The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
PDMS lab-on-a-chip fabrication using 3D printed templates
Open accessAbstract
The fabrication of conventional PDMS on glass lab-on-a-chip (LOC) devices, using templates printed with a commercial (2299 US$) micro-stereo lithography 3D printer, is demonstrated. Printed templates replace clean room and photolithographic fabrication resources and deliver resolutions of 50 μm, and up to 10 μm in localized hindrances, whereas the templates are smooth enough to allow direct transfer and proper sealing to glass substrates. 3D printed templates accommodate multiple thicknesses, from 50 μm up to several mm within the same template, with no additional processing cost or effort. This capability is exploited to integrate silicone tubing easily, to improve micromixer performance and to produce multilevel fluidics with simple access to independent functional surfaces, which is illustrated by time-resolved glucose detection. The templates are reusable, can be fabricated in under 20 min, with an average cost of 0.48 US$, which promotes broader access to established LOC configurations with minimal fabrication requirements, relieves LOC fabrication from design skills and provides a versatile LOC development platform.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nguyen, N.-T., & Wu, Z. (2005) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/15/2/r01 · Cited by 1,652
Zhou, M., Diwu, Z., Panchuk-Voloshina, N., & Haugland, R. P. (1997) · Analytical Biochemistry · doi:10.1006/abio.1997.2391 · Cited by 1,396
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications
Lötters, J. C., Olthuis, W., Veltink, P. H., & Bergveld, P. (1997) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/7/3/017 · Cited by 827
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
Anderson, J. R., Chiu, D. T., Jackman, R. J., Cherniavskaya, O., McDonald, J. C., Wu, H., Whitesides, S. H., & Whitesides, G. M. (2000) · Analytical Chemistry · doi:10.1021/ac9912294 · Cited by 698
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484
Foudeh, A. M., Fatanat Didar, T., Veres, T., & Tabrizian, M. (2012) · Lab on a Chip · doi:10.1039/c2lc40630f · Cited by 457
Micro-stereolithography of polymeric and ceramic microstructures
Zhang, X., Jiang, X. N., & Sun, C. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(99)00189-2 · Cited by 450
A Review on Mixing in Microfluidics
Suh, Y. K., & Kang, S. (2010) · Micromachines · doi:10.3390/mi1030082 · Cited by 336
Fab@Home: the personal desktop fabricator kit
Malone, E., & Lipson, H. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776197 · Cited by 322
Towne, V., Will, M. L., Oswald, B., & Zhao, Q. (2004) · Analytical Biochemistry · doi:10.1016/j.ab.2004.07.037 · Cited by 134
Practical 3D Printers: The Science and Art of 3D Printing
Evans, B. (2012) · Apress eBooks · Cited by 72
Cited by
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges
Ng, W. L., Lee, J. M., Zhou, M., Chen, Y.-W., Lee, K.-X. A., Yeong, W. Y., & Shen, Y.-F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6034 · Cited by 402
3D-printed microfluidic devices
Amin, R., Knowlton, S., Hart, A., Yenilmez, B., Ghaderinezhad, F., Katebifar, S., Messina, M., Khademhosseini, A., & Tasoglu, S. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/022001 · Cited by 349
Nielsen, A. V., Beauchamp, M. J., Nordin, G. P., & Woolley, A. T. (2020) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-091619-102649 · Cited by 339
Metadata
- Authors
- Comina, G., Suska, A., & Filippini, D.
- Venue
- Lab Chip
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 14
- Issue
- 2
- Pages
- 424-430
- ISSN
- 1473-0189 (ISSN-L)
- 1473-0197
- OpenAlex
- W2016834507
- Cited by
- 278
- References
- 14
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.