Solar Sintering for Lunar Additive Manufacturing
The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
Additive manufacturing (AM) is one of the most promising techniques for on-site manufacturing on extraterrestrial bodies. In this investigation, layerwise solar sintering under ambient and vacuum conditions targeting lunar exploration and a moon base was studied. A solar simulator was used in order to enable AM of interlockable building elements out of JSC-2A lunar regolith simulant. Solar additively manufactured samples were characterized mechanically regarding their compressive and bending properties. Moreover, samples were analyzed morphologically using X-ray tomography and scanning electron microscopy (SEM) followed by density measurements. AM for identical process parameters led to final products with different physical and chemical characteristics when performed under ambient and vacuum conditions. Hence, process parameters were optimized under each individual working atmosphere. The experimental data were further integrated into finite-element (FE) calculations. This led to the refinement of the design of interlocking building elements for lunar applications. These blocks have the potential to form structures for shielding a pressurized inflatable habitat from radiation and micrometeorite impacts or creating nonpressurized shelters for robotic machinery.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Solar sintered materials under ambient atmosphere were characterized by compressive strength of 2 . 49 MPa and Young's modulus of 0 . 21 GPa .”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [135]
In the citing paper
“Meurisse et al. [156] and Fateri et al. [135], in their collaborative works, demonstrated the feasibility of printing basic geometries through selective solar sintering of Lunar regolith using mirror-based solar collectors.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [135]
In the citing paper
“Microwave heating is currently recognized as a more practical approach for constructing structures and extracting resources on the Moon compared to solar [135,156] and laser sintering [125] methodologies.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [135]
In the citing paper
“Typical techniques suitable for regolith sintering include microwave sintering, solar sintering, spark plasma sintering, and selective laser sintering. 57-60”
From Energy system and resource utilization in space: A state-of-the-art review (2024) · cites this paper as [58]
In the citing paper
“Two important differences in the characteristics between the real lunar regolith and simulants are that, the real ones are abundant in nanophase Fe 0 and glass phase. 58”
From Energy system and resource utilization in space: A state-of-the-art review (2024) · cites this paper as [58]
Citations
Cites
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Solar 3D printing of lunar regolith
Meurisse, A., Makaya, A., Willsch, C., & Sperl, M. (2018) · Acta Astronautica · doi:10.1016/j.actaastro.2018.06.063 · Cited by 287
Self-citationFirst demonstration on direct laser fabrication of lunar regolith parts
Krishna Balla, V., Roberson, L. B., O'Connor, G. W., Trigwell, S., Bose, S., & Bandyopadhyay, A. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211271992 · Cited by 186
The production of oxygen and metal from lunar regolith
Schwandt, C., Hamilton, J. A., Fray, D. J., & Crawford, I. A. (2012) · Planetary and Space Science · doi:10.1016/j.pss.2012.06.011 · Cited by 186
Evaluations of lunar regolith simulants
Taylor, L. A., Pieters, C. M., & Britt, D. (2016) · Planetary and Space Science · doi:10.1016/j.pss.2016.04.005 · Cited by 183
Fateri, M., & Gebhardt, A. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12326 · Cited by 152
Self-citationGoulas, A., Binner, J. G. P., Harris, R. A., & Friel, R. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2016.11.004 · Cited by 138
Influence of Mineral Composition on Sintering Lunar Regolith
Meurisse, A., Beltzung, J. C., Kolbe, M., Cowley, A., & Sperl, M. (2017) · Journal of Aerospace Engineering · doi:10.1061/(asce)as.1943-5525.0000721 · Cited by 131
Self-citationVacuum sintered lunar regolith simulant: Pore-forming and thermal conductivity
Song, L., Xu, J., Fan, S., Tang, H., Li, X., Liu, J., & Duan, X. (2019) · Ceramics International · doi:10.1016/j.ceramint.2018.11.023 · Cited by 116
2018 Global Exploration Roadmap
Mahoney, E. (2018) · Cited by 113
Research works printed but not linked: 1
- Gustafson M. and C. Owens. 2006. “Characterization summary of JSC-1AF lunar mare regolith simulant.” In Proc. NIST Particle Workshop. Washington DC: National Aeronautics and Space Administration.
Cited by
Isachenkov, M., Chugunov, S., Akhatov, I., & Shishkovsky, I. (2021) · Acta Astronautica · doi:10.1016/j.actaastro.2021.01.005 · Cited by 199
Overview of the Lunar In Situ Resource Utilization Techniques for Future Lunar Missions
Zhang, P., Dai, W., Niu, R., Zhang, G. C., Liu, G., Liu, X., Zheng, B. R., Wang, Z., Zheng, H., Liu, C., et al. (2023) · Space Science & Technology · doi:10.34133/space.0037 · Cited by 190
Farries, K. W., Visintin, P., Smith, S. T., & van Eyk, P. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123627 · Cited by 169
Challenges in the Technology Development for Additive Manufacturing in Space
Zocca, A., Wilbig, J., Waske, A., Günster, J., Widjaja, M. P., Neumann, C., Clozel, M., Meyer, A., Ding, J., Zhou, Z., et al. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100018 · Cited by 123
Karl, D., Cannon, K. M., & Gurlo, A. (2021) · Open Ceramics · doi:10.1016/j.oceram.2021.100216 · Cited by 94
Metadata
- Authors
- Fateri, M., Meurisse, A., Sperl, M., Urbina, D., Madakashira, H. K., Govindaraj, S., Gancet, J., Imhof, B., Hoheneder, W., Waclavicek, R., Preisinger, C., Podreka, E., Mohamed, M. P., & Weiss, P.
- Affiliations
- Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) (DE)
- Space Applications Services (Belgium) (BE)
- Division Manager, Technologies, Applications and Research, Space Applications Services, Leuvensesteenweg 325, Zaventem, Brussel 1932, Belgium.
- Liquifer Systems Group (Austria) (AT)
- Senior Engineer, Bollinger und Grohmann GmbH, Franz-Josefs-Kai 31/1/4, Frankfurt am Main 60327, Germany.
- Senior Engineer, Bollinger und Grohmann GmbH, Franz-Josefs-Kai 31/1/44, Frankfurt am Main 60327, Germany.
- Compagnie Maritime d'Expertises (France) (FR)
- Corresponding author
- Fateri, Miranda
- Venue
- Journal of Aerospace Engineering
- Published
- 2019-11
- Volume
- 32
- Issue
- 6
- ISSN
- 0893-1321 (ISSN-L)
- 1943-5525
- OpenAlex
- W2972456804
- Cited by
- 135
- References
- 19
- Citations by year
- 2026: 18 · 2025: 34 · 2024: 32 · 2023: 15 · 2022: 17 · 2021: 14 · 2020: 5
- FWCI
- 4.10
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Aerospace Engineering (publishedVersion)
- elib (German Aerospace Center) (submittedVersion)
- OPUS (Aalen University) (submittedVersion)
- Funders
- National Aeronautics and Space Administration
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Keywords
- lunar regolith simulant, lunar base construction, vacuum processing, compressive strength, flexural properties, X-ray tomography, finite element analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solar Sintering for Lunar Additive Manufacturing. https://app.cochat.ai/papers/10.1061/(asce)as.1943-5525.0001093
- The paper
- Fateri, M., Meurisse, A., Sperl, M., Urbina, D., Madakashira, H. K., Govindaraj, S., Gancet, J., Imhof, B., Hoheneder, W., Waclavicek, R., Preisinger, C., Podreka, E., Mohamed, M. P., & Weiss, P. (2019). Solar Sintering for Lunar Additive Manufacturing. Journal of Aerospace Engineering. https://doi.org/10.1061/(asce)as.1943-5525.0001093
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.