The DOI matches its Crossref record; 156 of the 156 references it cites were found in a registry or an index; 11 of the 274 sources its claims cite were checked for support.
Recent progress in porphyrin-based materials for organic solar cells
Abstract
This article is written to provide an up-to-date review of porphyrin-based materials used in organic solar cells (OSCs).
Overview
CoChat Summary
TL;DR
This review surveys porphyrin-based materials for organic solar cells, covering polymers, dyads/triads, small-molecule donors and acceptors, ternary blends, and interlayers. It reports that A-π-D-π-A small-molecule donors and porphyrin-based acceptors have driven recent efficiency gains, with champion PCEs including 9.06% for D6:PC71BM, 11.03% for a ternary device, 12.5% for a tandem cell, and 7.4% for a porphyrin acceptor.
Key findings
- Porphyrin-containing polymers generally gave modest PCEs, from 0.017% for A4:PC61BM to 2.53% for A25:PC71BM, although A31:PC71BM reached 8.6% and was described as a breakthrough for porphyrin donor polymers.
- Small-molecule donors with A-π-D-π-A architectures performed best: D6:PC71BM reached 9.06% with Jsc = 19.58 mA cm⁻², D9 reached 9.08%, and E23:PC71BM reached 8.80% after solvent vapor annealing.
- Porphyrin-based acceptors improved sharply by 2017: H4 with four PDI units gave 7.4% with PBDB-T, while H5 gave 5.25% with PTB7-Th and H6 gave 1.9% with PDPP5T.
- Ternary blends and interlayers also improved performance: D5 in PTB7:PC71BM gave 11.03%, E4:E23:PC71BM gave 9.44%, and porphyrin interlayer J6 gave PCEs of 8.52% and 9.16% for PTB7/PC71BM and PTB7-Th/PC71BM.
Methods
- Narrative review of porphyrin-based photovoltaic materials, organized by material role and architecture: polymers, dyads/triads, single-, double-, and multiple-porphyrin small-molecule donors, small-molecule acceptors, ternary-blend sensitizers, and interlayers.
- Data are compiled from cited literature into tables of BHJ OSC photovoltaic parameters, including Jsc, Voc, FF, PCE, and charge-carrier mobilities; no new experimental synthesis or device data are reported.
- Main analysis is qualitative structure–property–performance comparison across molecular structures, device processing conditions, and blend morphology.
Limitations
- The review states that porphyrin polymers face low charge mobility, that hole mobilities often exceed electron mobilities causing unbalanced charge transport, that device stability remains a challenge, that reducing energy loss lacks clear guidelines, and that synthetic complexity/cost must be reduced for commercialization.
- It also states that early porphyrin-based acceptors were disappointing due to porphyrin’s electron-donating nature, donor–acceptor energy-level mismatch, and lack of optimal morphologies.
- Evident from the text: as a narrative review, example selection is not systematic and no meta-analysis is performed; cross-study PCE comparisons may be confounded by differing device architectures, processing conditions, and measurement protocols.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
10 Valid · 10 Not valid · 227 Not checked · 61 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“It has been proven in many cases that polymers with a high molecular weight could achieve a relatively high PCE. 31 -34”
What the sources say
- Not checked — no full text of the sourcecites [31] source
- Partly supportedcites [32] sourceExperimental — accuracy not yet measured
The indexed Abstract reports that purification of one copolymer raised its power conversion efficiency from 2.43% to 4.03%. It does not say that the purified polymer had a high molecular weight or establish a molecular-weight–PCE relationship across many cases. (LLM, conf=0.78)
- Not checked — no full text of the sourcecites [33] source
- Not checked — no full text of the sourcecites [34] source
hedgedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“NiO and MoO3 were used as oxide hole collection layers, which improved the V oc and FF.”
What the sources say
- Partly supportedcites [65] sourceExperimental — accuracy not yet measured
The Experimental Procedure describes NiO and MoOₓ as hole-collection layers, and Table II (Conclusions) shows higher Vₒ꜀ and FF with either oxide than without a buffer layer. The devices in that comparison use ZnTPP/C₆₀, however; the cited passages do not establish the claim for C7/C8-based OSCs. (LLM, conf=0.88)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Not surprisingly, it showed a relatively low e ffi ciency (0.15%).”
What the sources say
- Supportedcites [59] source
The photovoltaic-results passage reports a power-conversion efficiency of 0.15% for the BHJ device using the BP–C60 dyad. This figure applies to that device architecture; the paper reports 1.98% for its p-i-n BP–C60 device. No page number is available in our copy. (LLM, conf=0.88)
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The V oc increased with the thickness of porphyrin layers between 10 and 30 nm.”
What the sources say
- Partly supportedcites [65] sourceExperimental — accuracy not yet measured
The Conclusions state that open-circuit voltage increased as porphyrin-layer thickness rose from 10 to 30 nm, and the Results describe this trend for H₂TPP/C₆₀ devices. The cited paper does not establish the trend for the C7/C8-based devices specified in the claim. (LLM, conf=0.85)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The PCE of H5 is lower than that of H4 which contains four PDI groups.”
What the sources say
- Not checked — no full text of the sourcecites [131] source
- Could not verifycites [135] sourceExperimental — accuracy not yet measured
The Photovoltaic properties section (Table 2; page unavailable) reports PCEs for PTB7-Th:PDI–PZn–PDI devices under different additive conditions, not for compounds H4 and H5. Searches for H4, H5, and a four-PDI-group comparison found no passage in our copy establishing the claimed ranking. (LLM, conf=0.76)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
148 more claims
Create a free account to see all 308 claims and every source verdict.
- Probably not a substantial claim. 41
- It may state two separate claims as one. 128
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“| A30 : PC 61 BM (1 : 3) | 9.75 | 0.78 | 0.54 | 6.44”
Reported 6.44 · recomputed 4.1067
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“| C4 : PC 61 BM (1 : 1) | 7.97 | 0.48 | 0.28 | 1.45”
Reported 1.45 · recomputed 1.071168
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“The HOMO and LUMO values of G3 were found to be 5.63 and 3.55 eV, respectively, while the HOMO and LUMO energy levels of PC70BM were 6.2 and 3.95 eV; the di ff erence in the LUMO energy levels of the donor and acceptor is 0.47 eV.”
Reported 0.47 · recomputed 0.4
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“| B1 (triad) | 1.40 | 0.54 | 0.25 | 0.028”
Reported 0.028 · recomputed 0.189
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3. Porphyrin-containing polymers as electron donors
“Bucher et al. synthesized a polymer of poly(porphyrin -diketopyrrolopyrrole) ( A30 ) and used it as a donor to combine with PC71BM.”
§ 3. Porphyrin-containing polymers as electron donors
“| A30 : PC 61 BM (1 : 3) | 9.75 | 0.78 | 0.54 | 6.44”
2 more findings
Create a free account to see every finding of this check.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Small Molecule Organic Semiconductors on the Move: Promises for Future Solar Energy Technology
Mishra, A., & Bäuerle, P. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201102326 · Cited by 1,816
Small molecule semiconductors for high-efficiency organic photovoltaics
Lin, Y., Li, Y., & Zhan, X. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15313k · Cited by 1,751
Electron Transport Materials for Organic Light-Emitting Diodes
Kulkarni, A. P., Tonzola, C. J., Babel, A., & Jenekhe, S. A. (2004) · Chemistry of Materials · doi:10.1021/cm049473l · Cited by 1,624
Mihailetchi, V. D., Xie, H. X., de Boer, B., Koster, L. J. A., & Blom, P. W. M. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500420 · Cited by 1,283
Large π-Aromatic Molecules as Potential Sensitizers for Highly Efficient Dye-Sensitized Solar Cells
Imahori, H., Umeyama, T., & Ito, S. (2009) · Accounts of Chemical Research · doi:10.1021/ar900034t · Cited by 1,012
Meso-Substituted Porphyrins for Dye-Sensitized Solar Cells
Urbani, M., Grätzel, M., Nazeeruddin, M. K., & Torres, T. (2014) · Chemical Reviews · doi:10.1021/cr5001964 · Cited by 940
Maiti, N. C., Mazumdar, S., & Periasamy, N. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp9723372 · Cited by 805
Porphyrins and phthalocyanines in solar photovoltaic cells
Walter, M. G., Rudine, A. B., & Wamser, C. C. (2010) · Journal of Porphyrins and Phthalocyanines · doi:10.1142/s1088424610002689 · Cited by 668
Electrical characteristics and efficiency of single-layer organic light-emitting diodes
Malliaras, G. G., Salem, J. R., Brock, P. J., & Scott, C. (1998) · Physical Review B · doi:10.1103/physrevb.58.r13411 · Cited by 663
Research works printed but not linked: 1
- Giribabu, 2013, Curr. Sci., 104, 847
Cited by
Machine learning for high performance organic solar cells: current scenario and future prospects
Mahmood, A., & Wang, J.-L. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02838j · Cited by 378
Self-citationZhang, Z., Zhu, Y., Chen, X., Zhang, H., & Wang, J. (2019) · Advanced Materials · doi:10.1002/adma.201806626 · Cited by 355
Metal-Oxide Nanomaterials Synthesis and Applications in Flexible and Wearable Sensors
Yoon, Y., Truong, P. L., Lee, D., & Ko, S. H. (2022) · ACS Nanoscience Au · doi:10.1021/acsnanoscienceau.1c00029 · Cited by 313
Perspectives of 2D Materials for Optoelectronic Integration
An, J., Zhao, X., Zhang, Y., Liu, M., Yuan, J., Sun, X., Zhang, Z., Wang, B., Li, S., & Li, D. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202110119 · Cited by 274
Zeng, K., Tong, Z., Ma, L., Zhu, W.-H., Wu, W., & Xie, Y. (2020) · Energy & Environmental Science · doi:10.1039/c9ee04200h · Cited by 266
Metadata
- Authors
- Mahmood, A., Hu, J.-Y., Xiao, B., Tang, A., Wang, X., & Zhou, E.
- Affiliations
- Chinese Academy of Sciences (CN)
- Shaanxi Normal University (CN)
- Corresponding author
- Hu, Jian-Yong
- Tang, Ailing
- Zhou, Erjun
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2018
- Volume
- 6
- Issue
- 35
- Pages
- 16769-16797
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2886669164
- Semantic Scholar
- 88587f00b5bde3396f0bfbdb53c3daeeb782c655
- Cited by
- 311
- References
- 155
- Citations by year
- 2026: 20 · 2025: 35 · 2024: 45 · 2023: 63 · 2022: 37 · 2021: 33 · 2020: 38 · 2019: 34 · 2018: 6
- FWCI
- 10.62
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry A (publishedVersion)
- Funders
- Chinese Academy of Sciences (QYZDB-SSW-SLH033)
- National Natural Science Foundation of China (51673048, 51473040, 21602040, 21504019, 51773046)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Physical Sciences › Materials Science › Materials Chemistry › Porphyrin and Phthalocyanine Chemistry
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cancer Research › Photodynamic Therapy Research Studies
- Keywords
- porphyrins, organic solar cells, donor materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent progress in porphyrin-based materials for organic solar cells. https://app.cochat.ai/papers/10.1039/c8ta06392c
- The paper
- Mahmood, A., Hu, J.-Y., Xiao, B., Tang, A., Wang, X., & Zhou, E. (2018). Recent progress in porphyrin-based materials for organic solar cells. Journal of Materials Chemistry A. https://doi.org/10.1039/c8ta06392c
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.