Experimental investigations on thermal management and performance improvement of solar PV panel using a phase change material
The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
This paper experimentally investigates the thermal management and performance improvement of solar PV panel with the help of a Phase Change Material (PCM). The two solar PV panels of 30 Watts nominal power and same configuration were selected for the experiments. The candle making wax (CMW) was chosen to be the PCM. One PV panel named as PV1, which was tested without any physical modification and another panel (named as PV2) was tested after integrating with the PCM at the back side. The solar PV panels were experimented in a solar day from 6 a.m. to 5 p.m. Their panel surface temperature and the electrical efficiencies were observed and compared. The results proved that the PCM reduced the panel surface temperature by 24.24% and decreased the maximum panel temperature by 17.57%. In addition to this, the hourly efficiency of the panel was enhanced by 4.43% and daily efficiency was boosted by 6.34% with the aid of PCM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The recent review papers [14,15] and experimental studies [16,17] evidenced the prospective of highly conductive metal, metal oxide, and carbon-based nanoparticles to augment the thermal properties of organic phase changing compounds.”
From Characterization of Hybrid-nano/Paraffin Organic Phase Change Material for Thermal Energy Storage Applications in Solar Thermal Systems (2020) · cites this paper as [17]
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Nanoparticle Polymer Composites: Where Two Small Worlds Meet
Balazs, A. C., Emrick, T., & Russell, T. P. (2006) · Science · doi:10.1126/science.1130557 · Cited by 2,593
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
A review on phase change materials integrated in building walls
Kuznik, F., David, D., Johannes, K., & Roux, J.-J. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.019 · Cited by 1,057
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
A nano-graphite/paraffin phase change material with high thermal conductivity
Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421
A model for the thermal conductivity of nanofluids – the effect of interfacial layer
Leong, K. C., Yang, C., & Murshed, S. M. S. (2006) · Journal of Nanoparticle Research · doi:10.1007/s11051-005-9018-9 · Cited by 395
Thermal properties of paraffin based composites containing multi-walled carbon nanotubes
Wang, J., Xie, H., & Xin, Z. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.01.022 · Cited by 373
Cited by
Kumar, P. M., & Mylsamy, K. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.08.122 · Cited by 197
Self-citationPasupathi, M. K., Alagar, K., P, M. J. S., M.M, M., & Aritra, G. (2020) · Energies · doi:10.3390/en13195079 · Cited by 171
“The recent review papers [14,15] and experimental studies [16,17] evidenced the prospective of highly conductive metal, metal oxide, and carbon-based nanoparticles to augment the thermal properties of organic phase changing compounds.”
BackgroundSelf-citationInvestigating a single slope solar still with a nano-phase change material
Manoj Kumar, P., Sudarvizhi, D., Prakash, K. B., Anupradeepa, A. M., Boomiha Raj, S., Shanmathi, S., Sumithra, K., & Surya, S. (2021) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.12.804 · Cited by 159
Self-citationInvestigation on indirect solar dryer for drying sliced potatoes using phase change materials (PCM)
Vigneshkumar, N., Venkatasudhahar, M., Kumar, P. M., Ramesh, A., Subbiah, R., Stalin, P. M. J., Suresh, V., Kumar, M. N., Monith, S., Kumar, R., et al. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.05.562 · Cited by 147
Self-citationInvestigation of Inorganic Phase Change Material for a Semi-Transparent Photovoltaic (STPV) Module
Karthick, A., Manokar, A. M., Kumar, P. M., Kumar, N. M., Chopra, S. S., & Ghosh, A. (2020) · Energies · doi:10.3390/en13143582 · Cited by 129
Self-citation
Metadata
- Authors
- Kumar, P. M., Anandkumar, R., Sudarvizhi, D., Prakash, K. B., & Mylsamy, K.
- Affiliations
- KPR Institute of Engineering and Technology (IN)
- Bannari Amman Institute of Technology (IN)
- Dr. N.G.P. Institute of Technology (IN)
- Corresponding author
- Kumar, P. Manoj
- Venue
- AIP Conference Proceedings
- Publisher
- AIP Publishing
- Published
- 2019
- Volume
- 2128
- Pages
- 020023
- ISSN
- 0094-243X (ISSN-L)
- OpenAlex
- W2962990639
- Cited by
- 54
- References
- 22
- Citations by year
- 2025: 2 · 2024: 2 · 2023: 3 · 2022: 8 · 2021: 33 · 2020: 6
- FWCI
- 24.83
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- AIP conference proceedings (publishedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Photovoltaic System Optimization Techniques
- Keywords
- phase change materials, photovoltaic modules, thermal management, panel surface temperature, electrical efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.