Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 164

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Thermal conductance across β-Ga2O3-diamond van der Waals heterogeneous interfaces

Open access
Cheng, Zhe, Yates, Luke, Shi, Jingjing, Tadjer, Marko J., Hobart, Karl D., Graham, Samuel · 2019 · APL Materials

Abstract

Because of its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt, β-Ga2O3 has attracted great attention recently for potential applications of power electronics. However, its thermal conductivity is significantly lower than those of other wide bandgap semiconductors, such as AlN, SiC, GaN, and diamond. To ensure reliable operation with minimal self-heating at high power, proper thermal management is even more essential for Ga2O3 devices. Similar to the past approaches aiming to alleviate self-heating in GaN high electron mobility transistors, a possible solution has been to integrate thin Ga2O3 membranes with diamond to fabricate Ga2O3-on-diamond lateral metal-semiconductor field-effect transistor or metal-oxide-semiconductor field-effect transistor devices by taking advantage of the ultra-high thermal conductivity of diamond. Even though the thermal boundary conductance (TBC) between wide bandgap semiconductor devices and a diamond substrate is of primary importance for heat dissipation in these devices, fundamental understanding of the Ga2O3-diamond thermal interface is still missing. In this work, we study the thermal transport across the interfaces of Ga2O3 exfoliated onto a single crystal diamond. The van der Waals bonded Ga2O3-diamond TBC is measured to be 17 −1.7/+2.0 MW/m2 K, which is comparable to the TBC of several physical-vapor-deposited metals on diamond. A Landauer approach is used to help understand phonon transport across a perfect Ga2O3-diamond interface, which in turn sheds light on the possible TBC one could achieve with an optimized interface. A reduced thermal conductivity of the Ga2O3 nano-membrane is also observed due to additional phonon-membrane boundary scattering. The impact of the Ga2O3–substrate TBC and substrate thermal conductivity on the thermal performance of a power device is modeled and discussed. Without loss of generality, this study is not only important for Ga2O3 power electronics applications which would not be realistic without a thermal management solution but also for the fundamental thermal science of heat transport across van der Waals bonded interfaces.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.5089559

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 164

Metadata

Authors
Cheng, Z., Yates, L., Shi, J., Tadjer, M. J., Hobart, K. D., & Graham, S.
Venue
APL Materials
Published
2019-03-01
Volume
7
Issue
3
ISSN
2166-532X (ISSN-L)
OpenAlex
W2963355303
Cited by
164
References
9
FWCI
6.34
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.