CoChat

A comprehensive review of Pt electrocatalysts for the oxygen reduction reaction: Nanostructure, activity, mechanism and carbon support in PEM fuel cells

Open access
Sui, Sheng, Wang, Xiaoying, Zhou, Xintong, Su, Yuehong, Riffat, Saffa, Liu, Chang-jun · 2017 · Journal of Materials Chemistry A

The DOI matches its Crossref record; 140 of the 140 references it cites were found in a registry or an index; 8 of the 194 sources its claims cite were checked for support.

Abstract

This paper reviews progress in studies of the mechanism, nanostructure, size effect and carbon supports of Pt electrocatalysts for the ORR.

Overview

CoChat Summary

TL;DR

This review summarizes progress in Pt-based oxygen reduction reaction (ORR) electrocatalysts for PEM fuel cells, covering ORR theory, Pt nanostructure/morphology, particle-size effects, and carbon supports. It concludes that Pt remains the benchmark catalyst, with activity/stability governed by facet structure, particle size, alloying/core-shell design, and support interactions, while carbon corrosion and incomplete mechanistic understanding remain major challenges.

Key findings

  • Pt is the best single-metal ORR catalyst in acid, but ORR is about 5 orders of magnitude slower than hydrogen oxidation; the cathode typically contains 80–90% of stack Pt, and DOE targeted total Pt loading below 0.125 mg cm⁻² in 2017 versus present cathodes at ~0.4 mg cm⁻² or more.
  • Structure and composition strongly affect activity: Pt₃Ni(111) was reported as 90-fold more active than commercial Pt/C, PtₓGd NPs reached 3.6 A mg⁻¹ Pt at 0.9 V RHE, and an OH adsorption energy ~0.1 eV weaker than Pt(111) was linked to an 8-fold ORR improvement.
  • Pt particle size shows a non-monotonic effect: specific activity increased 4-fold from 1.3 to 2.2 nm, while maximum mass activity occurred at 2.2 nm; PtNi-MWCNT hybrids reached 0.51 A mg⁻¹ Pt and retained 89.6% after 2500 cycles (0.46 A mg⁻¹ Pt, 4% above the 2017–2020 DOE target of 0.44 A mg⁻¹ Pt).
  • Carbon support modifications can improve durability/activity: sulfur-doped graphene composites showed 2–3 times higher ORR catalytic activity than commercial Pt/C, and double-polymer-coated carbon nanotubes retained performance after 500,000 accelerated potential cycles with only 5% loss of initial fuel cell potential and 20% loss of maximum power density.

Methods

  • Narrative review of Pt-based ORR electrocatalysts for PEM fuel cells, synthesizing literature on ORR theory, reaction pathways, catalyst design, Pt structure/morphology, size effects, and carbon supports.
  • Draws on cited experimental and density functional theory (DFT) studies; the paper reports no new primary experiments, sample preparation, or statistical analysis of its own.
  • No systematic search strategy, inclusion criteria, or quantitative meta-analysis is described in the text.

Limitations

  • The paper states there is still no overwhelming consensus on the ORR mechanism due to lack of suitable experimental validation techniques that can accurately identify surface intermediate composition and coverage.
  • It states that Pt particle-size effects remain unresolved because studies used different electrolytes, samples, shapes, and agglomeration states, and because structure/defect control of supported Pt catalysts is difficult.
  • It states that present carbon support materials can hardly meet all requirements simultaneously—surface area, conductivity, electrochemical stability, and interaction with Pt NPs—and that no ideal commercial graphene is yet available. As a narrative review, it also lacks a systematic search or quantitative synthesis (evident from the text).

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1039/c6ta08580f

Cites

140 of 140 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Image 1
CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Fig. 1 Groupings of Pt-based electrocatalysts for ORR in PEM fuel cells.
Fig. 1 Groupings of Pt-based electrocatalysts for ORR in PEM fuel cells.CC-BY · From the PDF
Fig. 2 Schematic representation of the various possible ORR pathways. Reprinted with permission from ref. 33. Copyright (2010) John Wiley and Sons.
Fig. 2 Schematic representation of the various possible ORR pathways. Reprinted with permission from ref. 33. Copyright (2010) John Wiley and Sons.CC-BY · From the PDF
Fig. 3 ORR free-energy diagrams calculated for Pd/Fe/W (110) and Au/Ru/W (110) compared with that for Pt (111) (dashed black lines) for an electrode potential U ¼ 0.85 V. Reprinted with permission from ref. 55. Copyright (2012) American Chemical Society.
Fig. 3 ORR free-energy diagrams calculated for Pd/Fe/W (110) and Au/Ru/W (110) compared with that for Pt (111) (dashed black lines) for an electrode potential U ¼ 0.85 V. Reprinted with permission from ref. 55. Copyright (2012) American Chemical Society.CC-BY · From the PDF
Fig. 4 Schematic illustration of di ff erent shapes of Pt nanocrystals derived from conventional single-crystal polyhedra enclosed by the low-index planes (100) and (111). The fi rst column represents the perfect polyhedra; the second column contains the truncated forms of the perfect polyhedra; the third and fourth columns compromise the overgrown nanostructures and highly branched nanostructures grown from the corners of the perfect polyhedra, respectively. The yellow and blue colours represent the (100) and (111) facets, respectively. Reprinted with permission from ref. 56. Copyright (2009) Elsevier.
Fig. 4 Schematic illustration of di ff erent shapes of Pt nanocrystals derived from conventional single-crystal polyhedra enclosed by the low-index planes (100) and (111). The fi rst column represents the perfect polyhedra; the second column contains the truncated forms of the perfect polyhedra; the third and fourth columns compromise the overgrown nanostructures and highly branched nanostructures grown from the corners of the perfect polyhedra, respectively. The yellow and blue colours represent the (100) and (111) facets, respectively. Reprinted with permission from ref. 56. Copyright (2009) Elsevier.CC-BY · From the PDF
Fig. 5 Schematic illustration of tetrahexahedral (THH) nanocrystals with high-index planes. (A) TEM image of THH Pt nanocrystal recorded along the (001) direction. A careful measurement of the angles between the surfaces indicates that the pro fi les of the exposed surfaces are (730) planes ( a ¼ 133.6  , b ¼ 136.4  ). The inset is a (001) projected model of the THH. (B) Corresponding SAED pattern with square symmetry, showing the single-crystal structure of the THH Pt NC. (C) High-resolution TEM image recorded from the boxed area marked in (A). An amorphous thin layer is shown at the surface, which may be introduced by contamination during specimen handling and/ or TEM observation. (D) Atomic model of the Pt (730) plane with a high density of stepped surface atoms. The (730) surface is made of (210) and (310) subfacets. The local surface of THH Pt NC can be (210) if the size of the crystal surface increases, although the overall pro fi le of the facets is (730). (E) The image reveals the surface atomic steps. Reprinted with permission from ref. 57. Copyright (2007) The American Association for the Advancement of Science.
Fig. 5 Schematic illustration of tetrahexahedral (THH) nanocrystals with high-index planes. (A) TEM image of THH Pt nanocrystal recorded along the (001) direction. A careful measurement of the angles between the surfaces indicates that the pro fi les of the exposed surfaces are (730) planes ( a ¼ 133.6  , b ¼ 136.4  ). The inset is a (001) projected model of the THH. (B) Corresponding SAED pattern with square symmetry, showing the single-crystal structure of the THH Pt NC. (C) High-resolution TEM image recorded from the boxed area marked in (A). An amorphous thin layer is shown at the surface, which may be introduced by contamination during specimen handling and/ or TEM observation. (D) Atomic model of the Pt (730) plane with a high density of stepped surface atoms. The (730) surface is made of (210) and (310) subfacets. The local surface of THH Pt NC can be (210) if the size of the crystal surface increases, although the overall pro fi le of the facets is (730). (E) The image reveals the surface atomic steps. Reprinted with permission from ref. 57. Copyright (2007) The American Association for the Advancement of Science.CC-BY · From the PDF
Fig. 6 Synthesis procedure and structural model for mesoporous DG platinum. Reprinted with permission from ref. 2. Copyright (2012) American Chemical Society.
Fig. 6 Synthesis procedure and structural model for mesoporous DG platinum. Reprinted with permission from ref. 2. Copyright (2012) American Chemical Society.CC-BY · From the PDF
Fig. 7 Structures of atomically dispersed Pt species on the catalysts. (a -c) TEM images indicating the presence of ca. 4 nm Pt clusters in Pt/ ZTC (a), Pt clusters (1 -2 nm) in Pt/LSC (b), and the absence of discernable Pt species in Pt/HSC (c); scale bar, 30 nm. (d -f) To visualize the dispersion and structure of sub-nanometre Pt species, atomic resolution HAADF-STEM images are additionally provided for Pt/ZTC (d), Pt/LSC (e), and Pt/HSC (f); scale bar, 2 nm. (g -i) Histograms of the particle size distributions for Pt/ZTC (g), Pt/LSC (h), and Pt/HSC (i). The images reveal that Pt/LSC contains both atomically dispersed Pt species and Pt clusters. Pt/HSC contains mainly the atomically dispersed Pt species. Reprinted from ref. 30. Copyright © 2016, rights managed by Nature Publishing Group under a Creative Commons CCBY license.
Fig. 7 Structures of atomically dispersed Pt species on the catalysts. (a -c) TEM images indicating the presence of ca. 4 nm Pt clusters in Pt/ ZTC (a), Pt clusters (1 -2 nm) in Pt/LSC (b), and the absence of discernable Pt species in Pt/HSC (c); scale bar, 30 nm. (d -f) To visualize the dispersion and structure of sub-nanometre Pt species, atomic resolution HAADF-STEM images are additionally provided for Pt/ZTC (d), Pt/LSC (e), and Pt/HSC (f); scale bar, 2 nm. (g -i) Histograms of the particle size distributions for Pt/ZTC (g), Pt/LSC (h), and Pt/HSC (i). The images reveal that Pt/LSC contains both atomically dispersed Pt species and Pt clusters. Pt/HSC contains mainly the atomically dispersed Pt species. Reprinted from ref. 30. Copyright © 2016, rights managed by Nature Publishing Group under a Creative Commons CCBY license.CC-BY · From the PDF
Fig. 8 Size dependence of the speci fi c activity (blue diamond) and mass activity (red square) of Pt/C for ORR at 0.93 V. The speci fi c activity (open blue diamond) and mass activity (open red square) of state-of-the-art Pt/C from TKK (TEC10E50E, 46.7 wt%) with an average particle size of 2.5 nm is also included for comparison. The speci fi c and mass activities were calculated by normalizing the kinetic current to the electrochemical active surface and the Pt weight on the electrode, respectively. The Pt weight was calculated by the Cu UPD charge. Reprinted with permission from ref. 53. Copyright (2011) American Chemical Society.
Fig. 8 Size dependence of the speci fi c activity (blue diamond) and mass activity (red square) of Pt/C for ORR at 0.93 V. The speci fi c activity (open blue diamond) and mass activity (open red square) of state-of-the-art Pt/C from TKK (TEC10E50E, 46.7 wt%) with an average particle size of 2.5 nm is also included for comparison. The speci fi c and mass activities were calculated by normalizing the kinetic current to the electrochemical active surface and the Pt weight on the electrode, respectively. The Pt weight was calculated by the Cu UPD charge. Reprinted with permission from ref. 53. Copyright (2011) American Chemical Society.CC-BY · From the PDF
Fig. 9 Schematic illustration of structural change of the Pt -CeO x /C catalyst during pretreatment. Reprinted with permission from ref. 113. Copyright (2012) American Chemical Society.
Fig. 9 Schematic illustration of structural change of the Pt -CeO x /C catalyst during pretreatment. Reprinted with permission from ref. 113. Copyright (2012) American Chemical Society.CC-BY · From the PDF
Fig. 10 (a and b) HAADF-STEM image of Pt/Mn3O4/CNTs. (c -f) Elemental mapping of the selected part shown in (b). Reproduced with permission from ref. 114. Copyright (2013). The Royal Society of Chemistry.
Fig. 10 (a and b) HAADF-STEM image of Pt/Mn3O4/CNTs. (c -f) Elemental mapping of the selected part shown in (b). Reproduced with permission from ref. 114. Copyright (2013). The Royal Society of Chemistry.CC-BY · From the PDF
Fig. 11 Schematic illustrations of changes in Pt particle size distribution before and after the ADTs in Pt/CB and Pt/CB_O catalysts. Reproduced with permission from ref. 126. Copyright © 2016 Elsevier Ltd.
Fig. 11 Schematic illustrations of changes in Pt particle size distribution before and after the ADTs in Pt/CB and Pt/CB_O catalysts. Reproduced with permission from ref. 126. Copyright © 2016 Elsevier Ltd.CC-BY · From the PDF

Verification

Claims the paper makes

7 Valid · 5 Not valid · 157 Not checked · 50 Own results and interpretations

121 more claims

Create a free account to see all 219 claims and to verify the 6 references still open.

See all claims — free account
  • Probably not a substantial claim. 42
  • It may state two separate claims as one. 65

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 140 references

Research works printed but not linked: 1

  1. Inaba, 2006, Electrochim. Acta, 52, 1632, 10.1016/j.electacta.2006.03.094 · DOI · Paper page

Cited by

Items 301–400 of 924

Metadata

Authors
Sui, S., Wang, X., Zhou, X., Su, Y., Riffat, S., & Liu, C.-J.
Affiliations
  • University of Nottingham (GB)
  • Shanghai Jiao Tong University (CN)
  • Tianjin University (CN)
  • Collaborative Innovation Center of Chemical Science and Engineering
Corresponding author
Sui, Sheng
Venue
Journal of Materials Chemistry A
Published
2017
Volume
5
Issue
5
Pages
1808-1825
ISSN
  • 2050-7488 (ISSN-L)
  • 2050-7496
OpenAlex
W2560077433
Cited by
916
References
140
Citations by year
2026: 28 · 2025: 69 · 2024: 86 · 2023: 96 · 2022: 113 · 2021: 143 · 2020: 145 · 2019: 116 · 2018: 100 · 2017: 20
FWCI
21.36
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
  • Journal of Materials Chemistry A (publishedVersion, cc-by)
  • Repository@Nottingham (University of Nottingham) (acceptedVersion, other-oa)
  • Repository@Nottingham (University of Nottingham) (submittedVersion, cc-by)
  • Nottingham ePrints (University of Nottingham) (submittedVersion)
Funders
National Natural Science Foundation of China (21476157, 91334206)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
Keywords
platinum electrocatalysts, oxygen reduction reaction, proton exchange membrane fuel cells, nanostructures, size effect, carbon support, reaction mechanism, electrocatalytic activity

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.