The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
High strength, flexible and transparent nanofibrillated cellulose–nanoclay biohybrid films with tunable oxygen and water vapor permeability
Abstract
A novel, technically and economically benign procedure to combine vermiculite nanoplatelets with nanocellulose fibre dispersions into functional biohybrid films is presented. Nanocellulose fibres of 20 nm diameters and several micrometers in length are mixed with high aspect ratio exfoliated vermiculite nanoplatelets through high-pressure homogenization. The resulting hybrid films obtained after solvent evaporation are stiff (tensile modulus of 17.3 GPa), strong (strength up to 257 MPa), and transparent. Scanning electron microscopy (SEM) shows that the hybrid films consist of stratified nacre-like layers with a homogenous distribution of nanoplatelets within the nanocellulose matrix. The oxygen barrier properties of the biohybrid films outperform commercial packaging materials and pure nanocellulose films showing an oxygen permeability of 0.07 cm(3) μm m(-2) d(-1) kPa(-1) at 50% relative humidity. The oxygen permeability of the hybrid films can be tuned by adjusting the composition of the films. Furthermore, the water vapor barrier properties of the biohybrid films were also significantly improved by the addition of nanoclay. The unique combination of excellent oxygen barrier behavior and optical transparency suggests the potential of these biohybrid materials as an alternative in flexible packaging of oxygen sensitive devices such as thin-film transistors or organic light-emitting diode displays, gas storage applications and as barrier coatings/laminations in large volume packaging applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Self-citationUltrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Self-citationRecent innovations in barrier technologies for plastic packaging—a review
Lange, J., & Wyser, Y. (2003) · Packaging Technology and Science · doi:10.1002/pts.621 · Cited by 842
Oxygen and oil barrier properties of microfibrillated cellulose films and coatings
Aulin, C., Gällstedt, M., & Lindström, T. (2010) · Cellulose · doi:10.1007/s10570-009-9393-y · Cited by 749
Self-citationOxygen and aroma barrier properties of edible films: A review
Miller, K. S., & Krochta, J. M. (1997) · Trends in Food Science & Technology · doi:10.1016/s0924-2244(97)01051-0 · Cited by 729
Strength and barrier properties of MFC films
Syverud, K., & Stenius, P. (2009) · Cellulose · doi:10.1007/s10570-008-9244-2 · Cited by 592
Cussler, E. L., Hughes, S. E., Ward, W. J., & Aris, R. (1988) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)80877-7 · Cited by 573
Durability of nanosized oxygen-barrier coatings on polymers
Leterrier, Y. (2003) · Progress in Materials Science · doi:10.1016/s0079-6425(02)00002-6 · Cited by 509
Walther, A., Bjurhager, I., Malho, J.-M., Pere, J., Ruokolainen, J., Berglund, L. A., & Ikkala, O. (2010) · Nano Letters · doi:10.1021/nl1003224 · Cited by 467
Clay Nanopaper with Tough Cellulose Nanofiber Matrix for Fire Retardancy and Gas Barrier Functions
Liu, A., Walther, A., Ikkala, O., Belova, L., & Berglund, L. A. (2011) · Biomacromolecules · doi:10.1021/bm101296z · Cited by 412
Structure, mechanical and barrier properties of amylose and amylopectin films
Rindlav-Westling, A., Stading, M., Hermansson, A.-M., & Gatenholm, P. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(98)00025-3 · Cited by 390
Cellulose Nanofiber Orientation in Nanopaper and Nanocomposites by Cold Drawing
Sehaqui, H., Ezekiel Mushi, N., Morimune, S., Salajkova, M., Nishino, T., & Berglund, L. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2016766 · Cited by 351
Rational Design of Nanocomposites for Barrier Applications
Gusev, A. A., & Lusti, H. R. (2001) · Advanced Materials · doi:10.1002/1521-4095(200111)13:21<1641::aid-adma1641>3.0.co;2-p · Cited by 338
Lavorgna, M., Piscitelli, F., Mangiacapra, P., & Buonocore, G. G. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.054 · Cited by 334
Ultra barrier flexible substrates for flat panel displays
Burrows, P. E., Graff, G. L., Gross, M. E., Martin, P. M., Shi, M. K., Hall, M., Mast, E., Bonham, C., Bennett, W., & Sullivan, M. B. (2001) · Displays · doi:10.1016/s0141-9382(00)00064-0 · Cited by 305
Ultrastrong and High Gas-Barrier Nanocellulose/Clay-Layered Composites
Wu, C.-N., Saito, T., Fujisawa, S., Fukuzumi, H., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm300465d · Cited by 303
Yang, Q., Fukuzumi, H., Saito, T., Isogai, A., & Zhang, L. (2011) · Biomacromolecules · doi:10.1021/bm200766v · Cited by 272
Transparent Clay−Polymer Nano Brick Wall Assemblies with Tailorable Oxygen Barrier
Priolo, M. A., Gamboa, D., & Grunlan, J. C. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900820k · Cited by 224
Péroval, C., Debeaufort, F., Despré, D., & Voilley, A. (2002) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf0116449 · Cited by 200
Self-Organized Films from Cellulose I Nanofibrils Using the Layer-by-Layer Technique
Aulin, C., Johansson, E., Wågberg, L., & Lindström, T. (2010) · Biomacromolecules · doi:10.1021/bm100075e · Cited by 170
Self-citationMalho, J., Laaksonen, P. H., Walther, A., Ikkala, O. T., & Linder, M. B. (2012) · Biomacromolecules · doi:10.1021/bm2018189 · Cited by 151
Modification of cellulose acetate films using nanofillers based on organoclays
Rodríguez, F. J., Galotto, M. J., Guarda, A., & Bruna, J. E. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.05.004 · Cited by 134
Guan, Y., Yang, S., Zhang, Y., Xu, J. Z., Han, C. C.-C., & Kotov, N. A. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp061548g · Cited by 83
Flexible inorganic films and coatings
Ballard, D. G. H., & Rideal, G. R. (1983) · Journal of Materials Science · doi:10.1007/bf00560644 · Cited by 77
Biohybrid barrier films from fluidized pectin and nanoclay
Vartiainen, J., Tammelin, T., Pere, J., Tapper, U., & Harlin, A. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.06.031 · Cited by 57
Cited by
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Moisture and Oxygen Barrier Properties of Cellulose Nanomaterial-Based Films
Wang, J., Gardner, D. J., Stark, N. M., Bousfield, D. W., Tajvidi, M., & Cai, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03523 · Cited by 675
Nanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review
Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. J. (2017) · BioResources · doi:10.15376/biores.12.1.2143-2233 · Cited by 508
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Metadata
- Authors
- Aulin, C., Salazar-Alvarez, G., & Lindström, T.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 4
- Issue
- 20
- Pages
- 6622
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2033216678
- Cited by
- 260
- References
- 28
- FWCI
- 6.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.