The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Multiphase induction motor drives – a technology status review
Open accessAbstract
The area of multiphase variable-speed motor drives in general and multiphase induction motor drives in particular has experienced a substantial growth since the beginning of this century. Research has been conducted worldwide and numerous interesting developments have been reported in the literature. An attempt is made to provide a detailed overview of the current state-of-the-art in this area. The elaborated aspects include advantages of multiphase induction machines, modelling of multiphase induction machines, basic vector control and direct torque control schemes and PWM control of multiphase voltage source inverters. The authors also provide a detailed survey of the control strategies for five-phase and asymmetrical six-phase induction motor drives, as well as an overview of the approaches to the design of fault tolerant strategies for post-fault drive operation, and a discussion of multiphase multi-motor drives with single inverter supply. Experimental results, collected from various multiphase induction motor drive laboratory rigs, are also included to facilitate the understanding of the drive operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Space vector PWM control of dual three-phase induction machine using vector space decomposition
Zhao, Y., & Lipo, T. A. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464525 · Cited by 1,311
Five-Phase Permanent-Magnet Motor Drives
Parsa, L., & Toliyat, H. A. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.841021 · Cited by 462
Self-citationFault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376
Disturbance-free operation of a multiphase current-regulated motor drive with an opened phase
Fu, J.-R., & Lipo, T. A. (1994) · IEEE Transactions on Industry Applications · doi:10.1109/28.315238 · Cited by 372
Improved Reliability in Solid-State AC Drives by Means of Multiple Independent Phase Drive Units
Jahns, T. M. (1980) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1980.4503793 · Cited by 358
Disturbance free operation of a multiphase current regulated motor drive with an opened phase
Fu, J.-R., & Lipo, T. A. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.298884 · Cited by 318
Torque density improvement in a six-phase induction motor with third harmonic current injection
Lyra, R. O. C., & Lipo, T. A. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.802938 · Cited by 310
Levi, E., Jones, M., Vukosavic, S. N., & Toliyat, H. A. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.823241 · Cited by 274
Self-citationDesign and Testing of a Four-Phase Fault-Tolerant Permanent-Magnet Machine for an Engine Fuel Pump
Mecrow, B. C., Jack, A. G., Atkinson, D. J., Green, S. R., Atkinson, G. J., King, A., & Green, B. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.832074 · Cited by 252
Modeling and control of a multi-phase induction machine with structural unbalance
Zhao, Y., & Lipo, T. A. (1996) · IEEE Transactions on Energy Conversion · doi:10.1109/60.537028 · Cited by 216
Modeling and control of a multi-phase induction machine with structural unbalance
Zhao, Y., & Lipo, T. A. (1996) · IEEE Transactions on Energy Conversion · doi:10.1109/60.537009 · Cited by 198
A dual-bridge inverter approach to eliminating common-mode voltages and bearing and leakage currents
von Jauanne, A., & Zhang, H. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.737591 · Cited by 174
Optimal torque control of fault-tolerant permanent magnet brushless machines
Wang, J., Atallah, K., & Howe, D. (2003) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2003.816707 · Cited by 162
Toliyat, H. A., Waikar, S. P., & Lipo, T. A. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.663476 · Cited by 141
Self-citationGeneric control method of multileg voltage-source-converters for fast practical implementation
Delarue, P., Bouscayrol, A., & Semail, E. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809349 · Cited by 130
Vectorial formalism for analysis and design of polyphase synchronous machines
Semail, E., Bouscayrol, A., & Hautier, J. P. (2003) · The European Physical Journal Applied Physics · doi:10.1051/epjap:2003034 · Cited by 92
Favourable slot and pole number combinations for fault-tolerant PM machines
Mitcham, A. J., Antonopoulos, G., & Cullen, J. J. A. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040584 · Cited by 87
Abolhassani, M. T. (2005) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2005.195803 · Cited by 56
Vector control schemes for series-connected six-phase two-motor drive systems
LEVI, E., Vukosavić, S. N., & Jones, M. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20055018 · Cited by 54
Self-citationThe design of fault tolerant machines for aerospace applications
Atkinson, G. J., Mecrow, B. C., Jack, A. G., Atkinson, D. J., Sangha, P., & Benarous, M. (2005) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2005.195974 · Cited by 50
A New Transformerless Topology for AC-Fed Traction Vehicles Using Multi-Star Induction Motors
Steiner, M., Deplazes, R., & Stemmler, H. (2000) · EPE Journal · doi:10.1080/09398368.2000.11463469 · Cited by 49
Štumberger, B., Štumberger, G., Hamler, A., Trlep, M., Jesenik, M., & Goričan, V. (2003) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2003.816251 · Cited by 21
Štumberger, B., Hamler, A., Trlep, M., Jesenik, M., & Goričan, V. (2003) · Springer eBooks · doi:10.1007/978-94-017-2494-4_32 · Cited by 12
Cited by
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2447733 · Cited by 927
Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669
Levi, E. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2434999 · Cited by 661
Self-citationRecent Advances in the Design, Modeling, and Control of Multiphase Machines—Part II
Duran, M. J., & Barrero, F. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2448211 · Cited by 658
A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives
Munim, W. N. W. A., Duran, M. J., Che, H. S., Bermudez, M., Gonzalez-Prieto, I., & Rahim, N. A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2632118 · Cited by 292
Metadata
- Authors
- Levi, E., Bojoi, R., Profumo, F., Toliyat, H. A., & Williamson, S.
- Venue
- IET Electric Power Applications
- Published
- 2007-07
- Volume
- 1
- Issue
- 4
- Pages
- 489-516
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W1990311797
- Cited by
- 1,619
- References
- 23
- FWCI
- 39.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.