The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion
Abstract
An excellent adhesion of hard coatings to steel substrates is paramount in practically all application areas. Conventional methods utilize Ar glow etching or cathodic arc discharge pretreatments that have the disadvantage of producing weak interfaces or adding droplets, respectively. One tool for interface engineering is high power impulse magnetron sputtering (HIPIMS). HIPIMS is based on conventional sputtering with extremely high peak power densities reaching 3kWcm−2 at current densities of >2Acm−2. HIPIMS of Cr and Nb was used to prepare interfaces on 304 stainless steel and M2 high speed steel (HSS). During the pretreatment, the substrates were biased to Ubias=−600V and Ubias=−1000V in the environment of a HIPIMS of Cr and Nb plasma. The bombarding flux density reached peak values of 300mAcm−2 and consisted of highly ionized metal plasma containing a high proportion of Cr1+ and Nb1+. Pretreatments were also carried out with Ar glow discharge and filtered cathodic arc as comparison. The adhesion was evaluated for coatings consisting of a 0.3μm thick CrN base layer and a 4μm thick nanolayer stack of CrN∕NbN with a period of 3.4nm, hardness of HK0.025=3100, and residual stress of −1.8GPa. For HIPIMS of Cr pretreatment, the adhesion values on M2 HSS reached scratch test critical load values of LC=70N, thus comparing well to LC=51N for interfaces pretreated by arc discharge plasmas and to LC=25N for Ar etching. Cross sectional transmission electron microscopy studies revealed a clean interface and large areas of epitaxial growth in the case of HIPIMS pretreatment. The HIPIMS pretreatment promoted strong registry between the orientation of the coating and polycrystalline substrate grains due to the incorporation of metal ions and the preservation of crystallinity of the substrate. Evidence and conditions for the formation of cube-on-cube epitaxy and axiotaxy on steel and γ-TiAl substrates are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A novel pulsed magnetron sputter technique utilizing very high target power densities
Kouznetsov, V., Macák, K., Schneider, J. M., Helmersson, U., & Petrov, I. (1999) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00292-3 · Cited by 1,080
Self-citationReinhard, C., Ehiasarian, A. P., & Hovsepian, P. E. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.014 · Cited by 68
Self-citationKato, T., Jeong, G., Hirata, T., & Hatakeyama, R. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.12.002 · Cited by 34
Cited by
High power pulsed magnetron sputtering: A review on scientific and engineering state of the art
Sarakinos, K., Alami, J., & Konstantinidis, S. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.11.013 · Cited by 1,075
A structure zone diagram including plasma-based deposition and ion etching
Anders, A. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2009.10.145 · Cited by 980
High power impulse magnetron sputtering discharge
Gudmundsson, J. T., Brenning, N., Lundin, D., & Helmersson, U. (2012) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.3691832 · Cited by 761
Fu, Y. Q., Luo, J. K., Nguyen, N. T., Walton, A. J., Flewitt, A. J., Zu, X. T., Li, Y., McHale, G., Matthews, A., Iborra, E., et al. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.006 · Cited by 646
Physical Vapor Deposition Technology for Coated Cutting Tools: A Review
Deng, Y., Chen, W., Li, B., Wang, C., Kuang, T., & Li, Y. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.04.168 · Cited by 311
An introduction to thin film processing using high-power impulse magnetron sputtering
Lundin, D., & Sarakinos, K. (2012) · Journal of Materials Research · doi:10.1557/jmr.2012.8 · Cited by 306
Reactive HiPIMS Deposition of SiO2/Ta2O5 Optical Interference Filters
Hála, M., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.-E., & Martinu, L. (2014) · Journal of Applied Physics · doi:10.1063/1.4903285 · Cited by 51
Metadata
- Authors
- Ehiasarian, A. P., Wen, J. G., & Petrov, I.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2007-03-01
- Volume
- 101
- Issue
- 5
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2107274894
- Cited by
- 299
- References
- 3
- FWCI
- 30.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.