High loading of NiFe active sites on a melamine formaldehyde carbon-based aerogel towards efficient bi-functional electrocatalysis for water splitting
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index; none of the 8 sources its claims cite is checked for support yet.
Abstract
Compared with precious metals, base metals have large abundance in the earth's crust and a much lower price.
Overview
CoChat Summary
TL;DR
NiFe ions were implanted into a melamine formaldehyde aerogel and carbonized to form high-loading (43 wt%) bifunctional electrocatalysts. The optimized aerogels showed enhanced HER/OER activity, and a two-electrode water-splitting cell operated at 1.63 V for 10 mA cm−2 and 1.75 V for 20 mA cm−2 with 100 h stability.
Key findings
- The NF13 aerogel had 43 wt% metal alloy and 11.3 wt% nitrogen; BET surface areas and pore volumes across samples were 148–264 m2 g−1 and 0.116–0.238 m3 g−1.
- HER overpotentials at the reported 100 mV cm−2 were 324 mV (NF04), 269 mV (NF13), 254 mV (NF22), 332 mV (NF31), and 366 mV (NF40); Tafel slopes were 99 mV dec−1 (NF22), 102 mV dec−1 (NF13), 112 mV dec−1 (NF04), 135 mV dec−1 (NF31), and 153 mV dec−1 (NF40), versus 52 mV dec−1 for commercial Pt/C.
- OER overpotentials at the reported 100 mV cm−2 were 435 mV (NF04), 382 mV (NF13), 441 mV (NF22), 515 mV (NF31), 589 mV (NF40), and 512 mV for commercial RuO2; NF13 had the smallest Tafel slope of 42 mV dec−1.
- A two-electrode cell using NF22 as cathode and NF13 as anode reached 10 mA cm−2 at 1.63 V (abstract) and required 1.75 V for 20 mA cm−2; it maintained 20 mA cm−2 at 1.75 V for 100 h with no obvious degradation.
Methods
- Synthesis: melamine and formaldehyde (1:4 molar ratio) in 6 wt% aqueous solution, NaOH to 1 mol L−1, ferric chloride and nickel chloride added at Ni:Fe ratios named NF04, NF13, NF22, NF31, and NF40, pH adjusted to 1.9, sol–gel at 95 °C for 12 h, then freeze-drying and carbonization. Metal ion concentration was capped at 0.9 M because higher concentrations prevented complete hydrogel formation.
- Characterization: SEM, TEM, EDS, XPS, XRD, Raman, and BET analysis.
- Electrochemistry: three-electrode tests in 1 M KOH at room temperature using catalyst slurry on nickel foam, graphite counter electrode, and Hg/HgO reference calibrated to RHE; HER/OER polarization, Tafel, EIS, EDLC, and chronoamperometry. Overall water splitting used a two-electrode configuration in 1.0 M KOH with NF22 cathode and NF13 anode.
Limitations
- Stated: metal ion concentration above 0.9 M disrupted the sol–gel process and prevented formation of a complete hydrogel, limiting metal loading; HER performance of prepared samples remained below commercial Pt/C; carbonization at 500 °C gave weak crystallinity, while higher temperatures could destroy the carbon skeleton and agglomerate metal ions.
- Stated: the two-electrode polarization curve for overall water splitting was reported without iR-correction (Fig. 6b caption).
- Evident from the text: some current-density units are inconsistent (“100 mV cm−2” for HER/OER overpotentials), and overall water-splitting values differ between the abstract (1.63 V at 10 mA cm−2) and the text (1.75 V at 20 mA cm−2), complicating direct comparison.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 2 Not valid · 1 Not checked · 30 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Similarly, the existence of metallic state iron and Fe3+ can be seen between 700 and 730 eV (Fig. 3d).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It can be seen from Fig. 2a and S3† that all diffraction peaks conform to the characteristic peaks of the ferronickel metallic compound (pdf 47-1417).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“As shown in the LSVs in Fig. 5a, the NF13 has the lowest overpotential among all prepared samples and commercial RuO2, suggesting that an appropriate metal atom ratio could lead to a better catalytic performance.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“From the LSV curves, we can see that the HER performance of commercial Pt/C is better than that of all the prepared samples (Fig. 4a).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, the decrease of metal content exhibits a negative effect on HER performance.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
14 more claims
Create a free account to see all 33 claims and every source verdict.
- Probably not a substantial claim. 10
- It may state two separate claims as one. 5
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ 4978 | Sustainable Energy Fuels, 2021, 5, 4973–4980
“In this work, the prepared aerogel-based bifunctional catalyst can achieve a low overpotential of 165 mV at 10 mA cm�2.”
§ 4978 | Sustainable Energy Fuels, 2021, 5, 4973–4980
“the aerogel-based alloy catalysts developed in this work exhibit a comparable performance of 420 mV at a current density of 10 mA cm�2.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“The aerogel- based catalyst also exhibits reliable stability aer 100 hours at 1.63 V for water splitting under alkaline conditions.”
§ 4978 | Sustainable Energy Fuels, 2021, 5, 4973–4980
“when the voltage was set at 1.75 V, the electrode system can achieve a stable current density of 20 mA cm�2, and aer 100 hours of continuous testing, the catalytic performance has no obvious degradation.”
Citations
Cites
Water photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts
Luo, J., Im, J.-H., Mayer, M. T., Schreier, M., Nazeeruddin, M. K., Park, N.-G., Tilley, S. D., Fan, H. J., & Grätzel, M. (2014) · Science · doi:10.1126/science.1258307 · Cited by 2,509
Jin, H., Wang, J., Su, D., Wei, Z., Pang, Z., & Wang, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5127165 · Cited by 1,765
Sivanantham, A., Ganesan, P., & Shanmugam, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600566 · Cited by 1,388
Gao, X., Zhang, H., Li, Q., Yu, X., Hong, Z., Zhang, X., Liang, C., & Lin, Z. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201600525 · Cited by 884
Tang, T., Jiang, W.-J., Niu, S., Liu, N., Luo, H., Chen, Y.-Y., Jin, S.-F., Gao, F., Wan, L.-J., & Hu, J.-S. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b03507 · Cited by 880
Graphene aerogels for efficient energy storage and conversion
Mao, J., Iocozzia, J., Huang, J., Meng, K., Lai, Y., & Lin, Z. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03031b · Cited by 868
Carbon-Based Single-Atom Catalysts for Advanced Applications
Gawande, M. B., Fornasiero, P., & Zbořil, R. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04217 · Cited by 750
Gao, X., Zhang, H., Li, Q., Yu, X., Hong, Z., Zhang, X., Liang, C., & Lin, Z. (2016) · Angewandte Chemie · doi:10.1002/ange.201600525 · Cited by 631
You, B., Jiang, N., Sheng, M., Gul, S., Yano, J., & Sun, Y. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02877 · Cited by 631
Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries
Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y.-B., Kang, F., & Li, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.019 · Cited by 478
Yu, Y., Zhou, J., & Sun, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000570 · Cited by 378
Nakaya, Y., Hirayama, J., Yamazoe, S., Shimizu, K.-I., & Furukawa, S. (2020) · Nature Communications · doi:10.1038/s41467-020-16693-9 · Cited by 317
Aerogel Production: Current Status, Research Directions, and Future Opportunities
Smirnova, I., & Gurikov, P. (2018) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2017.12.037 · Cited by 300
Hierarchical Mesoporous MXene–NiCoP Electrocatalyst for Water-Splitting
Yue, Q., Sun, J., Chen, S., Zhou, Y., Li, H., Chen, Y., Zhang, R., Wei, G., & Kang, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01303 · Cited by 230
Jin, H., Sultan, S., Ha, M., Tiwari, J. N., Kim, M. G., & Kim, K. S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000531 · Cited by 225
Septiani, N. L. W., Kaneti, Y. V., Fathoni, K. B., Kani, K., Allah, A. E., Yuliarto, B., Nugraha, Dipojono, H. K., Alothman, Z. A., Golberg, D., et al. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02385 · Cited by 195
Du, S., Ren, Z., Zhang, J., Wu, J., Xi, W., Zhu, J., & Fu, H. (2015) · Chemical Communications · doi:10.1039/c5cc01080b · Cited by 171
Nanovoid Incorporated IrxCu Metallic Aerogels for Oxygen Evolution Reaction Catalysis
Shi, Q., Zhu, C., Zhong, H., Su, D., Li, N., Engelhard, M. H., Xia, H., Zhang, Q., Feng, S., Beckman, S. P., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01338 · Cited by 168
Septiani, N. L. W., Kaneti, Y. V., Fathoni, K. B., Guo, Y., Ide, Y., Yuliarto, B., Jiang, X., Nugraha, N., Dipojono, H. K., Golberg, D. V., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta13442e · Cited by 155
Kang, Q., Li, M., Shi, J., Lu, Q., & Gao, F. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00795 · Cited by 150
Facile Synthesis of Nanoporous Transition Metal‐Based Phosphates for Oxygen Evolution Reaction
Bhanja, P., Kim, Y., Paul, B., Lin, J., Alshehri, S. M., Ahamad, T., Kaneti, Y. V., Bhaumik, A., & Yamauchi, Y. (2020) · ChemCatChem · doi:10.1002/cctc.201901803 · Cited by 144
Direct Structure–Performance Comparison of All‐Carbon Potassium and Sodium Ion Capacitors
(2019) · doi:10.1002/advs.201802272 · Cited by 143
Self-citationHu, H., Li, Y., Shao, Y.-R., Li, K., Deng, G., Wang, C., & Feng, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229269 · Cited by 114
Atomically dispersed catalysts for hydrogen/oxygen evolution reactions and overall water splitting
Zhang, Q., & Guan, J. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228446 · Cited by 106
Zhou, Y., Zhang, G., Yu, M., Wang, X., Lv, J., & Yang, F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00586 · Cited by 87
Pan, Q., & Wang, L. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229335 · Cited by 80
Efficient Co-doped pyrrhotite Fe0.95S1.05 nanoplates for electrochemical water splitting
Zheng, D., Jing, Z., Zhao, Q., Kim, Y., Li, P., Xu, H., Li, Z., & Lin, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125069 · Cited by 72
Shanmugam, P., Murthy, A. P., Theerthagiri, J., Wei, W., Madhavan, J., Kim, H.-S., Maiyalagan, T., & Xie, J. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.03.225 · Cited by 66
Zhao, W., Lu, X., Selvaraj, M., Wei, W., Jiang, Z., Ullah, N., Liu, J., & Xie, J. (2018) · Nanoscale · doi:10.1039/c8nr02852d · Cited by 64
Jin, Y., Chen, F., Wang, J., Guo, L., Jin, T., & Liu, H. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226798 · Cited by 60
Li, W., Yu, B., Hu, Y., Wang, X., Wang, B., Zhang, X., Yang, D., Wang, Z., & Chen, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228015 · Cited by 59
Das, S., Ghosh, R., Routh, P., Shit, A., Mondal, S., Panja, A., & Nandi, A. K. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00373 · Cited by 59
Niu, H.-J., Chen, Y.-P., Sun, R., Wang, A.-J., Mei, L.-P., Zhang, L., & Feng, J.-J. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229107 · Cited by 51
Narendra Kumar, A. V., Li, Y., Yu, H., Yin, S., Xue, H., Xu, Y., Li, X., Wang, H., & Wang, L. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.08.103 · Cited by 42
Water‐Splitting Based and Related Therapeutic Effects: Evolving Concepts, Progress, and Perspectives
Cui, X., Zhao, Q., Huang, Z., Xiao, Y., Wan, Y., Li, S., & Lee, C. (2020) · Small · doi:10.1002/smll.202004551 · Cited by 40
Dispersive Single-Atom Metals Anchored on Functionalized Nanocarbons for Electrochemical Reactions
Li, J., Wei, Z., Liu, D., Du, D., Lin, Y., & Shao, M. (2019) · Topics in Current Chemistry · doi:10.1007/s41061-018-0229-9 · Cited by 37
Liu, W., Bao, J., Xu, L., Guan, M., & Lei, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229099 · Cited by 34
Chen, Z. D., Li, W., Yang, J. W., Liao, J., Chen, C., Song, Y., Shah, S. A. A., Xu, Z., & Wu, M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6a84 · Cited by 31
Self-citationPorphyrin and macrocycle derivatives for electrochemical water splitting
Li, Q., Bao, Y., & Bai, F. (2020) · MRS Bulletin · doi:10.1557/mrs.2020.168 · Cited by 26
Cui, B., Zhang, J., Liu, S., Liu, X., Zhang, Z., & Sun, J. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.02.087 · Cited by 23
(2019) · doi:10.1016/j.apsusc.2019.144909 · Cited by 17
Self-citation
Research works printed but not linked: 6
- Kaneti, 2021, Chem. Eng. J., 405
- Luo, 2020, Chem. Eng. J., 383, 20
- Wang, 2020, Catalysts, 10, 22
- Bi, 2020, Research (Wash D C), 2020, 9140841
- Li, 2020, Adv. Energy Mater., 10, 20
- Zhou, 2020, Appl. Catal., B, 263, 10
Cited by
Sol–gel-derived nanostructured electrocatalysts for oxygen evolution reaction: a review
De, A., Kim, M. S., Adhikari, A., Patel, R., & Kundu, S. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta01442a · Cited by 64
Review on the preparation and application of lignin-based carbon aerogels
Wu, C.-W., Li, P.-H., Wei, Y.-M., Yang, C., & Wu, W.-J. (2022) · RSC Advances · doi:10.1039/d2ra01402e · Cited by 41
Carbon aerogel supported Ni–Fe catalysts for superior oxygen evolution reaction activity
Asim, M., Hussain, A., Samancı, M., Janjua, N. K., & Yurtcan, A. B. (2024) · Carbon letters · doi:10.1007/s42823-024-00730-4 · Cited by 32
Progress on nanostructured gel catalysts for oxygen electrocatalysis
Yang, H., Hu, H., Xia, C., You, F. X., Yao, J., Jiang, X., & Xia, B. Y. (2022) · Nano Research · doi:10.1007/s12274-022-4677-8 · Cited by 19
Ruthenium nanoparticles supported on S-doped graphene as an efficient HER electrocatalyst
Jia, H.-L., Cheng-lin, G., Chen, R., Zhao, J., Liu, R., & Guan, M. (2021) · New Journal of Chemistry · doi:10.1039/d1nj04765e · Cited by 11
Metadata
- Authors
- Chen, Z., Zhang, S., Yang, J., Chen, C., Song, Y., Xu, C., Wu, M., & Liao, J.
- Affiliations
- University of Electronic Science and Technology of China (CN)
- Corresponding author
- Liao, Jiaxuan
- Venue
- Sustainable Energy & Fuels
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2021
- Volume
- 5
- Issue
- 19
- Pages
- 4973-4980
- ISSN
- 2398-4902 (ISSN-L)
- OpenAlex
- W3195124120
- Semantic Scholar
- 3dbeebb1ae597704ec9979f545df5e9e9686d3d4
- Cited by
- 9
- References
- 42
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 2 · 2022: 2 · 2021: 2
- FWCI
- 0.28
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Sustainable Energy & Fuels (publishedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Keywords
- NiFe electrocatalyst, bifunctional electrocatalysis, water splitting, hydrogen evolution reaction, oxygen evolution reaction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.