Extraction of Copper(II) by CYANEX 302 in Kerosene from Different Aqueous Media
The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
The solvent extraction of Cu(II) with CYANEX 302 (bis(2,4,4‐trimethylpentyl) monothiophosphinic acid) in kerosene from different aqueous solutions including sulphate, chloride, and nitrate media has been systematically investigated. The effect of various parameters such as the time of equilibration, pH, the extractant and metal concentrations, the temperature, as well as the effect of anions on the extraction process has been studied. An equilibrium equation is proposed assuming that copper was first extracted as Cu2+ followed by reduction of to Cu+ while the CYANEX 302 extractant is correspondingly oxidized. The thermodynamic parameters, free energy (ΔG), enthalpy (ΔH), and entropy (ΔS), have been calculated. The stripping of Cu(II) from loaded organic solutions by using different stripping agents showed that effective stripping is obtained upon using high concentration of nitric acid which oxidizes the extracted Cu(I) to Cu(II).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Between HCl and H2SO4 solutions, the separation of Cu(II) by Cyanex 302 from a HCl solution was more e cient than from H2SO4 solution because Cu(II) exists as the hydrated copper species ([Cu2(OH)2] 2 + ) in the sulfate medium which would not be well extracted [26].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [26]
In the citing paper
“For instance, Cu(II) was selectively extracted (96.3%) over other metals such as Pb(II), Zn(II), a low trace of Mn(II), Fe(III), Co(II) and Cd(II) by 0.2 M Cyanex 272 at an equilibrium pH of 5.0”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [26]
In the citing paper
“while the same performance was obtained by 0.08 M Cyanex 301 at an equilibrium pH of 3.8 [25,26].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [26]
In the citing paper
“It has been reported that Cyanex 301 / 302 is better than Cyanex 272 in Cu(II) extractions from hydrochloric acid solutions in terms of loading capacity and solution pH.”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [26]
In the citing paper
“In particular, Cu(II) was stripped from the loaded organic phase of Cyanex 302 by using a high concentration of nitric acid (8-10 M) which acts as an oxidizing agent [26,53].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [26]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Advanced engineering mathematics
(1998) · Choice Reviews Online · doi:10.5860/choice.35-5129 · Cited by 4,100
Handbook of Solvent Extraction
Lo, T. C., Baird, M. H. I., & Hanson, C. A. (1991) · Cited by 983
Spectrophotometric determination of elements
Marczenko, Z. (1976) · Cited by 847
Spectrophotometric determination of elements
Steyermark, A. (1977) · Microchemical Journal · doi:10.1016/0026-265x(77)90041-8 · Cited by 775
Principles and practices of solvent extraction
Rydberg, J., Musikas, C., & Choppin, G. R. (1992) · M. Dekker eBooks · Cited by 461
Principles and practices of solvent extraction
Schügerl, K. (1993) · Journal of Chromatography A · doi:10.1016/0021-9673(93)80303-p · Cited by 399
Advanced Engineering Mathematics: A Second Course
Duffy, D. G. (2022) · Chapman & Hall/CRC eBooks · doi:10.1201/9781003272205 · Cited by 309
Solvent extraction of copper by Cyanex 272, Cyanex 302 and Cyanex 301
Sole, K. C., & Hiskey, J. B. (1995) · Hydrometallurgy · doi:10.1016/0304-386x(94)00023-v · Cited by 173 · cited 5×
“Sole and Hiskey[8] explained the stability of the copper(II) complex with CYANEX 302 by the reduction of copper(II) to copper(I) upon the extraction and the formation of the oligomeric stable complex.”
BackgroundMethodInfluentialThe selective recovery of zinc with new thiophosphinic acids
RICKELTON, W. A., & BOYLE, R. J. (1990) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299008918030 · Cited by 118 · cited 1×
“It has been reported that this reagent is significantly more resistant toward the decomposition by hydrolysis than its phosphoro analog.([7]) Several applications of this reagent in the extraction of various metals such as Cu(II), Cd(II), Ag(I), Ni(II), Zr(IV), Th(IV), Sc(III), and Pd(II) have been reported.”
BackgroundWu, D., Niu, C., Li, D., & Bai, Y. (2004) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2003.11.058 · Cited by 96 · cited 1×
“The extraction of the selected rare earths (Sc, Y, La, and Gd) from hydrochloric acid solutions have been investigated using CYANEX 302 in heptane as extractant.([10]) The results demonstrate that it is possible to separate the above rare earth ions(III) using CYANEX 302 as extractant by controlling the aqueous acidit…”
Method
Research works printed but not linked: 3
- Fucheng, H. 1996. The study of Separation of Copper and Zinc in Ammoniacal Solution by Solvent Extraction with LIX 84.Proceedings of International Solvent Extraction Conference (ISEC'96). March19–231996, Melbourne, Australia. Vol. 1, pp.727
- Chimenos, J. M., Fernandez, M. A., Segarra, M., Fernandez, A. I., Esparducer, A. and Espiell, F. 1999. Extraction of Copper contained in ammonia solutions from the Electronics Industry with LIX 84.Proceedings of International Solvent Extraction Conference (ISEC'99). March19–231999, Barcelona, Spain. pp.759
- Cote, G., Martin, J. V., Bauer, D. and Mottot, Y. 2002.Proceedings of International Solvent Extraction Conference (ISEC' 2002). March18–212002, Cape Town, South Africa. Vol. 1, pp.291
Cited by
Nguyen, V. N. H., Nguyen, T. H., & Lee, M. S. (2020) · Metals · doi:10.3390/met10081105 · Cited by 55
“8 Cu(II) complete 3–4 M HCl/HNO3: complete 4 M H2SO4: complete [26] 1 M Cyanex 272 Kerosene 4 M HCl; 100 mg/L Co(II) and 100 mg/L Ni(II); pH = 4 Co(II) over Ni(II) 93.”
BackgroundMethodInfluentialKahar, I. N. S., Othman, N., Noah, N. F. M., & Suliman, S. S. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-26951-0 · Cited by 33
El-Hefny, N. E. (2010) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2009.11.012 · Cited by 25
Self-citationAzizi, A., Nozhati, R. A., & Sillanpää, M. E. T. (2020) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-020-00271-w · Cited by 22
Sulaiman, R. N. R., Othman, N., Jusoh, N., Noah, N. F. M., Rashid, R., & Saufi, S. M. (2021) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2021.108581 · Cited by 19
A review on extraction and separation studies of copper with various commercial extractants
Pradhan, S., & Mishra, S. (2015) · Metallurgical Research & Technology · doi:10.1051/metal/2015005 · Cited by 20
Nozari, I., & Azizi, A. (2020) · Mining Metallurgy & Exploration · doi:10.1007/s42461-020-00280-z · Cited by 15
Solvent Extraction of Copper Using TBP, D2EHPA and MIBK
Irannajad, M., Afzali, Z., & Haghighi, H. K. (2018) · Russian Journal of Non-Ferrous Metals · doi:10.3103/s1067821218060068 · Cited by 12
Sulaiman, R. N. R., Noah, N. F. M., Othman, N., Jusoh, N., & Rosly, M. B. (2021) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-020-0702-3 · Cited by 12
Sun, P., Kim, T.-Y., Seo, H. J., & Cho, S. Y. (2021) · Metals · doi:10.3390/met11081300 · Cited by 12
Liquid-liquid extraction of copper (II) from chloride media by Cyanex 923 in kerosene
Devi, N., & Mishra, S. (2012) · Journal of the Southern African Institute of Mining and Metallurgy · Cited by 11
Separation of copper and iron from chloride media using Cyanex 921 in kerosene
Pradhan, S., Devi, N., & Mishra, S. (2014) · Journal of Central South University · doi:10.1007/s11771-014-2120-3 · Cited by 10
Theoretical Studies on Copper Extraction by means of Polymeric Membrane Contactors
Marjani, A., & Shirazian, S. (2012) · Oriental Journal Of Chemistry · doi:10.13005/ojc/280104 · Cited by 9
Youcef, M. H., Benabdallah, T., & Reffas, H. (2013) · Tenside Surfactants Detergents · doi:10.3139/113.110297 · Cited by 9
Solvent extraction and kinetic studies of copper from a heap leach liquor using CuPRO MEX-3302
Hosseinzadeh, M., Azizi, A., & Hassanzadeh, A. (2021) · Separation Science and Technology · doi:10.1080/01496395.2021.1922445 · Cited by 8
Cyanex 302: An extractant for Fe3+ from Chloride Medium
Ali, M., Biswas, R., Salam, S., Akhter, A., Karmakar, A., & Ullah, M. (1970) · Bangladesh Journal of Scientific and Industrial Research · doi:10.3329/bjsir.v46i4.9583 · Cited by 7
Zhang, Y., Tang, J., Liu, S., Hu, F., Liu, M., Jin, W., & Hu, J. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.116625 · Cited by 7
Youcef, M. H., Reffas, H., & Benabdallah, T. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106351 · Cited by 6
Synthesis and Antimicrobial Screening of the Metal Complexes with Cyanex 302
Alam, M. A., & Pal, T. K. (2009) · Journal of Scientific Research · doi:10.3329/jsr.v1i3.2259 · Cited by 5
Othman, N., Jusoh, N., Sulaiman, R. N. R., & Noah, N. F. M. (2022) · doi:10.1002/9781119852322.ch3 · Cited by 3
Photodegradation and by-products identification of commercial extractant Cyanex 302
Wieszczycka, K., & Zembrzuska, J. (2013) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1007/s10967-013-2849-4 · Cited by 2
“It has been proposed for the extraction of copper(II) from different aqueous solutions including sulphate, chloride and nitrate media [8, 9], lead from fly ash [10], cadmium(II) from phosphate industrial waste water [11], from chloride media [12] and to recovery of zinc(II) from rayon waste [13].”
BackgroundAbdelraheem, M. T. O., Ağaçayak, T., Aras, A., Taner, H. A., & Düzyol, S. (2025) · International Journal of Chemical Engineering · doi:10.1155/ijce/9454383 · Cited by 1
Ekstrahenty przemysłu hydrometalurgicznego
Mądrzak-Litwa, I., & Borowiak‐Resterna, A. (2016) · Technical Issues · Cited by 1
Noah, N. F. M., Othman, N., Kahar, I. N. S., Azhar, N. U. M., Suliman, S. S., & Idrus‐Saidi, S. A. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-024-09610-5
Abdelraheem, M. T. O., & Ağaçayak, T. (2024) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-024-03493-8
Metadata
- Authors
- El‐Hefny, N. E., & Daoud, J. A.
- Affiliations
- Egyptian Atomic Energy Authority (EG)
- Venue
- Solvent Extraction and Ion Exchange
- Publisher
- Informa UK Limited
- Published
- 2007-10
- Volume
- 25
- Issue
- 6
- Pages
- 831-843
- ISSN
- 0736-6299 (ISSN-L)
- 1532-2262
- OpenAlex
- W1978100674
- Cited by
- 25
- References
- 18
- Citations by year
- 2025: 1 · 2024: 2 · 2023: 1 · 2022: 1 · 2021: 5 · 2020: 4 · 2018: 1 · 2016: 1 · 2015: 1 · 2014: 1 · 2013: 2 · 2012: 2
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Solvent Extraction and Ion Exchange (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
- Physical Sciences › Chemistry › Inorganic Chemistry › Radioactive element chemistry and processing
- Keywords
- copper(II) extraction, Cyanex 302, kerosene, solvent extraction, chloride media, nitrate media, anion effects, extraction equilibrium, thermodynamic parameters, copper(I) reduction, copper stripping, nitric acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.