A 3 omega method to measure an arbitrary anisotropic thermal conductivity tensor
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Previous use of the 3 omega method has been limited to materials with thermal conductivity tensors that are either isotropic or have their principal axes aligned with the natural cartesian coordinate system defined by the heater line and sample surface. Here, we consider the more general case of an anisotropic thermal conductivity tensor with finite off-diagonal terms in this coordinate system. An exact closed form solution for surface temperature has been found for the case of an ideal 3 omega heater line of finite width and infinite length, and verified numerically. We find that the common slope method of data processing yields the determinant of the thermal conductivity tensor, which is invariant upon rotation about the heater line’s axis. Following this analytic result, an experimental scheme is proposed to isolate the thermal conductivity tensor elements. Using two heater lines and a known volumetric heat capacity, the arbitrary 2-dimensional anisotropic thermal conductivity tensor can be measured with a low frequency sweep. Four heater lines would be required to extend this method to measure all 6 unknown tensor elements in 3 dimensions. Experiments with anisotropic layered mica are carried out to demonstrate the analytical results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal conductivity measurement from 30 to 750 K: the 3ω method
Cahill, D. G. (1990) · Review of Scientific Instruments · doi:10.1063/1.1141498 · Cited by 1,928
Polyethylene nanofibres with very high thermal conductivities
Shen, S., Henry, A., Tong, J., Zheng, R., & Chen, G. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.27 · Cited by 926
Thermal conductivity of a -Si:H thin films
Cahill, D. G., Katiyar, M., & Abelson, J. R. (1994) · Physical Review B · doi:10.1103/physrevb.50.6077 · Cited by 523
Thermal conductance of metal-metal interfaces
Gundrum, B. C., Cahill, D. G., & Averback, R. S. (2005) · Physical Review B · doi:10.1103/physrevb.72.245426 · Cited by 417
1 ω , 2 ω , and 3ω methods for measurements of thermal properties
Dames, C., & Chen, G. (2005) · Review of Scientific Instruments · doi:10.1063/1.2130718 · Cited by 275
Self-citationPump-probe measurements of the thermal conductivity tensor for materials lacking in-plane symmetry
Feser, J. P., Liu, J., & Cahill, D. G. (2014) · Review of Scientific Instruments · doi:10.1063/1.4897622 · Cited by 151
Cited by
High thermal conductivity in soft elastomers with elongated liquid metal inclusions
Bartlett, M. D., Kazem, N., Powell-Palm, M. J., Huang, X., Sun, W., Malen, J. A., & Majidi, C. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1616377114 · Cited by 682
Zhao, D., Qian, X., Gu, X., Jajja, S. A., & Yang, R. (2016) · Journal of Electronic Packaging · doi:10.1115/1.4034605 · Cited by 559
“method that can measure an arbitrarily aligned anisotropic thermal conductivity tensor [84].”
MethodJiang, P., Qian, X., & Yang, R. (2018) · Journal of Applied Physics · doi:10.1063/1.5046944 · Cited by 424
Jiang, P., Qian, X., Gu, X., & Yang, R. (2017) · Advanced Materials · doi:10.1002/adma.201701068 · Cited by 239
Jiang, P., Qian, X., & Yang, R. (2017) · Review of Scientific Instruments · doi:10.1063/1.4991715 · Cited by 175
Metadata
- Authors
- Mishra, V., Hardin, C. L., Garay, J. E., & Dames, C.
- Venue
- Review of Scientific Instruments
- Publisher
- AIP Publishing
- Published
- 2015-05-01
- Volume
- 86
- Issue
- 5
- Pages
- 054902-054902
- ISSN
- 0034-6748 (ISSN-L)
- 1089-7623
- OpenAlex
- W1516649739
- Cited by
- 73
- References
- 6
- FWCI
- 2.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A 3 omega method to measure an arbitrary anisotropic thermal conductivity tensor. https://app.cochat.ai/papers/10.1063/1.4918800
- The paper
- Mishra, V., Hardin, C. L., Garay, J. E., & Dames, C. (2015). A 3 omega method to measure an arbitrary anisotropic thermal conductivity tensor. Review of Scientific Instruments. https://doi.org/10.1063/1.4918800
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.