The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Evaluation of bioink printability for bioprinting applications
Abstract
Three-dimensional (3D) bioprinting, as a freeform biomedical manufacturing approach, has been increasingly adopted for the fabrication of constructs analogous to living tissues. Generally, materials printed during 3D bioprinting are referred as bioinks, which may include living cells, extracellular matrix materials, cell media, and/or other additives. For 3D bioprinting to be an enabling tissue engineering approach, the bioink printability is a critical requirement as tissue constructs must be able to be printed and reproduce the complex micro-architecture of native tissues in vitro in sufficient resolution. The bioink printability is generally characterized in terms of the controllable formation of well-defined droplets/jets/filaments and/or the morphology and shape fidelity of deposited building blocks. This review presents a comprehensive overview of the studies of bioink printability during representative 3D bioprinting processes, including inkjet printing, laser printing, and micro-extrusion, with a focus on the understanding of the underlying physics during the formation of bioink-based features. A detailed discussion is conducted based on the typical time scales and dimensionless quantities for printability evaluation during bioprinting. For inkjet printing, the Z (the inverse of the Ohnesorge number), Weber, and capillary numbers have been employed for the construction of phase diagrams during the printing of Newtonian fluids, while the Weissenberg and Deborah numbers have been utilized during the printing of non-Newtonian bioinks. During laser printing of Newtonian solutions, the jettability can be characterized using the inverse of the Ohnesorge number, while Ohnesorge, elasto-capillary, and Weber numbers have been utilized to construct phase diagrams for typical non-Newtonian bioinks. For micro-extrusion, seven filament types have been identified including three types of well-defined filaments and four types of irregular filaments. During micro-extrusion, the Oldroyd number has been used to characterize the dimensions of the yielded areas of Herschel-Bulkley fluids. Non-ideal jetting behaviors are common during the droplet-based inkjet and laser printing processes due to the local nonuniformity and nonhomogeneity of cell-laden bioinks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero-Espinosa, S., Baker, M. B., Wieringa, P., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 345
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Metadata
- Authors
- Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., & Huang, Y.
- Venue
- Applied Physics Reviews
- Publisher
- AIP Publishing
- Published
- 2018-12-01
- Volume
- 5
- Issue
- 4
- ISSN
- 1931-9401 (ISSN-L)
- OpenAlex
- W2903723527
- Cited by
- 214
- References
- 14
- FWCI
- 7.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluation of bioink printability for bioprinting applications. https://app.cochat.ai/papers/10.1063/1.5053979
- The paper
- Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., & Huang, Y. (2018). Evaluation of bioink printability for bioprinting applications. Applied Physics Reviews. https://doi.org/10.1063/1.5053979
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.