 2016, Characterization of activated carbon prepared by phosphoric acid activation of olive stones, Arabian J. Chem., 9, S1155, 10.1016/j.arabjc.2011.12.002 · DOI
  171. Yakout, 2016, Dodecyl sulfate functionalized magnetic graphene oxide nanosheet for the investigation of fast and efficient removal of aqueous malachite green, J. Taiwan Inst. Chem. Eng., 63, 81, 10.1016/j.jtice.2016.03.027 · DOI
  172. Yang, 2014, Evaluation of adsorption potential of bamboo biochar for metal-complex dye: equilibrium, kinetics and artificial, neural network modeling, Int. J. Environ. Sci. Technol., 11, 1093, 10.1007/s13762-013-0306-0 · DOI
  173. Yang, 2020, Facile synthesis of novel porous graphene-like carbon hydrogel for highly efficient recovery of precious metal and removal of organic dye, Appl. Surf. Sci., 528, 146928, 10.1016/j.apsusc.2020.146928 · DOI
  174. Zambare, 2017, Ultrafast dye removal using ionic liquid graphene oxide sponge, ACS Sustain. Chem. Eng., 5, 6026, 10.1021/acssuschemeng.7b00867 · DOI
  175. Zhang, 2017, Preparation of highly porous carbon through activation of NH4Cl induced hydrothermal microsphere derivation of glucose, RSC Adv., 7, 6486, 10.1039/C6RA26141H · DOI
  176. Zhang, 2020, Laccase-Carbon nanotube nanocomposites for enhancing dyes removal, J. Clean. Prod., 242, 118425, 10.1016/j.jclepro.2019.118425 · DOI
  177. Zhao, 2015, Preparation and adsorption capacity evaluation of graphene oxide-chitosan composite hydrogels, Sci. China Mater., 58, 811, 10.1007/s40843-015-0090-x · DOI
  178. Zheng, 2017, Highly efficient simultaneous adsorption and biodegradation of a highly concentrated anionic dye by high-surface-area carbon-based biocomposites, Chemosphere, 179, 139, 10.1016/j.chemosphere.2017.03.096 · DOI
  179. Zheng, 2018, One-pot synthesis of sandwich-like MgO@Carbon with enhanced sorption capacity of organic dye, Chem. Eng. J., 334, 1399, 10.1016/j.cej.2017.10.156 · DOI
  180. Zhou, 2017, Biomass based nitrogen-doped structure-tunable versatile porous carbon materials, J. Mater. Chem., 5, 12958, 10.1039/C7TA02113E · DOI
  181. Ōya, 1982, Phenomena of catalytic graphitization, J. Mater. Sci., 17, 309, 10.1007/BF00591464 · DOI

Cited by

Sorted by citations

Metadata

Authors
Hassan, M. M., & Carr, C. M.
ORCID
Hassan, Mohammad M.
Venue
Chemosphere
Publisher
Elsevier BV
Published
2021-02
Volume
265
Pages
129087
ISSN
0045-6535
DOI
10.1016/j.chemosphere.2020.129087
Cited by
208
References
6
Language
en
Licence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review