Influence of Mineral Composition on Sintering Lunar Regolith
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The authors investigate mechanical properties of sintered lunar regolith. Using JSC-1A and DNA lunar simulants, they study the influence of changes in glass content, main plagioclase series, and ilmenite content on a defined sintering process and on the mechanical properties of resulting sintered samples. Ilmenite addition up to 20 wt% of the regolith showed a negligible effect on the sintered product. The anorthite plagioclase endmember cannot be replaced by albite, responsible for the low sintering temperature of DNA and covering up the effect of the glass phase. The vacuum environment was revealed to have a positive effect on JSC-1A sintering: the grains bond at lower temperature than in air, thus preventing the formation of additional porosity and increasing the compression strength up to 152 MPa compared with only 98 MPa for sintering JSC-1A in air.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
First demonstration on direct laser fabrication of lunar regolith parts
Krishna Balla, V., Roberson, L. B., O'Connor, G. W., Trigwell, S., Bose, S., & Bandyopadhyay, A. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211271992 · Cited by 186
Hill, E., Mellin, M. J., Deane, B., Liu, Y., & Taylor, L. A. (2007) · Journal of Geophysical Research: Planets · doi:10.1029/2006je002767 · Cited by 128
Moon: Prospective Energy and Material Resources
(2012) · doi:10.1007/978-3-642-27969-0 · Cited by 90
Compressive deformation of porous lunar regolith
Gualtieri, T., & Bandyopadhyay, A. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.11.153 · Cited by 73
Lunar Surface Stabilization via Sintering or the Use of Heat Cured Polymers
Hintze, P., Curran, J., & Back, T. (2009) · 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition · doi:10.2514/6.2009-1015 · Cited by 69
Cited by
Solar 3D printing of lunar regolith
Meurisse, A., Makaya, A., Willsch, C., & Sperl, M. (2018) · Acta Astronautica · doi:10.1016/j.actaastro.2018.06.063 · Cited by 287
Self-citationFarries, K. W., Visintin, P., Smith, S. T., & van Eyk, P. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123627 · Cited by 169
Solar sintering for lunar additive manufacturing
Fateri, M., Meurisse, A., Sperl, M., Urbina, D., Madakashira, H. K., Govindaraj, S., Gancet, J., Imhof, B., Hoheneder, W., Waclavicek, R., et al. (2019) · Journal of Aerospace Engineering · doi:10.1061/(asce)as.1943-5525.0001093 · Cited by 135
Self-citationVacuum sintered lunar regolith simulant: Pore-forming and thermal conductivity
Song, L., Xu, J., Fan, S., Tang, H., Li, X., Liu, J., & Duan, X. (2019) · Ceramics International · doi:10.1016/j.ceramint.2018.11.023 · Cited by 116
Kim, Y.-J., Ryu, B. H., Jin, H., Lee, J., & Shin, H.-S. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.06.098 · Cited by 91
Metadata
- Authors
- Meurisse, A., Beltzung, J. C., Kolbe, M., Cowley, A., & Sperl, M.
- Venue
- Journal of Aerospace Engineering
- Published
- 2017-07
- Volume
- 30
- Issue
- 4
- ISSN
- 0893-1321 (ISSN-L)
- 1943-5525
- OpenAlex
- W2586114546
- Cited by
- 131
- References
- 6
- FWCI
- 3.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of Mineral Composition on Sintering Lunar Regolith. https://app.cochat.ai/papers/10.1061/(asce)as.1943-5525.0000721
- The paper
- Meurisse, A., Beltzung, J. C., Kolbe, M., Cowley, A., & Sperl, M. (2017). Influence of Mineral Composition on Sintering Lunar Regolith. Journal of Aerospace Engineering. https://doi.org/10.1061/(asce)as.1943-5525.0000721
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.