The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Experimental and theoretical characterization of ordered MAX phases Mo2TiAlC2 and Mo2Ti2AlC3
Open accessAbstract
Herein, we report on the phase stabilities and crystal structures of two newly discovered ordered, quaternary MAX phases—Mo2TiAlC2 and Mo2Ti2AlC3—synthesized by mixing and heating different elemental powder mixtures of mMo:(3-m)Ti:1.1Al:2C with 1.5 ≤ m ≤ 2.2 and 2Mo: 2Ti:1.1Al:2.7C to 1600 °C for 4 h under Ar flow. In general, for m ≥ 2 an ordered 312 phase, (Mo2Ti)AlC2, was the majority phase; for m < 2, an ordered 413 phase (Mo2Ti2)AlC3, was the major product. The actual chemistries determined from X-ray photoelectron spectroscopy (XPS) are Mo2TiAlC1.7 and Mo2Ti1.9Al0.9C2.5, respectively. High resolution scanning transmission microscopy, XPS and Rietveld analysis of powder X-ray diffraction confirmed the general ordered stacking sequence to be Mo-Ti-Mo-Al-Mo-Ti-Mo for Mo2TiAlC2 and Mo-Ti-Ti-Mo-Al-Mo-Ti-Ti-Mo for Mo2Ti2AlC3, with the carbon atoms occupying the octahedral sites between the transition metal layers. Consistent with the experimental results, the theoretical calculations clearly show that M layer ordering is mostly driven by the high penalty paid in energy by having the Mo atoms surrounded by C in a face-centered configuration, i.e., in the center of the Mn+1Xn blocks. At 331 GPa and 367 GPa, respectively, the Young's moduli of the ordered Mo2TiAlC2 and Mo2Ti2AlC3 are predicted to be higher than those calculated for their ternary end members. Like most other MAX phases, because of the high density of states at the Fermi level, the resistivity measurement over 300 to 10 K for both phases showed metallic behavior.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
A profile refinement method for nuclear and magnetic structures
Rietveld, H. M. (1969) · Journal of Applied Crystallography · doi:10.1107/s0021889869006558 · Cited by 17,524
Recent advances in magnetic structure determination by neutron powder diffraction
Rodríguez-Carvajal, J. (1993) · Physica B: Condensed Matter · doi:10.1016/0921-4526(93)90108-i · Cited by 15,608
Ab initio molecular dynamics for open-shell transition metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.48.13115 · Cited by 8,359
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Self-citationBiesinger, M. C., Lau, L. W. M., Gerson, A. R., & Smart, R. S. C. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.07.086 · Cited by 4,592
Special quasirandom structures
Zunger, A., Wei, S.-H., Ferreira, L. G., & Bernard, J. E. (1990) · Physical Review Letters · doi:10.1103/physrevlett.65.353 · Cited by 3,935
Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)
Anasori, B., Xie, Y., Beidaghi, M., Lu, J., Hosler, B. C., Hultman, L., Kent, P. R. C., Gogotsi, Y., & Barsoum, M. W. (2015) · ACS Nano · doi:10.1021/acsnano.5b03591 · Cited by 2,110
Self-citationTransparent Conductive Two-Dimensional Titanium Carbide Epitaxial Thin Films
Halim, J., Lukatskaya, M. R., Cook, K. M., Lu, J., Smith, C. R., Näslund, L.-Å., May, S. J., Hultman, L., Gogotsi, Y., Eklund, P., et al. (2014) · Chemistry of Materials · doi:10.1021/cm500641a · Cited by 1,698
Self-citationElastic and Mechanical Properties of the MAX Phases
Barsoum, M. W., & Radovic, M. (2011) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-062910-100448 · Cited by 1,250
Self-citationEncyclopedia of materials science and technology
McLean, M. (1986) · International Metals Reviews · doi:10.1179/imtr.1986.31.1.289 · Cited by 489
Microstructured reactors for catalytic reactions
Kiwi‐Minsker, L., & Renken, A. (2005) · Catalysis Today · doi:10.1016/j.cattod.2005.09.011 · Cited by 464
A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2and Cr2AlC in Air
Tallman, D. J., Anasori, B., & Barsoum, M. W. (2013) · Materials Research Letters · doi:10.1080/21663831.2013.806364 · Cited by 400
Self-citationOxidation-induced crack healing in Ti3AlC2 ceramics
Song, G. M., Pei, Y. T., Sloof, W. G., Li, S. B., De Hosson, J. T. M., & van der Zwaag, S. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.09.006 · Cited by 264
Mo2Ga2C: a new ternary nanolaminated carbide
Hu, C., Lai, C.-C., Tao, Q., Lu, J., Halim, J., Sun, L., Zhang, J., Yang, J., Anasori, B., Wang, J., et al. (2015) · Chemical Communications · doi:10.1039/c5cc00980d · Cited by 205
Self-citationA conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage
Farle, A.-S., Kwakernaak, C., van der Zwaag, S., & Sloof, W. G. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.08.046 · Cited by 185
Crystal-chemistry of the Ti3AlC2 and Ti4AlN3 layered carbide/nitride phases—characterization by XPS
Myhra, S., Crossley, J. A. A., & Barsoum, M. W. (2001) · Journal of Physics and Chemistry of Solids · doi:10.1016/s0022-3697(00)00268-7 · Cited by 178
Self-citationNaguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201470041 · Cited by 161
Self-citationHugosson, H. W., Eriksson, O., Nordström, L., Jansson, U., Fast, L., Delin, A., Wills, J. M., & Johansson, B. (1999) · Journal of Applied Physics · doi:10.1063/1.371284 · Cited by 131
Self-healing performance of Ti2AlC ceramic
Yang, H. J., Pei, Y. T., Rao, J., & Hosson, J. T. M. D. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm16123k · Cited by 96
Cited by
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citationTwo-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)
Anasori, B., Xie, Y., Beidaghi, M., Lu, J., Hosler, B. C., Hultman, L., Kent, P. R. C., Gogotsi, Y., & Barsoum, M. W. (2015) · ACS Nano · doi:10.1021/acsnano.5b03591 · Cited by 2,110
Self-citationSynthesis of two-dimensional titanium nitride Ti4N3(MXene)
Urbankowski, P., Anasori, B., Makaryan, T., Er, D., Kota, S., Walsh, P. L., Zhao, M., Shenoy, V. B., Barsoum, M. W., & Gogotsi, Y. (2016) · Nanoscale · doi:10.1039/c6nr02253g · Cited by 1,371
Self-citationCharacterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
2D MXenes: Tunable Mechanical and Tribological Properties
Wyatt, B. C., Rosenkranz, A., & Anasori, B. (2021) · Advanced Materials · doi:10.1002/adma.202007973 · Cited by 646
Self-citation
Metadata
- Authors
- Anasori, B., Dahlqvist, M., Halim, J., Moon, E. J., Lu, J., Hosler, B. C., Caspi, E. N., May, S. J., Hultman, L., Eklund, P., Rosén, J., & Barsoum, M. W.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2015-09-03
- Volume
- 118
- Issue
- 9
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1784263311
- Cited by
- 339
- References
- 24
- FWCI
- 7.86
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.