Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Phenolic resin-based carbon spheres obtained by a slightly modified Stöber method are shown to be superior CO2 adsorbents. A direct KOH activation of polymeric spheres gave carbons with small micropores (<0.8 nm) and large specific surface area (2400 m2 g−1), which are able to adsorb an unprecedented amount of CO2 (up to 8.9 mmol g−1) at 0 °C and ambient pressure.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [20]
In the citing paper
“Sevilla et al. reported that CO2 uptake capacity was mainly determined by the volume of small micropores ( < 1nm) [20, 21].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [20]
In the citing paper
“It was illustrated the sample originated from the sunflower seeds has a higher CO 2 uptake compared to derived adsorbent from peanut shells.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
In the citing paper
“Derived carbon samples from the peanut shells upon activated with chemical agent, generally show a high pore volume and specific surface volume, which nominate them as an excellent candidate for gas capture and sequestration [221,222].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
In the citing paper
“The maximum CO 2 uptake by sunflower seed-originated adsorbent (activated by KOH at 973 K with KOH/carbon ratio of 1.25) was 7.05 mmol.g -1 at 0 ᵒC and 1 bar.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [222]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Characterization of metal-organic frameworks by water adsorption
Küsgens, P., Rose, M., Senkovska, I., Fröde, H., Henschel, A., Siegle, S., & Kaskel, S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.11.020 · Cited by 1,093
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Liu, J., Qiao, S. Z., Liu, H., Chen, J., Orpe, A., Zhao, D., & Lu, G. Q. (. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102011 · Cited by 871
Cited by
Items 301–400 of 415
Pressureless and Low-Pressure Synthesis of Microporous Carbon Spheres Applied to CO2 Adsorption
Pełech, I., Sibera, D., Staciwa, P., Narkiewicz, U., & Cormia, R. D. (2020) · Molecules · doi:10.3390/molecules25225328 · Cited by 15
“The influence of porosity of carbon materials on CO2 uptake has been widely described [27,31,52].”
BackgroundZnO/Carbon Spheres with Excellent Regenerability for Post-Combustion CO2 Capture
Pełech, I., Sibera, D., Staciwa, P., Kusiak‐Nejman, E., Kapica‐Kozar, J., Wanag, A., Narkiewicz, U., & Morawski, A. W. (2021) · Materials · doi:10.3390/ma14216478 · Cited by 15
Gembo, R. O., Odisitse, S., & King’ondu, C. K. (2024) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-024-05457-3 · Cited by 17
Galeano, J. C. H., Serafin, J., Giraldo, L., Acevedo, Y. S. M., & Moreno‐Piraján, J. C. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.02.036 · Cited by 15
Tiwari, D., Kaur, S., Bhunia, H., & Bajpai, P. K. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.04.023 · Cited by 14
Liu, S., Sui, Z., Wang, T., Zhou, H., Liu, Y., & Han, B. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00147 · Cited by 14
Adsorptive removal of carbon dioxide using polyethyleneimine loaded glass fiber in a fixed bed
Wang, W., Zeng, Q., Li, M. K., Zheng, W., Christianson, D., & Economy, J. (2015) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.05.001 · Cited by 14
Optimal Activation of Porous Carbon for High Performance CO2 Capture
Lee, J. H., Kwac, K., Lee, H. J., Lim, S. Y., Jung, D. S., Jung, Y., & Choi, J. W. (2016) · ChemNanoMat · doi:10.1002/cnma.201600082 · Cited by 17
Wang, S.-T., & Hong, J. (2019) · ACS Omega · doi:10.1021/acsomega.9b00901 · Cited by 12
Yu, H.-C., You, S.-W., Wang, C., Deng, J., & Hsi, H. (2022) · Sustainable Environment Research · doi:10.1186/s42834-022-00162-7 · Cited by 13
Dubadi, R., & Jaroniec, M. (2023) · Nanomaterials · doi:10.3390/nano13152262 · Cited by 13
Self-citationThe Counterion Effect of Imidazolium‐Type Poly(ionic liquid) Brushes on Carbon Dioxide Adsorption
Li, N., Qu, R., Han, X., Lin, W., Zhang, H., & Zhang, Z. J. (2019) · ChemPlusChem · doi:10.1002/cplu.201800636 · Cited by 13
Hossain, F. (2020) · Journal of Water and Climate Change · doi:10.2166/wcc.2020.152 · Cited by 16
Selenium-doped phenolic resin spheres: Ultra-high adsorption capacity of noble metals
Qian, Z., Zhang, Y., Pan, X., Li, N., Zhu, J., & Zhu, X. (2019) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2019.06.019 · Cited by 13
Staciwa, P., Sibera, D., Pełech, I., Narkiewicz, U., Łojkowski, W., Dąbrowska, S., & Cormia, R. D. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110829 · Cited by 13
Khodabakhshi, S., Fulvio, P. F., Walton, K. S., Kiani, S., Niu, Y., Palmer, R. E., Barron, A. R., & Andreoli, E. (2024) · Carbon · doi:10.1016/j.carbon.2024.118940 · Cited by 12
Eshraghi, R., Fasihi, M., & Ghaemi, A. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104864 · Cited by 12
Wang, W., Zhang, C., Chen, B., Chu, Z., Zha, Z., & Qian, H. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.146130 · Cited by 12
Altwala, A., & Mokaya, R. (2022) · RSC Advances · doi:10.1039/d2ra02661a · Cited by 17
Dynamic studies on carbon dioxide capture using lignocellulosic based activated carbons
Balsamo, M., Tsyntsarski, B., Erto, A., BUDINOVA, T., Petrova, B., Petrov, N. V., & Lancia, A. (2015) · Adsorption · doi:10.1007/s10450-015-9711-7 · Cited by 13
Optimal activated carbon for separation of CO2 from (H2 + CO2) gas mixture
Zhang, X.-X., Xiao, P., Sun, C., Luo, G., Ju, J., Wang, X., Wang, H., & Yang, H. (2018) · Petroleum Science · doi:10.1007/s12182-018-0243-0 · Cited by 12
“Wickramaratne and Jaroniec (2013) synthesized phenolic resin-based carbon spheres obtained by a slightly modified Stober method, and found that it showed microporous carbon with fine pores (\ 1 nm) and high specific surface area (2400 m2/g) has high CO2 capture at 0 C and ambient pressures.”
CO2 Storage on Nanoporous Carbons
Sevilla, M., Ferrero, G. A., & Fuertes, A. B. (2019) · Green energy and technology · doi:10.1007/978-981-13-3504-4_11 · Cited by 16
Shingdilwar, S., Dolui, S., Kumar, D., & Banerjee, S. (2021) · Materials Advances · doi:10.1039/d1ma00891a · Cited by 12
Facile synthesis of flower-like carbon microspheres for carbon dioxide capture
Sharma, M., & Snyder, M. A. (2022) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2022.111801 · Cited by 13
Efficient Low-Pressure CO2 capture via ZIF-8 modified by deep eutectic solvents
Zhang, D., Zhang, C., Zhang, X., Tian, Y., Cheng, X., Zhu, X., & Wang, L. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.128359 · Cited by 11
Enhanced CO2 Adsorption on Nitrogen-Doped Carbon Materials by Salt and Base Co-Activation Method
Wei, R., Dai, X., & Shi, F. (2019) · Materials · doi:10.3390/ma12081207 · Cited by 12
Wu, P.-I., Hsu, Y.-T., Tseng, Y.-C., Subramani, R., Chen, Y.-S., Chang, C.-L., Leu, G.-S., & Teng, H. (2019) · ACS Omega · doi:10.1021/acsomega.9b02243 · Cited by 11
Synthesis of novel monolithic activated carbons from phenol–urea–formaldehyde resin
Zhao, W., Gao, H., & Fan, M. (2015) · RSC Advances · doi:10.1039/c5ra20736c · Cited by 11
Tang, X., Song, M. X., Lei, Y., & Wang, X. (2016) · International Journal of Green Energy · doi:10.1080/15435075.2016.1253578 · Cited by 11
Wang, M., Li, Y., Pan, M., Jia, X., Yin, D., Long, D., Wang, J., Qiao, W., & Ling, L. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700088 · Cited by 13
Adsorptive capture of CO 2 by amine‐impregnated activated carbon, pumice, and zeolite 4A
Öztürk, B., Demiral, S., & Özen, H. A. (2022) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.2172 · Cited by 11
Yao, S., Li, Z., Liu, Z., Geng, X., Dai, L., & Wang, Y. (2023) · ACS Omega · doi:10.1021/acsomega.3c05842 · Cited by 10
Sivadas, D. L., Narasimman, R., Rajeev, R., Prabhakaran, K., & Ninan, K. N. (2015) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2015.116 · Cited by 10
Facile Fabrication of Functional Mesoporous Polymer Nanospheres for CO2 Capture
Shingdilwar, S., Dolui, S., & Banerjee, S. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c04580 · Cited by 12
Evolution of porosity of activated carbon fibres prepared from pre-oxidized acrylic fibres
Carrott, P. J. M., Carrott, M. M. L. R., & Correia, P. F. M. M. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.01.027 · Cited by 10
Dodevski, V. M., Janković, B., Radović, I., Stojmenović, M. D., Čebela, M., Nikolić, Ž., Pagnacco, M. C., Panić, I., & Stanković, M. V. (2019) · Energy & Environment · doi:10.1177/0958305x19880878 · Cited by 10
Bifunctional mesoporous hybrid sol-gel prepared silicas for CO2 adsorption
Velikova, N., & Spassova, I. (2021) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-021-05641-8 · Cited by 10
CO2 adsorption studies on spherical carbon derived from resorcinol-formaldehyde resin and sugars
Staciwa, P., Sibera, D., Pełech, I., Narkiewicz, U., & Moszyński, D. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.111735 · Cited by 9
Wang, P., Liu, H., Zhu, W., Chen, W., Wang, X., Yang, L., Yang, B., Chen, Q., Cairang, L., & Cairang, Z. (2024) · Molecules · doi:10.3390/molecules29133153 · Cited by 10
“For example, some reports showed that the narrow micropores have a great contribution to the CO 2 capture capability [40,41].”
BackgroundGunathilake, C. A., Dassanayake, R. S., Fernando, C. A. N., & Jaroniec, M. (2022) · Journal of Composites Science · doi:10.3390/jcs6060168 · Cited by 9
Self-citationRobust graphene-based monoliths of homogeneous ultramicroporosity
Bandosz, T. J., Wang, S., Minami, D., & Kaneko, K. (2015) · Carbon · doi:10.1016/j.carbon.2015.01.045 · Cited by 9
A ribbon-like ultramicroporous conjugated polycarbazole network for gas storage and separation
Qiao, S., Wei, H., Wang, T., Huang, W., Gu, C., Yang, R., & Li, X. (2015) · New Journal of Chemistry · doi:10.1039/c5nj02567b · Cited by 9
Facile Single-Step Synthesis of Porous Carbons as Efficient CO2 Adsorbents
Liu, S., Li, Q., Wang, L., Ma, R., Zou, J., Huang, L., & Hu, X. D. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03233 · Cited by 9
Amine-doped PEBA membrane for CO2 capture
Hamalová, K., Neubertová, V., Vostiňáková, M., Fíla, V., & Kolská, Z. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.133695 · Cited by 9
Reaction-induced macropore formation enabling commodity polymer derived carbons for CO 2 capture
Obando, A. G., Robertson, M. A., Smith, P., Jha, S., Patton, D. L., & Qiang, Z. (2022) · New Journal of Chemistry · doi:10.1039/d2nj05434e · Cited by 9
Expanded graphite/phenolic resin-based carbon composite adsorbents for post-combustion CO 2 capture
Jin, Y., Huynh, C., Hawkins, S. C., & Su, S. (2015) · RSC Advances · doi:10.1039/c5ra09853j · Cited by 10
Effect of Hg on CO2 capture by solid sorbents in the presence of acid gases
Fernández-Miranda, N., García, S., Lopez-Anton, M. A., Martínez-Tarazona, M. R., Sanz-Pérez, E. S., & Maroto‐Valer, M. M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.158 · Cited by 10
Nano‐resoles‐Enabled Elegant Nanostructured Materials
Zhang, M., Yang, Y., & Yu, C. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201802136 · Cited by 9
Han, M., Li, J., & Yu, J. (2020) · Energy Technology · doi:10.1002/ente.202000351 · Cited by 9
Wang, B., Zhang, Z., Zhu, C., Zhang, L., Sun, N., Wei, W., & Sun, Y. (2016) · RSC Advances · doi:10.1039/c6ra02548j · Cited by 8
Liu, J., Li, B., Li, M., Hu, Y., Han, S., & Guo, X. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c02128 · Cited by 7
Park, K. H., Ko, B., Ahn, J., Park, T., Yoon, S. D., Shim, W., & Song, S. H. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c05600 · Cited by 7
Mochizuki, Y., Bud, J., Byambajav, E., & Tsubouchi, N. (2022) · Reaction Chemistry & Engineering · doi:10.1039/d2re00003b · Cited by 7
Saning, A., Dubadi, R., Chuenchom, L., Dechtrirat, D., & Jaroniec, M. (2023) · Separations · doi:10.3390/separations10050304 · Cited by 7
Self-citationChen, Z.-Y., He, Y., & Gao, H. (2014) · RSC Advances · doi:10.1039/c4ra03190c · Cited by 7
Activated Carbon Fibre Monoliths for Hydrogen Storage
Kunowsky, M., Marco-Lozar, J. P., & Linares-Solano, A. (2014) · Advances in science and technology · doi:10.4028/www.scientific.net/ast.93.102 · Cited by 7
“More recently, the storage interest has also reached carbon dioxide in relation to environmental applications (capture and transportation) [1-6].”
BackgroundLim, S. H., Kim, J. K., & Kang, Y. C. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144918 · Cited by 7
Zhang, K., & Zhang, H. J. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.4c12168 · Cited by 6
He, X., Zhao, T., Sun, Z., Islam, M. A., Eljamal, O., & Saha, B. B. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.110300 · Cited by 7
Asmaly, H. A., Elbager, M. A., Iqbal, A., & Elkhider, S. M. (2026) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2026.103411 · Cited by 7
Wang, K., Lin, G., Meng, J., Guo, J., Tan, B., Liu, S., Lin, Q., Wu, X., & Gao, X. (2024) · Waste Disposal & Sustainable Energy · doi:10.1007/s42768-024-00204-3 · Cited by 8
“Carbo-hydrate [10, 11], biomass waste [12, 13], pitch [14, 15], polymers [16], and coal [17– 22] are commonly chosen as carbon-containing precursors, and KOH is used as the activating agent.”
Biomass Waste Turning into Low-Cost Microporous Carbon Adsorbents for Post-Combustion CO2 Capture
Swapna, S., Ramesh, A., Venugopal, A., Mallesh, D., Vinod, G., Gangareddy, K., Shashikala, V., Prathap, C., & Radhika, M. (2024) · Russian Journal of General Chemistry · doi:10.1134/s1070363224050165 · Cited by 7
Liu, D., Li, J., Dong, J., Li, S., Feng, W., & Jia, B. (2019) · Processes · doi:10.3390/pr7110801 · Cited by 8
Development of High Yielded Sn-Doped Porous Carbons for Selective CO2Capture
Mane, S. T., Li, Y., Liu, X., & Sun, L. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00462 · Cited by 6
Zhang, X., & Lu, A. (2019) · Wiley eBooks · doi:10.1002/9781119091219.ch3 · Cited by 6
Morawski, A. W., Ćmielewska, K., Kusiak‐Nejman, E., Staciwa, P., Kapica‐Kozar, J., Ekiert, E. A., Pełech, I., & Narkiewicz, U. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2023.102553 · Cited by 5
Dong, Z., Wang, Y., Zhang, X., Guan, X., Zhang, C., Wu, W., & Fan, C. (2024) · Materials Letters · doi:10.1016/j.matlet.2024.135887 · Cited by 5
Dry and Wet CO2 Capture from Milk‐Derived Microporous Carbons with Tuned Hydrophobicity
Pokrzywinski, J., Aulakh, D., Verdegaal, W. M., Pham, V. H., Bilan, H. K., Marble, S., Mitlin, D., & Wriedt, M. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000001 · Cited by 10
Guo, Z., Wang, C., & Li, J. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1163605 · Cited by 5
“During combustion, char layer formed by the interaction between OAP and NE acts as the continuous ocean, whereas hollow carbon spheres formed by carbonization of HPMs([24]) serves as the island (Figure 7b and 7c).”
BackgroundAdsorption Mechanisms and AI‐Driven Discovery of Biomass‐Based CO 2 Sorbents
Hajiali, F., Chen, J., Zou, T., Renneckar, S. H., Gopaluni, R. B., Ellis, N., & Rojas, O. J. (2025) · Small · doi:10.1002/smll.202504877 · Cited by 7
Scalable production of wood carbon microspheres for high-efficiency carbon dioxide capture
Wang, X., Wang, Y., Li, X., Li, J., Xie, Y., Liang, D., & Gan, W. (2023) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2023.100161 · Cited by 5
Hypercrosslinked natural biopolymers with quasi-unimodal micropores for carbon capture
Ding, L., Wu, Y., Lu, G., Zhang, Y., Carta, M., Fan, X., & Lau, C. H. (2024) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2024.100305 · Cited by 8
Sun, J., Zhu, J., Tian, S., Yan, W., Feng, J., & Xiong, Y. (2021) · Environmental Science Nano · doi:10.1039/d1en00037c · Cited by 4
Enhanced Carbon Capture Behavior of Carbon Fibers via Ionic Liquid Modification
Mokhtarinori, N., Luo, H., Paul, R., Vautard, F., Fu, Y., Fan, J., Jiang, D., Yang, Z., & Dai, S. (2022) · ChemNanoMat · doi:10.1002/cnma.202200480 · Cited by 4
Enhancement of Lithium Storage Performance of Carbon Microflowers by Achieving a High Surface Area
Li, Y., Xiao, Y. Z., Wang, X., & Cao, M. (2014) · Chemistry - An Asian Journal · doi:10.1002/asia.201400087 · Cited by 4
PEI@Mg 2 SiO 4 : an efficient carbon dioxide and nitrophenol compounds adsorbing material
Chen, Z.-Y., Gao, H., & Yang, J. (2014) · RSC Advances · doi:10.1039/c4ra04928d · Cited by 4
Cai, C., Hou, Z., Huang, T., Li, K., Liu, Y., Fu, N., Han, S., & Zhou, Y. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700001 · Cited by 4
Kim, D., Yun, S., Chun, S., & Choi, J. (2018) · Macromolecular Research · doi:10.1007/s13233-018-6041-z · Cited by 4
Sanket, K., & Behera, S. K. (2026) · Materials Science and Engineering B · doi:10.1016/j.mseb.2026.119632 · Cited by 3
Qian, Z., Huang, X., Li, N., Pan, X., Zhu, J., & Zhu, X. (2018) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2018.08.009 · Cited by 3
Jin, Y., Hawkins, S. C., Huynh, C., & Su, S. (2015) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.1921 · Cited by 3
Kuo, J., Tsai, Y., Huang, P.-H., Lee, C.-H., & Lin, C. R. (2023) · Journal of Molecular Modeling · doi:10.1007/s00894-023-05450-6 · Cited by 3
“Wickramaratne and Jaroniec [11] investigated the effects of different carbon materials on CO2 capture and the relationship between material micropore diameter and the amount of CO2 adsorbed.”
BackgroundBrute force determination of the optimum pore sizes for CO 2 uptake in turbostratic carbons
Blankenship, L. S., Albeladi, N., Alkhaldi, T., Madkhali, A., & Mokaya, R. (2022) · Energy Advances · doi:10.1039/d2ya00149g · Cited by 5
Dong, W., Hu, X., Chen, Z., Duan, D., & Wu, Q. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2020.123295 · Cited by 3
Karimi, K., Bahmanzadegan, F., & Ghaemi, A. (2026) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2026.100190 · Cited by 2
Khan, M. F. H., Ahmed, I., Shovon, S. M., Akash, F. A., Leon, T. I., Rahman, A., & Chanda, R. K. (2026) · International Journal of Green Energy · doi:10.1080/15435075.2026.2637734 · Cited by 4
“Therefore, the abundance of ultra-micropores is more critical to the adsorption capacity than the total pore volume or surface area (Montoya et al. 2003; Presser et al. 2011; Wickramaratne and Jaroniec 2013).”
Eshraghi, R., Naderi, K., Ghaemi, A., & Fasihi, M. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105771 · Cited by 2
Lee, Y., Chen, Y., & Lee, W. (2022) · ChemistrySelect · doi:10.1002/slct.202200015 · Cited by 2
Polyaniline/aramid composite for carbon dioxide capture
Vostiňáková, M., Lupínková, S., Ryšánek, P., Stejskal, J., & Kolská, Z. (2023) · Polymer International · doi:10.1002/pi.6504 · Cited by 2
Pełech, I., Sibera, D., Staciwa, P., Sobczuk, K. S., & Narkiewicz, U. (2023) · Materials · doi:10.3390/ma16155227 · Cited by 2
Facile Synthesis of Nanoporous Carbons with High Surface Area and Their CO2 Adsorption Properties
Mitome, T., Uchida, Y., & Nishiyama, N. (2015) · Chemistry Letters · doi:10.1246/cl.150297 · Cited by 2
Zhang, A., Hou, K., Duan, H., Tan, W. L., Song, C., & Guo, X. (2015) · RSC Advances · doi:10.1039/c5ra19416d · Cited by 1
Liu, Q., Liu, Y., Zhang, Q., Wang, X., & Li, W. (2019) · Journal of Cluster Science · doi:10.1007/s10876-019-01667-9 · Cited by 1
Fatima, S. S., Borhan, A., & Faheem, M. (2021) · Springer proceedings in complexity · doi:10.1007/978-981-16-4513-6_10 · Cited by 1
Wurentuya, B., Ren, W., & Agula, B. (2024) · Materials science forum · doi:10.4028/p-wprzp7 · Cited by 1
“It can be said that micropores are an ideal location for CO 2 adsorption to occur[35].”
Theoretical simulation of CO2 capture by an $\text{A}{{\text{l}}_{11}}\text{Mg}_{3}^{-}$ cluster
Jiang, Y., Xie, X., Hamid, I., Chen, C., & Duan, H. (2017) · Materials Research Express · doi:10.1088/2053-1591/aa5fbf · Cited by 1
Investigation of Non-Thermodynamical CO2 Adsorption Behavior for Amine-Modified Nanoporous Silica
Yano, K., Setoyama, N., & Fukumori, K. (2020) · Advances in Materials Physics and Chemistry · doi:10.4236/ampc.2020.103005 · Cited by 1
“Various types of porous materials such as zeolite [3] [4] [5] [6] [7], porous carbons [8] [9] [10] [11] [12], MOFs [13] [14] [15] [16] [17], have been investigated as an adsorbent for CO2.”
BackgroundPark, K. H., Ko, B., Ahn, J., Park, T., Shim, W., & Song, S. H. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4582882 · Cited by 1
CO2 Storage Properties of Nanostructured Carbons by a Microwave Plasma Reactor
Tian, M., & Shang, C. (2015) · Journal of Nanomaterials · doi:10.1155/2015/650682
Mwandila, G., Musonda, G., & Mugala, A. (2016) · Chemical Engineering Communications · doi:10.1080/00986445.2015.1135794
“The adsorption of CO2 onto activated carbon is reportedly due to the binding in the pores of CO2 to carbon (Nilantha and Mietek, 2013).”
Background
Metadata
- Authors
- Wickramaratne, N. P., & Jaroniec, M.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- ORCID
- Jaroniec, Mietek
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 1
- Pages
- 112-116
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2163709824
- Cited by
- 415
- References
- 24
- Citations by year
- 2026: 11 · 2025: 11 · 2024: 18 · 2023: 26 · 2022: 38 · 2021: 21 · 2020: 33 · 2019: 49 · 2018: 43 · 2017: 38 · 2016: 34 · 2015: 44 · 2014: 33 · 2013: 16
- FWCI
- 45.49
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry A (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- CO2 capture, CO2 adsorption, activated carbon, phenolic resin, carbon spheres, Stöber method, KOH activation, micropores, specific surface area
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.