Importance of the Propulsive Phase in Strength Assessment
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
This study analyzed the contribution of the propulsive and braking phases among different percentages of the one-repetition maximum (1RM) in the concentric bench press exercise. One hundred strength-trained men performed a test with increasing loads up to the 1RM for the individual determination of the load-power relationship. The relative load that maximized the mechanical power output (P(max)) was determined using three different parameters: mean concentric power (MP), mean power of the propulsive phase (MPP) and peak power (PP). The load at which the braking phase no longer existed was 76.1+/-7.4% 1RM. P(max) was dependent on the parameter used: MP (54.2%), MPP (36.5%) or PP (37.4%). No significant differences were found for loads between 40-65% 1RM (MP) or 20-55% 1RM (MPP and PP), nor between P(max) (% 1RM) when using MPP or PP. P(max) was independent of relative strength, although certain tendency towards slightly lower loads was detected for the strongest subjects. These results highlight the importance of considering the contribution of the propulsive and braking phases in isoinertial strength and power assessments. Referring the mean mechanical values to the propulsive phase avoids underestimating an individual's true neuromuscular potential when lifting light and medium loads.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Several researchers have highlighted strong relationships between load and movement velocity, with the assessment of strength qualities being load-velocity specific [15, 16].”
From Comparison of weightlifting, traditional resistance training and plyometrics on strength, power and speed: a systematic review with meta-analysis. (2022) · cites this paper as [15]
Citations
Cites
Newton, R. U., Murphy, A. J., Humphries, B. J., Wilson, G. J., Kraemer, W. J., & H�kkinen, K. (1997) · European Journal of Applied Physiology · doi:10.1007/s004210050169 · Cited by 377
Optimal Loading for Maximal Power Output during Lower-Body Resistance Exercises
CORMIE, P., MCCAULLEY, G. O., TRIPLETT, N. T., & MCBRIDE, J. M. (2007) · Medicine & Science in Sports & Exercise · doi:10.1249/01.mss.0000246993.71599.bf · Cited by 361
Kinematics, Kinetics, and Muscle Activation during Explosive Upper Body Movements
Newton, R. U., Kraemer, W. J., Häkkinen, K., Humphries, B. J., & Murphy, A. J. (1996) · Journal of Applied Biomechanics · doi:10.1123/jab.12.1.31 · Cited by 359
Cronin, J., & Sleivert, G. (2005) · Sports Medicine · doi:10.2165/00007256-200535030-00003 · Cited by 353
Izquierdo, Ibañez, Gorostiaga, Garrues, Zúñiga, Antón, Larrión, & Häkkinen (1999) · Acta Physiologica Scandinavica · doi:10.1046/j.1365-201x.1999.00590.x · Cited by 342
Possible Stimuli for Strength and Power Adaptation: Acute Mechanical Responses
Crewther, B., Cronin, J., & Keogh, J. (2005) · Sports Medicine · doi:10.2165/00007256-200535110-00004 · Cited by 336
Izquierdo, M., Häkkinen, K., Gonzalez-Badillo, J., Ibáñez, J., & Gorostiaga, E. (2002) · European Journal of Applied Physiology · doi:10.1007/s00421-002-0628-y · Cited by 317
BAKER, D., NANCE, S., & MOORE, M. (2001) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200102000-00016 · Cited by 268
A biomechanical analysis of the sticking region in the bench press
ELLIOTT, B. C., WILSON, G. J., & KERR, G. K. (1989) · Medicine & Science in Sports & Exercise · doi:10.1249/00005768-198908000-00018 · Cited by 264
Maximum Strength-Power-Performance Relationships in Collegiate Throwers
STONE, M. H., SANBORN, K., OʼBRYANT, H. S., HARTMAN, M., STONE, M. E., PROULX, C., WARD, B., & HRUBY, J. (2003) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200311000-00019 · Cited by 254
Baker, D., Wilson, G., & Carlyon, B. (1994) · European Journal of Applied Physiology and Occupational Physiology · doi:10.1007/bf00571456 · Cited by 237
Kaneko, M. (1983) · Medical Entomology and Zoology · Cited by 227
Marques, M. C., van den Tillaar, R., Vescovi, J. D., & González-Badillo, J. J. (2007) · International Journal of Sports Physiology and Performance · doi:10.1123/ijspp.2.4.414 · Cited by 195
BAKER, D. (2001) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200102000-00006 · Cited by 192
BAKER, D., NANCE, S., & MOORE, M. (2001) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200102000-00004 · Cited by 176
Developing explosive power: A comparison of technique and training
CRONIN, J. W., McNair, P. J., & Marshall, B. (2001) · Journal of science and medicine in sport · doi:10.1016/s1440-2440(01)80008-6 · Cited by 127
Human Muscle Power Output During Upper-and Lower-Body Exercises
SIEGEL, J. A., GILDERS, R. M., STARON, R. S., & HAGERMAN, F. C. (2002) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200205000-00002 · Cited by 110
The role of maximal strength and load on initial power production
CRONIN, J. B., McNAIR, P. J., & MARSHALL, R. N. (2000) · Medicine & Science in Sports & Exercise · doi:10.1097/00005768-200010000-00016 · Cited by 105
Use of the iso-inertial force mass relationship in the prediction of dynamic human performance
Murphy, A. J., Wilson, G. J., & Pryor, J. F. (1994) · European Journal of Applied Physiology · doi:10.1007/bf01094797 · Cited by 92
THE INFLUENCE OF BODY MASS ON CALCULATION OF POWER DURING LOWER-BODY RESISTANCE EXERCISES
Cormie, P., McBride, J. M., & McCaulley, G. O. (2007) · The Journal of Strength and Conditioning Research · doi:10.1519/r-21636.1 · Cited by 84
Morphological basis of skeletal muscle power output
Edgerton, V. R. (1986) · Medical Entomology and Zoology · Cited by 46
DAWSON, B., VLADICH, T., & BLANKSBY, B. A. (2002) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200211000-00001 · Cited by 41
The concept of iso-inertial assessment: Reproducibility analysis and descriptive data
Jidovtseff, B., Croisier, J., Lhermerout, C., Serre, L., Sac, D., & Crielaard, J. M. (2006) · Isokinetics and Exercise Science · doi:10.3233/ies-2006-0221 · Cited by 32
The assessment of human dynamic muscular function: a comparison of isoinertial and isokinetic tests.
Murphy, A. J., & Wilson, G. J. (1996) · PubMed · Cited by 32
The ability of isoinertial assessment to monitor specific training effects.
Jidovtseff, B., Croisier, J. L., Scimar, N., Demoulin, C., Maquet, D., & Crielaard, J. M. (2008) · PubMed · Cited by 31
Is There a Physiologic Basis for Creatine Use in Children and Adolescents?
UNNITHAN, V. B., VEEHOF, S. H. E., VELLA, C. A., & KERN, M. (2001) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200111000-00021 · Cited by 18
Cited by
Velocity Loss as an Indicator of Neuromuscular Fatigue during Resistance Training
SÁNCHEZ-MEDINA, L., & GONZÁLEZ-BADILLO, J. J. (2011) · Medicine & Science in Sports & Exercise · doi:10.1249/mss.0b013e318213f880 · Cited by 852
Pareja‐Blanco, F., Rodríguez‐Rosell, D., Sánchez‐Medina, L., Sanchis‐Moysi, J., Dorado, C., Mora‐Custodio, R., Yáñez‐García, J. M., Morales‐Alamo, D., Pérez‐Suárez, I., Calbet, J. A. L., et al. (2017) · Scandinavian Journal of Medicine & Science in Sports · doi:10.1111/sms.12678 · Cited by 505
Velocity-Based Training: From Theory to Application
Weakley, J., Mann, B., Banyard, H., McLaren, S., Scott, T., & Garcia-Ramos, A. (2021) · Strength & Conditioning Journal · doi:10.1519/ssc.0000000000000560 · Cited by 460
“81 m$s(22)]) has also been proposed as an alternative (77).”
BackgroundReliability and Validity of the Load–Velocity Relationship to Predict the 1RM Back Squat
Banyard, H. G., Nosaka, K., & Haff, G. G. (2017) · Journal of Strength and Conditioning Research · doi:10.1519/jsc.0000000000001657 · Cited by 301
“Instead, they suggest using mean propulsive velocity, which measures the average velocity during the concentric phase of a lift when acceleration of the barbell is greater than the acceleration because of gravity (propulsive phase) (28).”
InfluentialPérez-Castilla, A., Piepoli, A., Delgado-García, G., Garrido-Blanca, G., & García-Ramos, A. (2019) · Journal of Strength and Conditioning Research · doi:10.1519/jsc.0000000000003118 · Cited by 288
“, maximum instantaneous velocity value reached during the concentric phase) have been commonly recommended for training and testing (9,35).”
Metadata
- Authors
- Sanchez-Medina, L., Perez, C. E., & Gonzalez-Badillo, J. J.
- Affiliations
- Universidad de Murcia (ES)
- Venue
- International Journal of Sports Medicine
- Publisher
- Georg Thieme Verlag KG
- Published
- 2009-12-17
- Volume
- 31
- Issue
- 02
- Pages
- 123-129
- ISSN
- 0172-4622 (ISSN-L)
- 1439-3964
- OpenAlex
- W2091317809
- Cited by
- 454
- References
- 24
- Citations by year
- 2026: 26 · 2025: 28 · 2024: 37 · 2023: 38 · 2022: 45 · 2021: 30 · 2020: 46 · 2019: 40 · 2018: 31 · 2017: 35 · 2016: 27 · 2015: 22 · 2014: 20 · 2013: 6 · 2012: 10
- FWCI
- 8.09
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Sports Medicine (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Sports Performance and Training
- Physical Sciences › Engineering › Biomedical Engineering › Sports Dynamics and Biomechanics
- Health Sciences › Medicine › Physiology (medical) › Cardiovascular and exercise physiology
- Keywords
- propulsion phase, braking phase, mechanical power output, one-repetition maximum, bench press, peak power, strength analysis
- MeSH terms
- Adult, Humans, Male, Weight Lifting, Body Mass Index, Muscle, Skeletal, Muscle Strength, Resistance Training, Young Adult
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.