The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Open accessAbstract
The major consideration in dc–dc conversion is often associated with high efficiency, reduced stresses involving semiconductors, low cost, simplicity and robustness of the involved topologies. In the last few years, high‐step‐up non‐isolated dc–dc converters have become quite popular because of its wide applicability, especially considering that dc–ac converters must be typically supplied with high dc voltages. The conventional non‐isolated boost converter is the most popular topology for this purpose, although the conversion efficiency is limited at high duty cycle values. In order to overcome such limitation and improve the conversion ratio, derived topologies can be found in numerous publications as possible solutions for the aforementioned applications. Within this context, this work intends to classify and review some of the most important non‐isolated boost‐based dc–dc converters. While many structures exist, they can be basically classified as converters with and without wide conversion ratio. Some of the main advantages and drawbacks regarding the existing approaches are also discussed. Finally, a proper comparison is established among the most significant converters regarding the voltage stress across the semiconductor elements, number of components and static gain.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
High-efficiency, high step-up DC-DC converters
Zhao, Q., & Lee, F. C. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.807188 · Cited by 1,015
Voltage Multiplier Cells Applied to Non-Isolated DC–DC Converters
Prudente, M., Pfitscher, L. L., Emmendoerfer, G., Romaneli, E. F., & Gules, R. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915762 · Cited by 750
Switching converters with wide DC conversion range
Maksimovic, D., & Cuk, S. (1991) · IEEE Transactions on Power Electronics · doi:10.1109/63.65013 · Cited by 637
Impedance specifications for stable DC distributed power systems
Feng, X., Liu, J., & Lee, F. C. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/63.988825 · Cited by 582
A DC–DC multilevel boost converter
Rosas-Caro, J. C., Ramirez, J. M., Peng, F. Z., & Valderrabano, A. (2010) · IET Power Electronics · doi:10.1049/iet-pel.2008.0253 · Cited by 522
Steady-state analysis of an interleaved boost converter with coupled inductors
Lee, P.-W., Lee, Y.-S., Cheng, D. K. W., & Liu, X.-C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.857959 · Cited by 498
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
High Step-Up DC–DC Converter With Active Switched-Inductor and Passive Switched-Capacitor Networks
Salvador, M. A., Lazzarin, T. B., & Coelho, R. F. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782239 · Cited by 438
Chakraborty, S., Vu, H.-N., Hasan, M. M., Tran, D.-D., Baghdadi, M. E., & Hegazy, O. (2019) · Energies · doi:10.3390/en12081569 · Cited by 384
Nonisolated High Gain DC–DC Converter for DC Microgrids
Lakshmi, M., & Hemamalini, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733463 · Cited by 341
Wang, P., Zhou, L., Zhang, Y., Li, J., & Sumner, M. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2688324 · Cited by 201
Metadata
- Authors
- Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S.
- Venue
- IET Power Electronics
- Published
- 2015-10
- Volume
- 8
- Issue
- 10
- Pages
- 2044-2057
- ISSN
- 1755-4535 (ISSN-L)
- 1755-4543
- OpenAlex
- W2267214452
- Cited by
- 591
- References
- 38
- FWCI
- 20.53
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.