Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Phenolic resin-based carbon spheres obtained by a slightly modified Stöber method are shown to be superior CO2 adsorbents. A direct KOH activation of polymeric spheres gave carbons with small micropores (<0.8 nm) and large specific surface area (2400 m2 g−1), which are able to adsorb an unprecedented amount of CO2 (up to 8.9 mmol g−1) at 0 °C and ambient pressure.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [20]
In the citing paper
“Sevilla et al. reported that CO2 uptake capacity was mainly determined by the volume of small micropores ( < 1nm) [20, 21].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [20]
In the citing paper
“It was illustrated the sample originated from the sunflower seeds has a higher CO 2 uptake compared to derived adsorbent from peanut shells.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
In the citing paper
“Derived carbon samples from the peanut shells upon activated with chemical agent, generally show a high pore volume and specific surface volume, which nominate them as an excellent candidate for gas capture and sequestration [221,222].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
In the citing paper
“The maximum CO 2 uptake by sunflower seed-originated adsorbent (activated by KOH at 973 K with KOH/carbon ratio of 1.25) was 7.05 mmol.g -1 at 0 ᵒC and 1 bar.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Characterization of metal-organic frameworks by water adsorption
Küsgens, P., Rose, M., Senkovska, I., Fröde, H., Henschel, A., Siegle, S., & Kaskel, S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.11.020 · Cited by 1,093
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Liu, J., Qiao, S. Z., Liu, H., Chen, J., Orpe, A., Zhao, D., & Lu, G. Q. (. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102011 · Cited by 871
Cited by
Items 101–200 of 415
Wang, Y., Hu, X., Hao, J., Ma, R., Guo, Q., Gao, H., & Bai, H. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b01454 · Cited by 83
Chomiak, K., Gryglewicz, S., Kierzek, K., & Machnikowski, J. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.07.026 · Cited by 85
Adeniran, B., Masika, E., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03565h · Cited by 80
Liu, J., Sun, N., Sun, C., Liu, H., Snape, C. E., Li, K., Wei, W., & Sun, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.036 · Cited by 85
Blankenship, L. S., & Mokaya, R. (2022) · Materials Advances · doi:10.1039/d1ma00911g · Cited by 101
Liu, L., Xie, Z.-H., Deng, Q., Hou, X.-X., & Yuan, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta09782k · Cited by 79
Promoting Ethylene Selectivity from CO2 Electroreduction on CuO Supported onto CO2 Capture Materials
Yang, H., Yang, H., Hong, Y., Zhang, P., Wang, T., Chen, L., Zhang, F., Wu, Q., Tian, N., Zhou, Z., et al. (2018) · ChemSusChem · doi:10.1002/cssc.201702338 · Cited by 80
Hollow Carbon Spheres with Abundant Micropores for Enhanced CO2 Adsorption
Li, X., Bai, S., Zhu, Z., Sun, J., Jin, X., Wu, X., & Liu, J. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b04131 · Cited by 78
Effect of relative humidity on adsorption breakthrough of CO2 on activated carbon fibers
Chiang, Y.-C., Chen, Y.-J., & Wu, C.-Y. (2017) · Materials · doi:10.3390/ma10111296 · Cited by 77
“It is believed that KOH activation generated a high fraction of fine pores (<1 nm) [39].”
BackgroundHighly selective CO2 capture by nitrogen enriched porous carbons
Cong, H., Zhang, M., Chen, Y., Chen, K., Hao, Y., Zhao, Y., & Feng, L. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.052 · Cited by 79
“15 bar) and 25 C is even comparable to the highest ever reported for various phenolic-resin-derived carbons [20,26].”
BackgroundLi, Y., Liu, N., Zhang, T., Wang, B., Wang, Y., Wang, L., & Wei, J. (2020) · Energy · doi:10.1016/j.energy.2020.118561 · Cited by 77
Wang, Y., Zou, H., Zeng, S., Pan, Y. H., Wang, R., Wang, X., Sun, Q., Zhang, Z., & Qiu, S. (2015) · Chemical Communications · doi:10.1039/c5cc03945b · Cited by 73
Wickramaratne, N. P., Perera, V. S., Park, B.-W., Gao, M., McGimpsey, G. W., Huang, S. D., & Jaroniec, M. (2013) · Chemistry of Materials · doi:10.1021/cm401124d · Cited by 73
Self-citationZhu, B., Li, K., Liu, J., Liu, H., Sun, C., Snape, C. E., & Guo, Z. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00438h · Cited by 71
Review and analysis of porous adsorbents for effective CO2 capture
Foorginezhad, S., Weiland, F., Chen, Y., Hussain, S., & Ji, X. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115589 · Cited by 79
Zhao, Z., Wang, Y., Li, M., & Yang, R. (2015) · RSC Advances · doi:10.1039/c5ra01569c · Cited by 74
Thunyaratchatanon, C., Luengnaruemitchai, A., Chaisuwan, T., Chollacoop, N., Chen, S., & Yoshimura, Y. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.06.015 · Cited by 75
New strategy to prepare ultramicroporous carbon by ionic activation for superior CO2 capture
Liu, Z., Zhang, Z., Jia, Z., Zhao, L., Zhang, T., Xing, W., Komarneni, S., Subhan, F., & Yan, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.184 · Cited by 75
Huo, Y., Peng, X., Liu, X., Li, H., & Luo, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19423 · Cited by 73
Heimböckel, R., Kraas, S., Hoffmann, F., & Fröba, M. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.08.095 · Cited by 71
Xia, K., Tian, X., Fei, S., & You, K. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.05.059 · Cited by 68
“[6] Wickramaratne NP, Jaroniec M.”
Kwiatkowski, M., Policicchio, A., Seredych, M., & Bandosz, T. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.11.019 · Cited by 70
Nitrogen-rich hierarchically porous polyaniline-based adsorbents for carbon dioxide (CO2) capture
Kutorglo, E. M., Hassouna, F., Beltzung, A., Kopecký, D., Sedlářová, I., & Šoóš, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.133 · Cited by 69
Li, D., Tian, Y., Li, L., Li, J., & Zhang, H. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0041-7 · Cited by 67
Porosity-Enhanced Polymers from Hyper-Cross-Linked Polymer Precursors
Ding, L., Gao, H., Xie, F., Li, W., Bai, H., & Li, L. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02715 · Cited by 66
Effects of Sulfur Doping and Humidity on CO2 Capture by Graphite Split Pore: A Theoretical Study
Li, X., Xue, Q., Chang, X., Zhu, L., Ling, C., & Zheng, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14281 · Cited by 67
O-containing hyper-cross-linked polymers and porous carbons for CO 2 capture
Liu, M., Shao, L., Huang, J., & Liu, Y. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.12.036 · Cited by 66
Promising activated carbons derived from common oak leaves and their application in CO2 storage
Serafin, J., & Junior, O. F. C. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107642 · Cited by 68
Nitrogen-doped porous carbon spheres derived from d-glucose as highly-efficient CO2 sorbents
Xu, L., Guo, L., Hu, G., Chen, J., Hu, X., Wang, S., Dai, W., & Fan, M. (2015) · RSC Advances · doi:10.1039/c5ra04421a · Cited by 64
Nitrogen-Doped Carbons: Remarkably Stable Materials for CO2 Capture
Sethia, G., & Sayari, A. (2014) · Energy & Fuels · doi:10.1021/ef500283e · Cited by 67
Liu, C., Wang, J., Li, J., Hu, X., Lin, P., Shen, J., Sun, X., Han, W., & Wang, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03748h · Cited by 61
de Souza, L. K. C., Gonçalves, A. A. S., Queiroz, L. S., Chaar, J. S., Filho, G. N. D. R., & da Costa, C. E. F. (2020) · Sustainable materials and technologies · doi:10.1016/j.susmat.2020.e00168 · Cited by 67
Shi, W., Yu, J., Liu, H., Gao, D., Yuan, A., & Chang, B. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c01040 · Cited by 61
Kim, H. S., Kang, M. S., & Yoo, W. C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b10552 · Cited by 64
Synthesis and applications of carbon nanospheres: A review
Yao, Y., Xu, J., Huang, Y., & Zhang, T. (2023) · Particuology · doi:10.1016/j.partic.2023.09.007 · Cited by 65
Lee, D., Zhang, C., Wei, C., Ashfeld, B. L., & Gao, H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13424e · Cited by 59
Chen, J., Sun, J., Chen, Y., Guo, Y., Han, D., Wang, R., & Zhao, C. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119270 · Cited by 58
Gunathilake, C. A., & Jaroniec, M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03916b · Cited by 58
Self-citationProbing the role of O-containing groups in CO2 adsorption of N-doped porous activated carbon
Wang, M., Fan, X., Zhang, L., Liu, J., Wang, B., Cheng, R., Li, M., Tian, J., & Shi, J. (2017) · Nanoscale · doi:10.1039/c7nr05977a · Cited by 57
Activated carbon derived from chitin aerogels: preparation and CO2 adsorption
Dassanayake, R. S., Gunathilake, C. A., Abidi, N., & Jaroniec, M. (2018) · Cellulose · doi:10.1007/s10570-018-1660-3 · Cited by 58
“Typically, chitosan is obtained from chitin after a deacetylation process, which can be achieved by enzymatic (Tokuyasu et al. 2000; Younes and Rinaudo 2015) or chemical processes (No andMeyers 1995; Younes and Rinaudo 2015) and the later process is commonly used for large scale production of…”
BackgroundSelf-citationTiwari, D., Bhunia, H., & Bajpai, P. K. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.04.088 · Cited by 58
Feng, A., Jia, Z., Yu, Q., Zhang, H., & Wu, G. (2018) · NANO · doi:10.1142/s1793292018500376 · Cited by 57
Modern approaches to studying gas adsorption in nanoporous carbons
Morris, J. R., Contescu, C. I., Chisholm, M. F., Cooper, V. R., Guo, J., He, L., Ihm, Y., Mamontov, E., Melnichenko, Y. B., Olsen, R., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10701a · Cited by 56
Haffner-Staton, E., Balahmar, N., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06407h · Cited by 56
Cox, M., & Mokaya, R. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00300e · Cited by 67
Liu, X., Sun, Y. M., Liu, J., Sun, C., Liu, H., Xue, Q., Smith, E. F., & Snape, C. E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06665 · Cited by 64
Xu, C., Ruan, C., Li, Y., Lindh, J., & Strømme, M. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201700147 · Cited by 61
Standing out the key role of ultramicroporosity to tailor biomass-derived carbons for CO2 capture
Querejeta, N., Gil, M. V., Pevida, C., & Centeno, T. A. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.04.016 · Cited by 59
Sun, J., Li, H., Liu, Q., Zhong, W., & Dong, W. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.165890 · Cited by 70
Enhanced CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from Commercial Phenolic Resin
Yue, L., Rao, L., Wang, L., Sun, Y. J., Wu, Z., DaCosta, H. F. M., & Hu, X. D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03646 · Cited by 58
He, X., Liu, J., Jiang, Y.-W., Muhammad, Y., Guan, H., Sun, J., Cui, X., Liao, D., & Tong, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.031 · Cited by 54
Activated Microporous Carbon Nanospheres for Use in Supercapacitors
Tsai, C.-Y., Tai, H., Su, C.-A., Chiang, L.-M., & Li, Y. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c02291 · Cited by 51
Shen, Z., Song, Y., Yin, C., Luo, X., Wang, Y., & Li, X. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111158 · Cited by 53
Ramar, V., & Balraj, A. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c02585 · Cited by 53
Cysteine-Assisted Tailoring of Adsorption Properties and Particle Size of Polymer and Carbon Spheres
Wickramaratne, N. P., Perera, V. S., Ralph, J. M., Huang, S. D., & Jaroniec, M. (2013) · Langmuir · doi:10.1021/la400408b · Cited by 52
Self-citationGuerrera, J. V., Burrow, J. N., Eichler, J. E., Rahman, M. Z., Namireddy, M. V., Friedman, K. A., Coffman, S. S., Calabro, D. C., & Mullins, C. B. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c00427 · Cited by 56
Balsamo, M., Silvestre‐Albero, A., Silvestre‐Albero, J., Erto, A., Rodríguez-Reinoso, F., & Lancia, A. (2014) · Langmuir · doi:10.1021/la500780h · Cited by 52
Ali, N., Babar, A. A., Zhang, Y., Iqbal, N., Wang, X., Yu, J., & Ding, B. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.10.034 · Cited by 50
Tetraethyl orthosilicate-assisted synthesis of nitrogen-containing porous carbon spheres
Ghimire, P. P., Gunathilake, C. A., Wickramaratne, N. P., & Jaroniec, M. (2017) · Carbon · doi:10.1016/j.carbon.2017.06.007 · Cited by 49
Self-citationCO2 Adsorption of Nitrogen-Doped Carbons Prepared from Nitric Acid Preoxidized Petroleum Coke
Yang, J., Yue, L., Lin, B., Wang, L., Zhao, Y., Lin, Y., Chang, K., DaCosta, H., & Hu, X. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01795 · Cited by 48
Fabrication of spherical biochar by a two-step thermal process from waste potato peel
Yang, X., Kwon, E. E., Dou, X., Zhang, M., Kim, K.-H., Tsang, D. C. W., & Ok, Y. S. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.01.052 · Cited by 49
Li, Y., Wang, Y., Chen, B., Wang, L., Yang, J., & Wang, B. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108847 · Cited by 48
Sun, N., Tang, Z., Wei, W., Snape, C. E., & Sun, Y. (2015) · Frontiers in Energy Research · doi:10.3389/fenrg.2015.00009 · Cited by 55
“The most used polymer precursors were phenolic resins due to their relatively low costs (An et al., 2009; Martin et al., 2011; de Souza et al., 2013; Garcia et al., 2013; Sun et al., 2013; Wickramaratne and Jaroniec, 2013).”
BackgroundInfluentialDing, N., Liu, J., & Ma, W. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.081 · Cited by 48
Plant derived porous graphene nanosheets for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2014) · RSC Advances · doi:10.1039/c4ra05522e · Cited by 47
Cooperative CO 2 adsorption promotes high CO 2 adsorption density over wide optimal nanopore range
Chen, L., Watanabe, T., Kanoh, H., Hata, K., & Ohba, T. (2017) · Adsorption Science & Technology · doi:10.1177/0263617417713573 · Cited by 48
“Furthermore, narrow pore sizes have been shown to be important for CO2 adsorption (Casco et al., 2014; Lee and Park, 2013; Marco-Lozar et al., 2014; Presser et al., 2011; Wickramaratne and Jaroniec, 2013).”
BackgroundResorcinol–formaldehyde resin-based porous carbon spheres with high CO2 capture capacities
Wang, X., Zhou, J. P., Xing, W., Liu, B., Zhang, J., Lin, H., Cui, H., & Zhuo, S. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.07.010 · Cited by 49
Phuriragpitikhon, J., Ghimire, P. P., & Jaroniec, M. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.09.071 · Cited by 50
Self-citationLiu, J., Zhang, A., Jiang, X., Zhang, G., Sun, Y., Liu, M., Ding, F., Song, C., & Guo, X. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b05478 · Cited by 47
Grundy, M., & Ye, Z. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04038d · Cited by 50
From a metal–organic framework to hierarchical high surface-area hollow octahedral carbon cages
Aijaz, A., Sun, J., Pachfule, P., Uchida, T., & Xü, Q. (2015) · Chemical Communications · doi:10.1039/c5cc04230e · Cited by 45
Low-cost hierarchical micro/macroporous carbon foams as efficient sorbents for CO 2 capture
Rodríguez, E., & García, R. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.09.002 · Cited by 51
“Several studies have demonstrated that their CO2 adsorption capacity at 25 oC and 1 bar is closely correlated with the content of narrow micropores [6-9].”
BackgroundEn-jie, W., Sui, Z., Sun, Y., Ma, Z., & Han, B. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b04370 · Cited by 45
Zhang, D., He, C., Zhao, J., Wang, J., & Li, K. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.03.059 · Cited by 45
Surface-modified spherical activated carbon materials for pre-combustion carbon dioxide capture
Sun, N., Sun, C., Liu, J., Liu, H., Snape, C. E., Li, K., Wei, W., & Sun, Y. (2015) · RSC Advances · doi:10.1039/c5ra02665b · Cited by 44
Preparation and adsorption properties of aerocellulose-derived activated carbon monoliths
Dassanayake, R. S., Gunathilake, C. A., Jackson, T., Jaroniec, M., & Abidi, N. (2016) · Cellulose · doi:10.1007/s10570-016-0886-1 · Cited by 47
“This observation was supported by earlier studies performed by Wickramaratne and co-workers, who showed that the CO2 adsorption under ambient conditions is mainly determined by the volume of ultramicropores (pore width [0.7 nm) (Wickramaratne and Jaroniec 2013).”
ResultInfluentialSelf-citationMesoporous Organosilica with Amidoxime Groups for CO2 Sorption
Gunathilake, C. A., & Jaroniec, M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5028742 · Cited by 46
Self-citationAlmasoudi, A., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00530a · Cited by 43
Wickramaratne, N. P., & Jaroniec, M. (2013) · Adsorption · doi:10.1007/s10450-013-9572-x · Cited by 43
“In addition, our previous studies showed that ultra-fine micropores are also responsible for low pressure CO2 uptake (Wickramaratne and Jaroniec 2013a, b).”
BackgroundSelf-citationYuan, M.-H., Wang, L., & Yang, R. T. (2014) · Langmuir · doi:10.1021/la501794z · Cited by 44
Ashourirad, B., Arab, P., Verlander, A., & El‐Kaderi, H. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00567 · Cited by 42
Tiwari, V. K., Chen, Z., Gao, F., Gu, Z., Sun, X. A., & Ye, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01114h · Cited by 42
Synthesis of functionalized 3D microporous carbon foams for selective CO2 capture
Liu, X., Wang, S., Sun, C., Liu, H., Stevens, L. A., Dwomoh, P. K., & Snape, C. E. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125459 · Cited by 46
Ahmed, R., Liu, G., Yousaf, B., Rehman, A., Munir, M. A. M., Irshad, S., Rashid, M., & Cheema, A. I. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.104646 · Cited by 42
Park, J. M., Woo, H. C., & Jhung, S. H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128641 · Cited by 42
Liu, X., Yang, F., Li, M., Wang, S., & Sun, C. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.154894 · Cited by 41
Mochizuki, Y., Bud, J., Byambajav, E., & Tsubouchi, N. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100237 · Cited by 75
Synthesis of nanoporous carbon with new activating agent for high-performance supercapacitor
Kumaresan, T. K., Gunasekaran, S. S., Kumar, E. S., Ashok, A., Meganathan, R., Pawar, V., Kalaivani, R., Andikkadu, M. S., Vediappan, K., Gnanamuthu, R., et al. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.02.017 · Cited by 40
Zeng, G., Lou, S., Ying, H., Wu, X., Dou, X., Ai, N., & Wang, J. (2018) · Journal of Chemistry · doi:10.1155/2018/4319149 · Cited by 44
Liu, K., Zhang, X., Zhang, C., Ren, G., Zheng, Z., Lv, Z., & Fan, C. (2019) · RSC Advances · doi:10.1039/c9ra01329f · Cited by 39
Pore Characteristics for Efficient CO2 Storage in Hydrated Carbons
Ren, M., Sevilla, M., Fuertes, A. B., Mokaya, R., Tour, J. M., & Jalilov, A. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17833 · Cited by 38
Li, Y., Wang, Y., Liu, N., Wang, B., & Dong, R. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.130732 · Cited by 38
Chen, G., Wang, X., Li, J., Hou, W., Zhou, Y. T., & Wang, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04842 · Cited by 40
Epoxy based oxygen enriched porous carbons for CO 2 capture
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.128 · Cited by 38
Walczak, R., Savateev, A., Heske, J., Tarakina, N. V., Sahoo, S. K., Epping, J. D., Kühne, T. D., Kurpil, B., Antonietti, M., & Oschatz, M. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00486f · Cited by 38
Li, H., Miao, Q., Chen, Y., Yin, M., Qi, H., Yang, M., Deng, Q., & Wang, S. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110040 · Cited by 38
Aljumialy, A. M., & Mokaya, R. (2020) · Materials Advances · doi:10.1039/d0ma00449a · Cited by 47
Seredych, M., Rodríguez-Castellón, E., & Bandosz, T. J. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.028 · Cited by 37
Tiwari, D., Goel, C., Bhunia, H., & Bajpai, P. K. (2016) · RSC Advances · doi:10.1039/c6ra18291g · Cited by 37
Liu, J., Liu, X., Sun, Y. M., Sun, C., Liu, H., Stevens, L. A., Li, K., & Snape, C. E. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201700115 · Cited by 47
Metadata
- Authors
- Wickramaratne, N. P., & Jaroniec, M.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- ORCID
- Jaroniec, Mietek
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 1
- Pages
- 112-116
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2163709824
- Cited by
- 415
- References
- 24
- Citations by year
- 2026: 11 · 2025: 11 · 2024: 18 · 2023: 26 · 2022: 38 · 2021: 21 · 2020: 33 · 2019: 49 · 2018: 43 · 2017: 38 · 2016: 34 · 2015: 44 · 2014: 33 · 2013: 16
- FWCI
- 45.49
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry A (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- CO2 capture, CO2 adsorption, activated carbon, phenolic resin, carbon spheres, Stöber method, KOH activation, micropores, specific surface area
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.