Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Phenolic resin-based carbon spheres obtained by a slightly modified Stöber method are shown to be superior CO2 adsorbents. A direct KOH activation of polymeric spheres gave carbons with small micropores (<0.8 nm) and large specific surface area (2400 m2 g−1), which are able to adsorb an unprecedented amount of CO2 (up to 8.9 mmol g−1) at 0 °C and ambient pressure.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [20]
In the citing paper
“Sevilla et al. reported that CO2 uptake capacity was mainly determined by the volume of small micropores ( < 1nm) [20, 21].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [20]
In the citing paper
“It was illustrated the sample originated from the sunflower seeds has a higher CO 2 uptake compared to derived adsorbent from peanut shells.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
In the citing paper
“Derived carbon samples from the peanut shells upon activated with chemical agent, generally show a high pore volume and specific surface volume, which nominate them as an excellent candidate for gas capture and sequestration [221,222].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
In the citing paper
“The maximum CO 2 uptake by sunflower seed-originated adsorbent (activated by KOH at 973 K with KOH/carbon ratio of 1.25) was 7.05 mmol.g -1 at 0 ᵒC and 1 bar.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Characterization of metal-organic frameworks by water adsorption
Küsgens, P., Rose, M., Senkovska, I., Fröde, H., Henschel, A., Siegle, S., & Kaskel, S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.11.020 · Cited by 1,093
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Liu, J., Qiao, S. Z., Liu, H., Chen, J., Orpe, A., Zhao, D., & Lu, G. Q. (. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102011 · Cited by 871
Cited by
Items 201–300 of 415
From Hollow to Solid Carbon Spheres: Time-Dependent Facile Synthesis
Kukułka, W., Wenelska, K., Baca, M., Chen, X., & Mijowska, E. (2018) · Nanomaterials · doi:10.3390/nano8100861 · Cited by 38
“Furthermore, carbon spheres can act as catalysts in various reactions [23,24], and they are used for CO2 capture [25,26].”
BackgroundShi, W., Wang, R., Liu, H., Chang, B., Yang, B., & Zhang, Z. (2019) · RSC Advances · doi:10.1039/c9ra03659h · Cited by 39
Athari, M.-J., Tahmasebpoor, M., Azimi, B., Heidari, M. A., & Pevida, C. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2023.08.062 · Cited by 38
Chiang, Y., Wu, C.-Y., & Chen, Y.-J. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116040 · Cited by 36
Kiełbasa, K., Kamińska, A., Niedoba, O., & Michalkiewicz, B. (2021) · Materials · doi:10.3390/ma14237458 · Cited by 36
“9 [50] KOH activated carbon derived from raw molasses 5.”
BackgroundManmuanpom, N., Thubsuang, U., Dubas, S. T., Wongkasemjit, S., & Chaisuwan, T. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.004 · Cited by 35
N-doped monodisperse carbon nanospheres with high surface area for highly efficient CO2 capture
Shi, J., Cui, H., Xu, J., & Yan, N. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.120822 · Cited by 36
Choma, J., Jedynak, K., Fahrenholz, W., Ludwinowicz, J., & Jaroniec, M. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.11.051 · Cited by 36
Self-citationFar, H. M., Rewatkar, P. M., Donthula, S., Taghvaee, T., Saeed, A. M., Sotiriou‐Leventis, C., & Leventis, N. (2018) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201800333 · Cited by 34
Metal-free core-shell structured N-doped carbon/carbon heterojunction for efficient CO2 capture
Cai, R., You, B., Chen, M., & Wu, L. (2019) · Carbon · doi:10.1016/j.carbon.2019.05.001 · Cited by 34
Zhang, H., Wang, Z., Luo, X., Lu, J., Peng, S., Wang, Y., & Han, L. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00919 · Cited by 32
Zhou, J. P., Qiu, Z., Zhou, J., Si, W., Cui, H., & Zhuo, S. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.09.038 · Cited by 33
Development of mesoporous magnesium oxide–alumina composites for CO2 capture
Wang, F., Gunathilake, C. A., & Jaroniec, M. (2015) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.001 · Cited by 34
Self-citationDassanayake, A. C., & Jaroniec, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05523d · Cited by 36
Self-citationSang, Y., Chen, G., & Huang, J. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-2009-9 · Cited by 33
“9935), confirms that the Vultra is vital for CO2 capture [34].”
BackgroundEnhanced CO2 capture by cupuassu shell-derived activated carbon with high microporous volume
Junior, O. F. C., Gómez, I. C., Casco, M. E., Serafin, J., Silvestre‐Albero, J., Escandell, M. M., Hotza, D., & Rambo, C. R. (2022) · Carbon letters · doi:10.1007/s42823-022-00454-3 · Cited by 38
Deng, S., Chen, T., Zhao, T., Yao, X., Wang, B., Huang, J. G., Wang, Y., & Yu, G. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.10.061 · Cited by 34
Ge, W., Zhou, Z., Zhang, P., Zhang, Q., Cao, Z., Zhang, R., Yan, Y., & Dai, J. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.06.013 · Cited by 31
A Precursor‐Derived Ultramicroporous Carbon for Printing Iontronic Logic Gates and Super‐Varactors
Gellrich, C., Shupletsov, L., Galek, P., Bahrawy, A., Grothe, J., & Kaskel, S. (2024) · Advanced Materials · doi:10.1002/adma.202401336 · Cited by 32
Porous Carbons for Carbon Dioxide Capture
Lu, A., Hao, G., & Zhang, X.-Q. (2014) · Green chemistry and sustainable technology · doi:10.1007/978-3-642-54646-4_2 · Cited by 36
“9 mmol g−1) at 0 °C and ambient pressure [76].”
BackgroundYang, H., Zhang, X., Hong, Y., Sari, H. M. K., Zhou, Z., Sun, S., & Li, X. (2019) · ChemSusChem · doi:10.1002/cssc.201901330 · Cited by 31
Dense (non-hollow) carbon nanospheres: synthesis and electrochemical energy applications
Díez, N., Sevilla, M., & Fuertes, A. B. (2021) · Materials Today Nano · doi:10.1016/j.mtnano.2021.100147 · Cited by 33
Zhou, J. P., Li, Z., Xing, W., Zhu, T., Shen, H., & Zhuo, S. (2015) · Chemical Communications · doi:10.1039/c4cc10364e · Cited by 34
Li, X., Xue, Q., He, D., Zhu, L., Du, Y., Xing, W., & Zhang, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01612 · Cited by 31
Synthesis of S, N co-doped porous carbons from polybenzoxazine for CO2 capture
Jin, Z.-E., Wang, J., Zhao, R., Guan, T., Zhang, D., & Li, K. (2018) · New Carbon Materials · doi:10.1016/s1872-5805(18)60347-6 · Cited by 30
Carbon Spheres as CO2 Sorbents
Staciwa, P., Narkiewicz, U., Sibera, D., Moszyński, D., Wróbel, R. J., & Cormia, R. D. (2019) · Applied Sciences · doi:10.3390/app9163349 · Cited by 30
“, potassium oxalate [19], potassium hydroxide [20,30,31], and potassium carbonate [32].”
BackgroundBurrow, J. N., Pender, J. P., Guerrera, J. V., Wygant, B. R., Eichler, J. E., Calabro, D. C., & Mullins, C. B. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c01112 · Cited by 33
Ghosh, S., & Barron, A. R. (2017) · Sustainable Energy & Fuels · doi:10.1039/c6se00102e · Cited by 34
Preparation and characterisation of carbon spheres for carbon dioxide capture
Sibera, D., Narkiewicz, U., Kapica, J., Serafin, J., Michalkiewicz, B., Wróbel, R. J., & Morawski, A. W. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0601-8 · Cited by 29
Chiang, Y., & Chin, W.-T. (2022) · Nanomaterials · doi:10.3390/nano12091492 · Cited by 32
Liu, Z., Yang, Y., Du, Z., Xing, W., Komarneni, S., Zhang, Z., Gao, X., & Yan, Z. (2015) · Nanoscale Research Letters · doi:10.1186/s11671-015-1041-x · Cited by 28
“Jaroniec and Wickramaratne [20, 21] obtained phenolic resin-based carbon with unprecedented amount of CO2 (4.”
BackgroundInfluentialNiu, X., Feng, Y., Xu, Y., & Yang, W. (2021) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2021.103814 · Cited by 28
Junior, O. F. C., Gómez, I. C., Rodríguez-Reinoso, F., Silvestre‐Albero, J., Rambo, C. R., & Escandell, M. M. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.118671 · Cited by 28
Functional Activated Biocarbons Based on Biomass Waste for CO 2 Capture and Heavy Metal Sorption
Serafin, J., Kishibayev, K., Tokpayev, R., Khavaza, T., Atchabarova, А., Ibraimov, Z., Nauryzbayev, M., Sreńscek-Nazzal, J., Giraldo, L., & Moreno‐Piraján, J. C. (2023) · ACS Omega · doi:10.1021/acsomega.3c07120 · Cited by 36
Alkyl‐Linked Porphyrin Porous Polymers for Gas Capture and Precious Metal Adsorption
Hong, Y., Rozyyev, V., & Yavuz, C. T. (2021) · Small Science · doi:10.1002/smsc.202000078 · Cited by 27
Soni, R. U., Edlabadkar, V. A., Greenan, D. M., Rewatkar, P. M., Leventis, N., & Sotiriou‐Leventis, C. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c04170 · Cited by 27
Mahurin, S. M., Fulvio, P. F., Hillesheim, P. C., Nelson, K. M., Veith, G. M., & Dai, S. (2014) · ChemSusChem · doi:10.1002/cssc.201402338 · Cited by 28
Highly microporous polymer-based carbons for CO2 and H2 adsorption
Choma, J., Osuchowski, Ł. P., Marszewski, M., & Jaroniec, M. (2014) · RSC Advances · doi:10.1039/c3ra47278g · Cited by 29
Self-citationFabrication of Hierarchical N-doped Carbon Nanotubes for CO2 Adsorption
Wang, H., Xu, C., Zhou, Y., Zhao, W., Zhong, J., Huang, W., & Chen, R. (2019) · NANO · doi:10.1142/s1793292019500723 · Cited by 26
Modulating the porosity of N-doped carbon materials for enhanced CO 2 capture and methane uptake
Albeladi, N., & Mokaya, R. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta03273j · Cited by 27
Tangsathitkulchai, C., Naksusuk, S., Wongkoblap, A., Phadungbut, P., & Borisut, P. (2021) · Processes · doi:10.3390/pr9020201 · Cited by 25
“8 nm for maximum CO2 adsorption by phenolic resinbased activated carbon spheres [42,43], or with GCMC simulation of CO2 adsorption that predicted the highest adsorption density for 0.”
BackgroundThe influence of the synthesis pH on the morphology and adsorption properties of carbon spheres
Sobczuk, K. S., Pełech, I., Narkiewicz, U., Staciwa, P., Sibera, D., & Moszyński, D. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.155196 · Cited by 25
Microporous Borocarbonitrides BxCyNz: Synthesis, Characterization, and Promises for CO2 Capture
Mighri, R., Demirci, U. B., & ALAUZUN, J. G. (2023) · Nanomaterials · doi:10.3390/nano13040734 · Cited by 25
“g−1 for activated carbon spheres (at 0 °C) [63] but relatively low selectivity [61,64].”
BackgroundLi, Y., & Cao, M. (2015) · Chemistry - An Asian Journal · doi:10.1002/asia.201500185 · Cited by 25
Liu, Z., Du, Z., Xing, W., & Yan, Z. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.12.021 · Cited by 25
Gunathilake, C. A., Gangoda, M. E., & Jaroniec, M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11113j · Cited by 25
Self-citationXiao, Q., Wen, J., Guo, Y., Hu, J., Wang, J., Zhang, F., Tu, G., Zhong, Y., & Zhu, W. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03494 · Cited by 25
Aggarwal, P., Umar, F., & Paul, A. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c03047 · Cited by 27
Kim, D.-Y., Ma, C.-H., Jang, Y., Radhakrishnan, S., Ko, T. H., & Kim, B. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.129785 · Cited by 25
Nabipour, H., Wang, X., Song, L., & Hu, Y. Z. (2022) · Materials Today Sustainability · doi:10.1016/j.mtsust.2022.100265 · Cited by 24
Rao, L., Liu, S., Chen, J., Wang, L., An, L., Yang, P., & Hu, X. D. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03473 · Cited by 26
Edlabadkar, V. A., Soni, R. U., Doulah, A. B. M. S. U., Owusu, S. Y., Hackett, S., Bartels, J. M., Leventis, N., & Sotiriou‐Leventis, C. (2024) · Chemistry of Materials · doi:10.1021/acs.chemmater.3c01717 · Cited by 24
Cai, C., Fu, N., Zhou, Z., Wu, M., Yang, Z., & Liu, R. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02352 · Cited by 24
Mallesh, D., Swapna, S., Rajitha, P., Soujanya, Y., Sumana, C., & Lingaiah, N. (2023) · Carbon letters · doi:10.1007/s42823-023-00487-2 · Cited by 23
Chen, H., Guo, Y., Zhou, K. C., Wang, J., Zeng, Z., & Li, L. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.123993 · Cited by 25
Self-catalyzed strategy to form hollow carbon nanospheres for CO2 capture
Chen, A., Li, S., Yu, Y., Liu, L., Li, Y., Wang, Y., & Xia, K. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.108 · Cited by 23
Zhu, Y., Miao, Y., & Li, H. (2019) · Processes · doi:10.3390/pr7030173 · Cited by 22
“Furthermore, hierarchical materials are also promising in many applications, including water and air purification [23], gas separation [24], catalysis [25], chromatography [26], and energy storage [27].”
BackgroundLiu, X., Liu, J., Sun, C., Liu, H., Wang, W., Smith, E. F., Jiang, L., Chen, X., & Snape, C. E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta01417f · Cited by 25
The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2
Pełech, I., Staciwa, P., Sibera, D., Kusiak‐Nejman, E., Morawski, A. W., Kapica‐Kozar, J., & Narkiewicz, U. (2022) · Molecules · doi:10.3390/molecules27041387 · Cited by 22
Rensch, T., Chantrain, V., Sander, M., Grätz, S., & Borchardt, L. (2022) · ChemSusChem · doi:10.1002/cssc.202200651 · Cited by 22
Methane enrichment of biogas using carbon capture materials
Chinea, L., Slopiecka, K., Bartocci, P., Park, A. A., Wang, S., Jiang, D. Y., & Fantozzi, F. (2022) · Fuel · doi:10.1016/j.fuel.2022.126428 · Cited by 22
Querejeta, N., Gil, M. V., Rubiera, F., & Pevida, C. (2023) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.2210 · Cited by 28
Kwac, K., Lee, J. H., Choi, J. W., & Jung, Y. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b12404 · Cited by 22
Carbon beads with a well-defined pore structure derived from ion-exchange resin beads
He, P., Haw, K., Yan, S., Tang, L., Fang, Q., Qiu, S., & Valtchev, V. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04069b · Cited by 22
Dassanayake, A. C., Wickramaratne, N. P., Hossain, M. A., Perera, V. S., Jeskey, J., Huang, S. D., Shen, H., & Jaroniec, M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08454a · Cited by 25
Self-citationAbdalla, M. A., Zentou, H., Abdulhamid, M. A., Mohammed, M. G., Abdelnaby, M. M., & Abdelaziz, O. Y. (2024) · Fuel · doi:10.1016/j.fuel.2024.132961 · Cited by 22
Ghimire, P. P., Dassanayake, A. C., Wickramaratne, N. P., & Jaroniec, M. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.04.059 · Cited by 21
Self-citationLi, J., Cheng, T., Ma, X., Wu, H., & Yang, L. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.128604 · Cited by 21
Development of mesoporosity in carbon spheres obtained by Stöber method
Choma, J., Fahrenholz, W., Jamioła, D., Ludwinowicz, J., & Jaroniec, M. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.11.016 · Cited by 21
Self-citationDu, J., Yu, Y., Lv, H., Chen, C., Zhang, J., & Chen, A. (2018) · Journal of Nanoparticle Research · doi:10.1007/s11051-017-4109-y · Cited by 21
“1) is observed, which reveals the significant presence of micropores in the samples (Wickramaratne and Jaroniec 2013; Gong et al. 2016; Qie et al. 2013).”
BackgroundInfluentialZhao, J., Wen, X., Xu, H., Wen, Y., Lu, H., & Meng, X. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.02.252 · Cited by 21
Scalable preparation of nitrogen-enriched carbon microspheres for efficient CO 2 capture
Wang, M., Wang, J., Qiao, W., Ling, L., & Long, D. (2014) · RSC Advances · doi:10.1039/c4ra11647j · Cited by 20
Lin, F., Wang, Y., & Lin, Z. (2016) · RSC Advances · doi:10.1039/c5ra27738h · Cited by 20
Zhang, J., Yuan, R., Natesakhawat, S., Wang, Z., Zhao, Y., Yan, J., Liu, S., Lee, J., Luo, D., Gottlieb, E. R., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11910 · Cited by 20
Gunathilake, C. A., Dassanayake, R. S., Kalpage, C. S., & Jaroniec, M. (2018) · Materials · doi:10.3390/ma11112301 · Cited by 20
Self-citationWu, R., Hang, Y., Li, J., & Bao, A. (2022) · Surface and Interface Analysis · doi:10.1002/sia.7101 · Cited by 21
“25 Studies have shown that whether the adsorption material can effectively capture CO2 under atmospheric pressure depends to a large extent on the number of micropores less than 0.8 nm; therefore, the micropore structure is an important factor to improve CO2 adsorption capacity.26,27 Wickramaratne et al.28 prepared a…”
BackgroundInfluentialDirect synthesis of organic salt-derived porous carbons for enhanced CO 2 and methane storage
Alali, I., & Mokaya, R. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta00044c · Cited by 22
Zhang, M., Zhang, S., Liu, X., Chen, H., Ming, Y., Xu, Q., & Wang, Z. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-06297-2 · Cited by 21
Liu, Z., Zhu, Y., Du, Z., Xing, W., Komarneni, S., & Yan, Z. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0065-z · Cited by 18
Evolution of wood cell wall nanopore size distribution in the hygroscopic range
Shi, J., & Avramidis, S. (2019) · Holzforschung · doi:10.1515/hf-2018-0198 · Cited by 20
“Initial fast growth of the experimental sorption isotherms at very low RHi for a lot of microporous materials or materials with combined micropores and mesopores has been explained by micropore filling (Wickramaratne and Jaroniec 2013; Li and Wang 2013; Garcia-Martinez et al. 2014).”
BackgroundThe Application of Hollow Carbon Nanofibers Prepared by Electrospinning to Carbon Dioxide Capture
Chiang, Y., Chin, W.-T., & Huang, C.-C. (2021) · Polymers · doi:10.3390/polym13193275 · Cited by 19
Zou, Z., Zhang, Y., Zhang, H., & Jiang, C. (2016) · RSC Advances · doi:10.1039/c5ra23834j · Cited by 18
Liu, Y., Chen, Y., Tian, L., & Hu, R. (2016) · Journal of Porous Materials · doi:10.1007/s10934-016-0294-9 · Cited by 19
Zhou, J. P., Wang, X., & Xing, W. (2018) · Royal Society of Chemistry eBooks · doi:10.1039/9781788013352-00001 · Cited by 29
Amine‐Functionalized Porous Polymer Network for Highly Selective Absorption of CO2 Over N2
Lee, D., Zhang, C., & Gao, H. (2014) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201400504 · Cited by 20
Mhamane, D., Kim, M.-S., Park, B. H., Choi, H. S., Kim, Y. H., Aravindan, V., Phadkule, A., & Kim, K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11360a · Cited by 18
Magnesium and Nitrogen Co-Doped Mesoporous Carbon with Enhanced Microporosity for CO2 Adsorption
Lu, J., Jiao, C., Majeed, Z., & Jiang, H. (2018) · Nanomaterials · doi:10.3390/nano8050275 · Cited by 18
“8 nm) is essential for enhancing CO2 adsorption capacity [44].”
BackgroundCarbon Monoliths by Assembling Carbon Spheres for Gas Adsorption
Gao, S., Ge, L., Villacorta, B. S., Rufford, T. E., & Zhu, Z. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b04891 · Cited by 17
Direct and mild non-hydroxide activation of biomass to carbons with enhanced CO 2 storage capacity
Altwala, A., & Mokaya, R. (2022) · Energy Advances · doi:10.1039/d1ya00085c · Cited by 26
Xu, C., & Hedin, N. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.09.041 · Cited by 17
Cai, J., Lv, X., Xing, Y., & Zhao, X. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.10.004 · Cited by 18
Saran-Derived Carbons for CO2 and Benzene Sorption at Ambient Conditions
Dziura, A., Marszewski, M., Choma, J., de Souza, L. K. C., Osuchowski, Ł. P., & Jaroniec, M. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5004448 · Cited by 18
Self-citationChola, N. M., Gajera, P., Kulkarni, H., Kumar, G., Parmar, R., Nagarale, R. K., & Sethia, G. (2023) · ACS Omega · doi:10.1021/acsomega.2c07553 · Cited by 17
Hierarchical porous N-doped carbon xerogels for high performance CO2 capture and supercapacitor
Wang, S., Miao, J., Liu, M., Zhang, L., & Liu, Z. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.126285 · Cited by 16
Choi, M. S., Park, S., Lee, H., & Park, H. S. (2018) · Carbon letters · doi:10.5714/cl.2018.25.103 · Cited by 16
Preparation and Studies of Adsorption Properties of Microporous Carbon Spheres
Choma, J., Kloske, M., Dziura, A., Stachurska, K., & Jaroniec, M. (2016) · Engineering and Protection of Environment · doi:10.17512/ios.2016.2.1 · Cited by 16
Self-citationHsiao, S.-Y., You, S.-W., Wang, C., Deng, J., & Hsi, H. (2022) · Aerosol and Air Quality Research · doi:10.4209/aaqr.220010 · Cited by 16
“AC has garnered considerable attention for its remarkable properties: its predominant hydrophobicity, high thermal stability, low cost, chemical inertness, and low energy consumption for regeneration (Wickramaratne and Jaroniec, 2013).”
BackgroundCarbon Dioxide Adsorption over Activated Biocarbons Derived from Lemon Peel
Kiełbasa, K., Siemak, J., Sreńscek-Nazzal, J., Bestani, B., Roy, B., & Michalkiewicz, B. (2024) · Molecules · doi:10.3390/molecules29174183 · Cited by 15
New Metrics of Green Sorbents for CO2 Capturing
Eftaiha, A. F., Qaroush, A. K., Abu‐Daabes, M. A., Alsyouri, H. M., & Assaf, K. I. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.201900121 · Cited by 16
Biomass-derived microporous adsorbents for selective CO2 capture
Chowdhury, S., & Pan, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820084-1.00025-9 · Cited by 18
Metadata
- Authors
- Wickramaratne, N. P., & Jaroniec, M.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- ORCID
- Jaroniec, Mietek
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 1
- Pages
- 112-116
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2163709824
- Cited by
- 415
- References
- 24
- Citations by year
- 2026: 11 · 2025: 11 · 2024: 18 · 2023: 26 · 2022: 38 · 2021: 21 · 2020: 33 · 2019: 49 · 2018: 43 · 2017: 38 · 2016: 34 · 2015: 44 · 2014: 33 · 2013: 16
- FWCI
- 45.49
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry A (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- CO2 capture, CO2 adsorption, activated carbon, phenolic resin, carbon spheres, Stöber method, KOH activation, micropores, specific surface area
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.