The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Use of Tangible and Augmented Reality Models in Engineering Graphics Courses
Abstract
Engineering graphics courses are typically a requirement for engineering students around the world. Besides understanding and depicting graphic representation of engineering objects, the goal of these courses is to provide students with an understanding of the relationship between three-dimensional (3D) objects and their projections. However, in the classroom, where time is limited, it is very difficult to explain 3D geometry using only drawings on paper or at the blackboard. The research presented herein aims to develop two teaching aids; a tangible model and an augmented reality (AR) model, to help students better understand the relationship between 3D objects and their projections. Tangible models refer to the physical objects which are comprised of a set of differently shaped pieces. The tangible model we developed includes eight wooden blocks that include all the main geometrical features with respect to their 3D projections. The AR models are the virtual models which can superimpose 3D graphics of typical geometries on real-time video and dynamically vary view perspective in real-time to be seen as real objects. The AR model was developed using the ARToolKitPlus library and includes all the geometrical features generally taught in engineering graphics courses or technical drawing courses. To verify the effectiveness and applicability of the models we developed, we conducted a user test on 35 engineering-major students. The statistical results indicated that the tangible model significantly increased the learning performance of students in their abilities to transfer 3D objects onto two-dimensional (2D) projections. Students also demonstrated higher engagement with the AR model during the learning process. Compared to using the screen-based orthogonal and pictorial images, the tangible model and augmented reality model were evaluated to be more effective teaching aids for engineering graphics courses.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Azuma, R. T. (1997) · Presence: Teleoperators and Virtual Environments · doi:10.1162/pres.1997.6.4.355 · Cited by 10,121
Cited by
Current status, opportunities and challenges of augmented reality in education
Wu, H.-K., Lee, S. W.-Y., Chang, H.-Y., & Liang, J.-C. (2013) · Computers & Education · doi:10.1016/j.compedu.2012.10.024 · Cited by 2,674
A Critical Review of the Use of Virtual Reality in Construction Engineering Education and Training
Wang, P., Wu, P., Wang, J., Chi, H.-L., & Wang, X. (2018) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph15061204 · Cited by 779
Self-citationIbáñez, M. B., Di Serio, Á., Villarán, D., & Delgado Kloos, C. (2014) · Computers & Education · doi:10.1016/j.compedu.2013.09.004 · Cited by 591
Meta-analysis of the impact of Augmented Reality on students’ learning gains
Garzón, J., & Acevedo, J. (2019) · Educational Research Review · doi:10.1016/j.edurev.2019.04.001 · Cited by 491
Chi, H.-L., Kang, S.-C., & Wang, X. (2013) · Automation in Construction · doi:10.1016/j.autcon.2012.12.017 · Cited by 476
Self-citation
Metadata
- Authors
- Chen, Y.-C., Chi, H.-L., Hung, W.-H., & Kang, S.-C.
- Venue
- Journal of Professional Issues in Engineering Education and Practice
- Published
- 2011-10
- Volume
- 137
- Issue
- 4
- Pages
- 267-276
- ISSN
- 1052-3928 (ISSN-L)
- 1943-5541
- OpenAlex
- W2058394064
- Cited by
- 183
- References
- 1
- FWCI
- 8.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Use of Tangible and Augmented Reality Models in Engineering Graphics Courses. https://app.cochat.ai/papers/10.1061/(asce)ei.1943-5541.0000078
- The paper
- Chen, Y.-C., Chi, H.-L., Hung, W.-H., & Kang, S.-C. (2011). Use of Tangible and Augmented Reality Models in Engineering Graphics Courses. Journal of Professional Issues in Engineering Education and Practice. https://doi.org/10.1061/(asce)ei.1943-5541.0000078
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.