The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)
Open accessAbstract
High Power Impulse Magnetron Sputtering (HiPIMS) is a coating technology that combines magnetron sputtering with pulsed power concepts. By applying power in pulses of high amplitude and a relatively low duty cycle, large fractions of sputtered atoms and near-target gases are ionized. In contrast to conventional magnetron sputtering, HiPIMS is characterized by self-sputtering or repeated gas recycling for high and low sputter yield materials, respectively, and both for most intermediate materials. The dense plasma in front of the target has the dual function of sustaining the discharge and providing plasma-assistance to film growth, affecting the microstructure of growing films. Many technologically interesting thin films are compound films, which are composed of one or more metals and a reactive gas, most often oxygen or nitrogen. When reactive gas is added, non-trivial consequences arise for the system because the target may become “poisoned,” i.e., a compound layer forms on the target surface affecting the sputtering yield and the yield of secondary electron emission and thereby all other parameters. It is emphasized that the target state depends not only on the reactive gas' partial pressure (balanced via gas flow and pumping) but also on the ion flux to the target, which can be controlled by pulse parameters. This is a critical technological opportunity for reactive HiPIMS (R-HiPIMS). The scope of this tutorial is focused on plasma processes and mechanisms of operation and only briefly touches upon film properties. It introduces R-HiPIMS in a systematic, step-by-step approach by covering sputtering, magnetron sputtering, reactive magnetron sputtering, pulsed reactive magnetron sputtering, HiPIMS, and finally R-HiPIMS. The tutorial is concluded by considering variations of R-HiPIMS known as modulated pulsed power magnetron sputtering and deep-oscillation magnetron sputtering and combinations of R-HiPIMS with superimposed dc magnetron sputtering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets
Sigmund, P. (1969) · Physical Review · doi:10.1103/physrev.184.383 · Cited by 3,589
Thornton, J. A. (1974) · Journal of Vacuum Science and Technology · doi:10.1116/1.1312732 · Cited by 2,421
A novel pulsed magnetron sputter technique utilizing very high target power densities
Kouznetsov, V., Macák, K., Schneider, J. M., Helmersson, U., & Petrov, I. (1999) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00292-3 · Cited by 1,080
A structure zone diagram including plasma-based deposition and ion etching
Anders, A. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2009.10.145 · Cited by 980
Self-citationSputtering by Particle Bombardment
(2007) · Topics in Applied Physics · doi:10.1007/978-3-540-44502-9 · Cited by 776
ENERGY DEPENDENCE OF ION-INDUCED SPUTTERING YIELDS FROM MONATOMIC SOLIDS AT NORMAL INCIDENCE
YAMAMURA, Y., & TAWARA, H. (1996) · Atomic Data and Nuclear Data Tables · doi:10.1006/adnd.1996.0005 · Cited by 771
High power impulse magnetron sputtering discharge
Gudmundsson, J. T., Brenning, N., Lundin, D., & Helmersson, U. (2012) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.3691832 · Cited by 761
Tutorial: Physics and modeling of Hall thrusters
Boeuf, J.-P. (2017) · Journal of Applied Physics · doi:10.1063/1.4972269 · Cited by 504
Charged particle fluxes from planar magnetron sputtering sources
Window, B., & Savvides, N. (1986) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.573470 · Cited by 424
Handbook of deposition technologies for films and coatings
Martin, P. M. (2010) · Cited by 408
Magnetron sputtering: basic physics and application to cylindrical magnetrons
Thornton, J. A. (1978) · Journal of Vacuum Science and Technology · doi:10.1116/1.569448 · Cited by 373
Pulsed magnetron sputter technology
Schiller, S., Goedicke, K., Reschke, J., Kirchhoff, V., Schneider, S., & Milde, F. (1993) · Surface and Coatings Technology · doi:10.1016/0257-8972(93)90248-m · Cited by 338
A universal relation for the sputtering yield of monatomic solids at normal ion incidence
Bohdansky, J. (1984) · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · doi:10.1016/0168-583x(84)90271-4 · Cited by 316
Anomalous Electron Diffusion and Ion Acceleration in a Low-Density Plasma
Janes, G. S., & Lowder, R. S. (1966) · The Physics of Fluids · doi:10.1063/1.1761810 · Cited by 308
Discharge physics of high power impulse magnetron sputtering
Anders, A. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.03.081 · Cited by 299
Self-citationIon-induced electron emission from clean metals
Baragiola, R. A., Alonso, E. V., Ferron, J., & Oliva-Florio, A. (1979) · Surface Science · doi:10.1016/0039-6028(79)90341-8 · Cited by 283
Spatially averaged (global) model of time modulated high density argon plasmas
Ashida, S., Lee, C., & Lieberman, M. A. (1995) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.579494 · Cited by 278
Gas density reduction effects in magnetrons
Rossnagel, S. M. (1988) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.574988 · Cited by 276
Magnetron sputter deposition: Linking discharge voltage with target properties
Depla, D., Mahieu, S., & De Gryse, R. (2009) · Thin Solid Films · doi:10.1016/j.tsf.2008.11.108 · Cited by 224
Depla, D., Mahieu, S., & Greene, J. E. (2009) · Elsevier eBooks · doi:10.1016/b978-0-8155-2031-3.00005-3 · Cited by 223
Unbalanced dc magnetrons as sources of high ion fluxes
Window, B., & Savvides, N. (1986) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.573904 · Cited by 212
Anders, A., Ni, P., & Rauch, A. (2012) · Journal of Applied Physics · doi:10.1063/1.3692978 · Cited by 179
Self-citationA review of metal-ion-flux-controlled growth of metastable TiAlN by HIPIMS/DCMS co-sputtering
Greczyński, G., Lu, J., Jensen, J., et al. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.01.055 · Cited by 164
Titanium oxide thin films deposited by high-power impulse magnetron sputtering
Konstantinidis, S., Dauchot, J. P., & Hecq, M. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2006.07.089 · Cited by 159
Lattemann, M., Ehiasarian, A. P., Böhlmark, J., et al. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.11.082 · Cited by 158
Hysteresis-free reactive high power impulse magnetron sputtering
Wallin, E., & Helmersson, U. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.08.123 · Cited by 155
Bradley, J. W., Thompson, S., & Gonzalvo, Y. A. (2001) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/10/3/314 · Cited by 153
Repulsive Interaction Potentials between Rare-Gas Atoms. Homonuclear Two-Center Systems
Abrahamson, A. A. (1963) · Physical Review · doi:10.1103/physrev.130.693 · Cited by 153
Lin, J., Sproul, W. D., Moore, J. J., et al. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.11.039 · Cited by 152
Greczyński, G., Lü, J., Johansson, M., et al. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.04.024 · Cited by 144
An ionization region model of the reactive Ar/O 2 high power impulse magnetron sputtering discharge
Guðmundsson, J. T., Lundin, D., Brenning, N., Raadu, M. A., Huo, C., & Minea, T. M. (2016) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/25/6/065004 · Cited by 144
Target poisoning during reactive magnetron sputtering: Part I: the influence of ion implantation
Depla, D., & Gryse, R. D. (2003) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2003.10.006 · Cited by 142
Gas rarefaction and the time evolution of long high-power impulse magnetron sputtering pulses
Huo, C., Raadu, M. A., Lundin, D., Guðmundsson, J. T., Anders, A., & Brenning, N. (2012) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/21/4/045004 · Cited by 137
Self-citationPlasma diagnostics for understanding the plasma–surface interaction in HiPIMS discharges: a review
Britun, N. V., Minea, T. M., Konstantinidis, S., & Snyders, R. (2014) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/47/22/224001 · Cited by 134
Hoffman, D. W. (1985) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.572994 · Cited by 134
An ionization region model for high-power impulse magnetron sputtering discharges
Raadu, M. A., Axnäs, I., Guðmundsson, J. T., Huo, C., & Brenning, N. (2011) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/20/6/065007 · Cited by 134
High power impulse magnetron sputtering discharges: Instabilities and plasma self-organization
Ehiasarian, A. P., Hećimović, A., Arcos, T. D. L., New, R., der Gathen, V. S.-V., Böke, M., & Winter, J. (2012) · Applied Physics Letters · doi:10.1063/1.3692172 · Cited by 129
Anders, A., Čapek, J., Hála, M., & Martinu, L. (2011) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/45/1/012003 · Cited by 109
Self-citationPhysics of arcing, and implications to sputter deposition
Anders, A. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2005.07.228 · Cited by 109
Self-citationThermochromic VO2 thin films deposited by HiPIMS
Fortier, J.-P., Baloukas, B., Zabeida, O., Klemberg-Sapieha, J. E., & Martinu, L. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.03.007 · Cited by 108
On sheath energization and Ohmic heating in sputtering magnetrons
Huo, C., Lundin, D., Raadu, M. A., Anders, A., Guðmundsson, J. T., & Brenning, N. (2013) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/22/4/045005 · Cited by 102
Self-citationOptical studies of plasma inhomogeneities in a high-current pulsed magnetron discharge
Kozyrev, A. V., SOCHUGOV, N. S., Oskomov, K. V., Захаров, А. Н., & Odivanova, A. N. (2011) · Plasma Physics Reports · doi:10.1134/s1063780x11060122 · Cited by 102
Plasma potential of a moving ionization zone in DC magnetron sputtering
Panjan, M., & Anders, A. (2017) · Journal of Applied Physics · doi:10.1063/1.4974944 · Cited by 97
Self-citationRotating Instability in Low-Temperature Magnetized Plasmas
Bœuf, J.-P., & Chaudhury, B. (2013) · Physical Review Letters · doi:10.1103/physrevlett.111.155005 · Cited by 93
Hála, M., Čapek, J., Zabeida, O., Klemberg-Sapieha, J. E., & Martinu, L. (2012) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/45/5/055204 · Cited by 89
Mickan, M., Helmersson, U., Rinnert, H., Ghanbaja, J., Muller, D., & Horwat, D. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.07.020 · Cited by 83
Lin, J., Wang, B., Ou, Y., et al. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.11.053 · Cited by 82
Sarakinos, K., Alami, J., Klever, C., & Wuttig, M. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.05.009 · Cited by 81
Dynamic behaviour of the reactive sputtering process
Kubart, T., Kappertz, O., Nyberg, T., & Berg, S. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2005.12.250 · Cited by 80
Greczyński, G., Lu, J., Johansson, M., et al. (2011) · Vacuum · doi:10.1016/j.vacuum.2011.10.027 · Cited by 78
Studies of hysteresis effect in reactive HiPIMS deposition of oxides
Kubart, T., Aiempanakit, M., Andersson, J., Nyberg, T., Berg, S., & Helmersson, U. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.01.019 · Cited by 72
Non-uniform plasma distribution in dc magnetron sputtering: origin, shape and structuring of spokes
Panjan, M., Loquai, S., Klemberg-Sapieha, J. E., & Martinu, L. (2015) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/24/6/065010 · Cited by 64
Ou, Y., Lin, J., Tong, S. Y., et al. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.10.009 · Cited by 63
Magnus, F., Sveinsson, O. B., Ólafsson, S., & Guðmundsson, J. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3653233 · Cited by 62
Deposition of zinc oxide layers by high-power impulse magnetron sputtering
Konstantinidis, S., Hemberg, A., Dauchot, J. P., & Hecq, M. (2007) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.2735968 · Cited by 61
Spectroscopic imaging of self-organization in high power impulse magnetron sputtering plasmas
Andersson, J., Ni, P., & Anders, A. (2013) · Applied Physics Letters · doi:10.1063/1.4817257 · Cited by 61
Self-citationThe role of Ohmic heating in dc magnetron sputtering
Brenning, N., Guðmundsson, J. T., Lundin, D., Minea, T. M., Raadu, M. A., & Helmersson, U. (2016) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/25/6/065024 · Cited by 61
Spoke rotation reversal in magnetron discharges of aluminium, chromium and titanium
Hećimović, A., Maszl, C., der Gathen, V. S.-V., Böke, M., & von Keudell, A. (2016) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/25/3/035001 · Cited by 60
HiPIMS-deposited thermochromic VO2 films with high environmental stability
Loquai, S., Baloukas, B., Klemberg-Sapieha, J. E., & Martinu, L. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.10.038 · Cited by 60
Nouvellon, C., Michiels, M., Dauchot, J. P., Archambeau, C., Laffineur, F., Silberberg, E., Delvaux, S., Cloots, R., Konstantinidis, S., & Snyders, R. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.02.034 · Cited by 58
Structure and properties of Cr2O3 coatings deposited using DCMS, PDCMS, and DOMS
Lin, J., & Sproul, W. D. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.06.044 · Cited by 57
Vlček, J., Belosludtsev, A., Rezek, J., Houška, J., Čapek, J., Čerstvý, R., & Haviar, S. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.08.024 · Cited by 55
Serikov, V. V., & Nanbu, K. (1997) · Journal of Applied Physics · doi:10.1063/1.366497 · Cited by 55
Welzel, T., & Ellmer, K. (2012) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.4762815 · Cited by 55
Anders, A. (2014) · Applied Physics Letters · doi:10.1063/1.4904713 · Cited by 55
Self-citationAsymmetric particle fluxes from drifting ionization zones in sputtering magnetrons
Panjan, M., Franz, R., & Anders, A. (2014) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/23/2/025007 · Cited by 54
Self-citationReactive HiPIMS Deposition of SiO2/Ta2O5 Optical Interference Filters
Hála, M., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.-E., & Martinu, L. (2014) · Journal of Applied Physics · doi:10.1063/1.4903285 · Cited by 51
Shimizu, T., Villamayor, M. M. S., Lundin, D., & Helmersson, U. (2016) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/49/6/065202 · Cited by 49
Plasma flares in high power impulse magnetron sputtering
Ni, P., Hornschuch, C., Panjan, M., & Anders, A. (2012) · Applied Physics Letters · doi:10.1063/1.4768925 · Cited by 48
Self-citationCooke, K., Hamsphire, J., Southall, W., & Teer, D. G. (2003) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2003.06.009 · Cited by 47
Modeling reactive magnetron sputtering: Fixing the parameter set
Strijckmans, K., Leroy, W., Gryse, R. D., & Depla, D. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.03.019 · Cited by 45
Čapek, J., Hála, M., Zabeida, O., Klemberg-Sapieha, J. E., & Martinu, L. (2012) · Journal of Applied Physics · doi:10.1063/1.3673871 · Cited by 43
Bobzin, K., Brögelmann, T., Grundmeier, G., et al. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.07.093 · Cited by 43
A parametric model for reactive high-power impulse magnetron sputtering of films
Kozák, T., & Vlček, J. (2015) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/49/5/055202 · Cited by 41
Influence of dcMS and HPPMS in a dcMS/HPPMS hybrid process on plasma and coating properties
Bobzin, K., Brögelmann, T., Kruppe, N. C., et al. (2016) · Thin Solid Films · doi:10.1016/j.tsf.2016.07.079 · Cited by 40
High power pulsed magnetron sputtering: A method to increase deposition rate
Raman, P., Shchelkanov, I. A., McLain, J. T., et al. (2015) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.4916108 · Cited by 37
Structure evolution and properties of TiAlCN/VCN coatings deposited by reactive HIPIMS
Hovsepian, P. E., Ehiasarian, A. P., & Petrov, I. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.07.065 · Cited by 31
A marked correlation function for constraining modified gravity models
White, M. (2016) · eScholarship (California Digital Library) · Cited by 31
Growth and properties of high index Ta2O5 optical coatings prepared by HiPIMS and other methods
Hála, M., Vernhes, R., Zabeida, O., Bousser, É., Klemberg-Sapieha, J. E., Sargent, R. B., & Martinu, L. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.08.024 · Cited by 28
Benzeggouta, D., Hugon, M. C., & Bretagne, J. (2009) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/18/4/045026 · Cited by 26
Drifting Ionization Zone in DC Magnetron Sputtering Discharges at Very Low Currents
Anders, A., Ni, P., & Andersson, J. (2014) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2014.2334601 · Cited by 23
Self-citationOn the electron drift velocity in plasma devices with E×B drift
Chapurin, O., & Smolyakov, A. I. (2016) · Journal of Applied Physics · doi:10.1063/1.4954994 · Cited by 17
Hovsepian, P. E., Ehiasarian, A. P., Deeming, A., et al. (2007) · Plasma Processes and Polymers · doi:10.1002/ppap.200732201 · Cited by 10
Ion flux-film structure relationship during magnetron sputtering of WO3
Hemberg, A., Konstantinidis, S., Renaux, F., Dauchot, J. P., & Snyders, R. (2011) · The European Physical Journal Applied Physics · doi:10.1051/epjap/2011110200 · Cited by 8
Bobzin, K., Bagcivan, N., Theiß, S., et al. (2014) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.4865917 · Cited by 7
Cited by
Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G. B., Barthel, E., Doll, G. L., Murray, C. E., Stoessel, C. H., & Martinu, L. (2018) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.5011790 · Cited by 858
The 2022 Plasma Roadmap: low temperature plasma science and technology
Adamovich, I., Agarwal, S., Ahedo, E., Alves, L. L., Baalrud, S., Babaeva, N., Bogaerts, A., Bourdon, A., Bruggeman, P. J., Canal, C., et al. (2022) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/ac5e1c · Cited by 536
Physics and technology of magnetron sputtering discharges
Gudmundsson, J. T. (2020) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/abb7bd · Cited by 532
Machine Learning Directed Search for Ultraincompressible, Superhard Materials
Mansouri Tehrani, A., Oliynyk, A. O., Parry, M., Rizvi, Z., Couper, S., Lin, F., Miyagi, L., Sparks, T. D., & Brgoch, J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b02717 · Cited by 317
Physics of E × B discharges relevant to plasma propulsion and similar technologies
Kaganovich, I. D., Smolyakov, A., Raitses, Y., Ahedo, E., Mikellides, I. G., Jorns, B., Taccogna, F., Gueroult, R., Tsikata, S., Bourdon, A., et al. (2020) · Physics of Plasmas · doi:10.1063/5.0010135 · Cited by 202
“…75 there is strong evidence from numerous experiments in high power pulsed magnetron discharges (High Power Impulse Magnetron Sputtering—HiPIMS discharges) and in lower power, DC magnetron discharges 99,100,103 that ionization can play an important role in the formation and dynamics of spokes.”
Metadata
- Authors
- Anders, A.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2017-03-21
- Volume
- 121
- Issue
- 17
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2600181206
- Cited by
- 424
- References
- 85
- FWCI
- 30.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.