Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index; 1 of the 27 sources its claims cite were checked for support.

Crystallization, thermal and mechanical properties of stereocomplexed poly(lactide) with flexible PLLA/PCL multiblock copolymer

Open access
Jing, Zhanxin, Huang, Xiaolan, Liu, Xinqi, Liao, Mingneng, Zhang, Zhaoxia, Li, Yong · 2022 · RSC Advances

Abstract

The PLLA/PCL multi-block copolymer was introduced into the stereocomplexed PLA matrix, and its effect on the crystallization, thermal and mechanical properties of the stereocomplexed PLA was discussed.

Overview

CoChat Summary

TL;DR

Flexible PLLA/PCL multiblock copolymers were synthesized and blended with PLLA/PDLA to promote stereocomplexation and toughen sc-PLA. The blends achieved full stereocomplexation during melting crystallization and showed greatly improved elongation at break, with only modest tensile-strength loss.

Key findings

  • PLLA/PCL multiblock copolymers were successfully synthesized via UPy quadruple hydrogen bonding; GPC molecular weights were 28.3, 39.8, and 40.4 kg mol⁻¹ for MBC0.9, MBC3.0, and MBC5.0, respectively.
  • Introducing MBC promoted stereocomplexation during melting crystallization: DSC cooling curves showed only stereocomplex crystallization/melting when MBC was present, whereas sc-PLA alone showed stereocomplex crystallization at 125.2 °C and a weaker hc-crystal melting peak at 167.3 °C.
  • Mechanical properties improved markedly: sc-PLA had tensile strength 69.5 MPa and elongation at break 16.4%; at >15% MBC, the blend showed 39.3 MPa and 189% elongation. The authors recommend 10–15% MBC to balance strength and toughness.
  • Thermal stability decreased with MBC: higher MBC contents (10–20 wt%) shifted T5% lower by around 10 °C, and maximum degradation temperature shifted to 270–273 °C; increasing PLLA block length in MBC increased T5% and Td.

Methods

  • PLLA/PCL multiblock copolymers were synthesized from a dihydroxyl-functionalized PCL macroinitiator by ring-opening polymerization of L-lactide to form PLLA-b-PCL-b-PLLA triblocks, followed by coupling with UPy-NCO. Products were characterized by ¹H NMR, GPC, DSC, WAXD, TGA, and POM.
  • sc-PLA/MBC blends were prepared by solution casting from chloroform using equal weights of PLLA and PDLA plus MBC. MBC3.0 contents were 0%, 5%, 10%, 15%, and 20%; blends with different MBCX were tested at 15% MBC.
  • Tensile tests used rectangular specimens of 30 × 3 × 0.1 mm³ at a crosshead speed of 20 mm min⁻¹; each sample was tested six times to calculate average value and deviation.

Limitations

  • The paper does not state explicit limitations.
  • Evident from the text: all sc-PLA/MBC blends were prepared by solution casting, so the results may not directly translate to melt-processed products; the paper notes sc-PLA’s weak melt memory and melt-processing challenges generally.
  • Mechanical characterization is limited to room-temperature tensile tests on solution-cast films; no impact, flexural, or long-term degradation data are reported. The authors also note a trade-off in which increasing MBC lowers tensile strength, recommending only 10–15% MBC.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1039/d2ra00461e

Cites

46 of 46 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 (a) Schematic diagram of the synthesis of PLLA/PCL multiblock copolymer based on PLLA-b-PCL-b-PLLA triblock copolymer; (b) crystallization of sc-PLA/MBC blends.
Fig. 1 (a) Schematic diagram of the synthesis of PLLA/PCL multiblock copolymer based on PLLA-b-PCL-b-PLLA triblock copolymer; (b) crystallization of sc-PLA/MBC blends.CC BY-NC · PubMed Central
Fig. 2 1H NMR spectra (a) and GPC curves (b) of PCL, PLLA-b-PCL-b-PLLA triblock copolymer and PLLA/PCL multiblock copolymer.
Fig. 2 1H NMR spectra (a) and GPC curves (b) of PCL, PLLA-b-PCL-b-PLLA triblock copolymer and PLLA/PCL multiblock copolymer.CC BY-NC · PubMed Central
Fig. 3 (a and b) DSC cooling and reheating curves of PLLA-b-PCL-b-PLLA triblock copolymers (a) and the corresponding PLLA/PCL multiblock copolymers (b); (c) WAXD and (d) TGA curves of PLLA/PCL multiblock copolymers.
Fig. 3 (a and b) DSC cooling and reheating curves of PLLA-b-PCL-b-PLLA triblock copolymers (a) and the corresponding PLLA/PCL multiblock copolymers (b); (c) WAXD and (d) TGA curves of PLLA/PCL multiblock copolymers.CC BY-NC · PubMed Central
Fig. 4 WAXD patterns of sc-PLA and sc-PLA/MBC blends: (a) the blends with various MBC contents; (b) the blends with different MBC.
Fig. 4 WAXD patterns of sc-PLA and sc-PLA/MBC blends: (a) the blends with various MBC contents; (b) the blends with different MBC.CC BY-NC · PubMed Central
Fig. 5 DSC cooling (a and c) and reheating (b and d) of sc-PLA and sc-PLA/MBC blends: (a and b) the blends with various MBC contents; (c and d) the blends with different MBC.
Fig. 5 DSC cooling (a and c) and reheating (b and d) of sc-PLA and sc-PLA/MBC blends: (a and b) the blends with various MBC contents; (c and d) the blends with different MBC.CC BY-NC · PubMed Central
Fig. 6 POM photos of sc-PLA and sc-PLA/MBC blends with various MBC contents during isothermal crystallization of 180 °C.
Fig. 6 POM photos of sc-PLA and sc-PLA/MBC blends with various MBC contents during isothermal crystallization of 180 °C.CC BY-NC · PubMed Central
Fig. 7 POM photos of isothermal crystallization of sc-PLA/MBC-15% blends at various temperatures.
Fig. 7 POM photos of isothermal crystallization of sc-PLA/MBC-15% blends at various temperatures.CC BY-NC · PubMed Central
Fig. 8 TGA curves of sc-PLA and sc-PLA/MBC blends: (a) the blends with various MBC contents; (b) the blends with different MBC.
Fig. 8 TGA curves of sc-PLA and sc-PLA/MBC blends: (a) the blends with various MBC contents; (b) the blends with different MBC.CC BY-NC · PubMed Central
Fig. 9 Tensile stress–strain curves (a and c) of sc-PLA and sc-PLA/MBC blends and the corresponding tensile strength and elongation at break (b and d): (a and b) the blends with various MBC; (c and d) the blends with different MBC.
Fig. 9 Tensile stress–strain curves (a and c) of sc-PLA and sc-PLA/MBC blends and the corresponding tensile strength and elongation at break (b and d): (a and b) the blends with various MBC; (c and d) the blends with different MBC.CC BY-NC · PubMed Central

Verification

Claims the paper makes

1 Valid · 0 Not valid · 17 Not checked · 75 Own results and interpretations

53 more claims

Create a free account to see all 93 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 5
  • It may state two separate claims as one. 30
  • The quote only partly states this claim. 3

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 46 references

Research works printed but not linked: 4

  1. Lv, 2021, Polymer, 222, 123648, 10.1016/j.polymer.2021.123648 · DOI · Paper page
  2. Bao, 2020, Polymer, 190, 122189, 10.1016/j.polymer.2020.122189 · DOI · Paper page
  3. Navarro-Baena, 2014, Polym. Degrad. Stab., 108, 140, 10.1016/j.polymdegradstab.2014.03.012 · DOI · Paper page
  4. Liu, 2014, Polym. Degrad. Stab., 101, 10, 10.1016/j.polymdegradstab.2014.01.023 · DOI · Paper page

Cited by

See all 23

Metadata

Authors
Jing, Z., Huang, X., Liu, X., Liao, M., Zhang, Z., & Li, Y.
Affiliations
Guangdong Ocean University (CN)
Corresponding author
Jing, Zhanxin
Venue
RSC Advances
Published
2022
Volume
12
Issue
21
Pages
13180-13191
ISSN
2046-2069 (ISSN-L)
OpenAlex
W4229050456
Cited by
23
References
46
Citations by year
2026: 5 · 2025: 6 · 2024: 7 · 2023: 4 · 2022: 1
FWCI
1.04
Type
journal article
Language
en
Open access
Locations
  • RSC Advances (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
Funders
  • Natural Science Foundation of Guangdong Province (2018A030307020)
  • Guangdong Ocean University (002029002012)
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
poly(L-lactic acid), polycaprolactone, multiblock copolymers, stereocomplexation, PLA blends, crystallization behavior, crystal structure, thermal stability, mechanical properties, toughness, nucleation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Crystallization, thermal and mechanical properties of stereocomplexed poly(lactide) with flexible PLLA/PCL multiblock copolymer. https://app.cochat.ai/papers/10.1039/d2ra00461e
The paper
Jing, Z., Huang, X., Liu, X., Liao, M., Zhang, Z., & Li, Y. (2022). Crystallization, thermal and mechanical properties of stereocomplexed poly(lactide) with flexible PLLA/PCL multiblock copolymer. RSC Advances. https://doi.org/10.1039/d2ra00461e

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.