The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Reliability and Validity of the Load–Velocity Relationship to Predict the 1RM Back Squat
Open accessAbstract
Banyard, HG, Nosaka, K, and Haff, GG. Reliability and validity of the load–velocity relationship to predict the 1RM back squat. J Strength Cond Res 31(7): 1897–1904, 2017—This study investigated the reliability and validity of the load–velocity relationship to predict the free-weight back squat one repetition maximum (1RM). Seventeen strength-trained males performed three 1RM assessments on 3 separate days. All repetitions were performed to full depth with maximal concentric effort. Predicted 1RMs were calculated by entering the mean concentric velocity of the 1RM (V 1RM) into an individualized linear regression equation, which was derived from the load–velocity relationship of 3 (20, 40, 60% of 1RM), 4 (20, 40, 60, 80% of 1RM), or 5 (20, 40, 60, 80, 90% of 1RM) incremental warm-up sets. The actual 1RM (140.3 ± 27.2 kg) was very stable between 3 trials (ICC = 0.99; SEM = 2.9 kg; CV = 2.1%; ES = 0.11). Predicted 1RM from 5 warm-up sets up to and including 90% of 1RM was the most reliable (ICC = 0.92; SEM = 8.6 kg; CV = 5.7%; ES = −0.02) and valid (r = 0.93; SEE = 10.6 kg; CV = 7.4%; ES = 0.71) of the predicted 1RM methods. However, all predicted 1RMs were significantly different (p ≤ 0.05; ES = 0.71–1.04) from the actual 1RM. Individual variation for the actual 1RM was small between trials ranging from −5.6 to 4.8% compared with the most accurate predictive method up to 90% of 1RM, which was more variable (−5.5 to 27.8%). Importantly, the V 1RM (0.24 ± 0.06 m·s−1) was unreliable between trials (ICC = 0.42; SEM = 0.05 m·s−1; CV = 22.5%; ES = 0.14). The load–velocity relationship for the full depth free-weight back squat showed moderate reliability and validity but could not accurately predict 1RM, which was stable between trials. Thus, the load–velocity relationship 1RM prediction method used in this study cannot accurately modify sessional training loads because of large V 1RM variability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strength testing—predicting a one-rep max from reps-to-fatigue
Brzycki, M. (1993) · Journal of Physical Education, Recreation & Dance · doi:10.1080/07303084.1993.10606684 · Cited by 1,236
Velocity Loss as an Indicator of Neuromuscular Fatigue during Resistance Training
SÁNCHEZ-MEDINA, L., & GONZÁLEZ-BADILLO, J. J. (2011) · Medicine & Science in Sports & Exercise · doi:10.1249/mss.0b013e318213f880 · Cited by 852
Why is countermovement jump height greater than squat jump height?
BOBBERT, M. F., GERRITSEN, K. G. M., LITJENS, M. C. A., & VAN SOEST, A. J. (1996) · Medicine & Science in Sports & Exercise · doi:10.1097/00005768-199611000-00009 · Cited by 812
Movement Velocity as a Measure of Loading Intensity in Resistance Training
González-Badillo, J. J., & Sánchez-Medina, L. (2010) · International Journal of Sports Medicine · doi:10.1055/s-0030-1248333 · Cited by 788 · cited 2×
“However, even though mean propulsive velocity has been shown to be a key variable in many studies (8,11,27,28), it is also noted that it may add an unnecessary level of complexity to velocity measurements for strength and conditioning practitioners (27).”
Importance of the Propulsive Phase in Strength Assessment
Sanchez-Medina, L., Perez, C. E., & Gonzalez-Badillo, J. J. (2010) · International Journal of Sports Medicine · doi:10.1055/s-0029-1242815 · Cited by 454
REYNOLDS, J. M., GORDON, T. J., & ROBERGS, R. A. (2006) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-200608000-00020 · Cited by 365
Izquierdo, M., Ibañez, J., González-Badillo, J. J., Häkkinen, K., Ratamess, N. A., Kraemer, W. J., French, D. N., Eslava, J., Altadill, A., Asiain, X., et al. (2006) · Journal of Applied Physiology · doi:10.1152/japplphysiol.01400.2005 · Cited by 316
The specificity of training prescription and physiological assessment: A review
Reilly, T., Morris, T., & Whyte, G. (2009) · Journal of Sports Sciences · doi:10.1080/02640410902729741 · Cited by 283
LeSuer, D. A., McCormick, J. H., Mayhew, J. L., Wasserstein, R. L., & Arnold, M. D. (1997) · Journal of Strength and Conditioning Research · doi:10.1519/00124278-199711000-00001 · Cited by 272
Using the load-velocity relationship for 1RM prediction
Jidovtseff, B., Harris, N. K., Crielaard, J.-M., & Cronin, J. B. (2011) · Journal of Strength and Conditioning Research · doi:10.1519/jsc.0b013e3181b62c5f · Cited by 255
Cited by
Velocity-Based Training: From Theory to Application
Weakley, J., Mann, B., Banyard, H., McLaren, S., Scott, T., & Garcia-Ramos, A. (2021) · Strength & Conditioning Journal · doi:10.1519/ssc.0000000000000560 · Cited by 460
Self-citationJukic, I., Van Hooren, B., Ramos, A. G., Helms, E. R., McGuigan, M. R., & Tufano, J. J. (2021) · Sports Medicine · doi:10.1007/s40279-020-01423-4 · Cited by 85
Romero-Moraleda, B., Del Coso, J., Gutiérrez-Hellín, J., & Lara, B. (2019) · Nutrients · doi:10.3390/nu11112662 · Cited by 44
Metadata
- Authors
- Banyard, H. G., Nosaka, K., & Haff, G. G.
- Venue
- Journal of Strength and Conditioning Research
- Published
- 2017-07
- Volume
- 31
- Issue
- 7
- Pages
- 1897-1904
- ISSN
- 1064-8011 (ISSN-L)
- OpenAlex
- W2523190355
- Cited by
- 301
- References
- 25
- FWCI
- 21.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reliability and Validity of the Load–Velocity Relationship to Predict the 1RM Back Squat. https://app.cochat.ai/papers/10.1519/jsc.0000000000001657
- The paper
- Banyard, H. G., Nosaka, K., & Haff, G. G. (2017). Reliability and Validity of the Load–Velocity Relationship to Predict the 1RM Back Squat. Journal of Strength and Conditioning Research. https://doi.org/10.1519/jsc.0000000000001657
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.