THE EXTRACTION OF SOME BASE METAL IONS BY CYANEX 30L CYANEX 302 AND THEIR BINARY EXTRACTANT MIXTURES WITH ALIQUAT 336
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The extraction behaviour of Cyanex 301, Cyanex 302 and their binary extractant mixtures with Aliquat 33b towards copper(II), zinc(II), iron(III), iron(II), cobalt(II), nickel(II) and manganese(Il) is indicated. The extraction data were collected from sulphate solutions with acidities ranging from pH 10 to 8 mol/dm3 sulphuric acid. Cyanex 301 is a more efficient extractant than Cyanex 302 and is able to effect extraction at greater acidities. In combination with the organic base Aliquat 336 the extraction power of these extractants is lowered and in some cases the extraction is suppressed appreciably. However, the suppression of extraction can be useful in metal separation and affords greater control over the back-extraction. The suppression is ascribed to the high stability of the acid-base couple which must dissociate in order to effect extraction.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Therefore, Cyanex 301 is monomeric in low polarity solvents due to the poor proton donor properties of the S-H group, whereas Cyanex 272 and Cyanex 302 exist as a dimer.”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [14]
In the citing paper
“Tait (1993) reported that sulfur is weaker than oxygen as a proton acceptor in the extraction [14].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [14]
In the citing paper
“Cyanex 272 reacts with Cu(II) to form a square planar mononuclear complex such as Cu(HA2)2, while the solvent extraction of Cu(II) by Cyanex 301 and Cyanex 302 is accompanied by a redox reaction in the organic phase: (i) reduction in Cu(II) to Cu(I) and (ii) the oxidation of extractants to disulfides (R-R) [14].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [14]
Citations
Cites
O,O'-Dialkyl Phosphorodithioic Acids as Extractants for Metals.
Handley, T. H., & Dean, J. A. (1962) · Analytical Chemistry · doi:10.1021/ac60190a034 · Cited by 84
New Process for Recovery of Zinc Sulfate and Sulfuric Acid from Zinc Electrowinning Bleed Solutions
Eyal, A. M., Baniel, A., Hajdu, K., et al. (1990) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.1990.11073609 · Cited by 16
Research works printed but not linked: 3
- A.I. Khol 'kin, V.V. Sergeev , G.L. Pashkov , L. Ya . Savkina, N.K. Kalish and A.M. Kopanev , Soviet Journal of Non-Ferrous Metals, , 28 , 18 .
- A.M. Eyal and A. Baniel , Solvent Extr. Ion Exch., , 2 ( 1984 ), 677.
- G. Cote and D. Bauer , Chem. Ind., , 22 , Nov. 1986 , 780.
Cited by
A review on hydrometallurgical extraction and recovery of cadmium from various resources
Sadegh Safarzadeh, M., Bafghi, M. S., Moradkhani, D., & Ojaghi Ilkhchi, M. (2007) · Minerals Engineering · doi:10.1016/j.mineng.2006.07.001 · Cited by 186
Manganese metallurgy review. Part II: Manganese separation and recovery from solution
Zhang, W., & Cheng, C. Y. (2007) · Hydrometallurgy · doi:10.1016/j.hydromet.2007.08.009 · Cited by 185
Solvent extraction of copper by Cyanex 272, Cyanex 302 and Cyanex 301
Sole, K. C., & Hiskey, J. B. (1995) · Hydrometallurgy · doi:10.1016/0304-386x(94)00023-v · Cited by 173
Review on solvent extraction of cadmium from various solutions
(2011) · doi:10.1016/j.hydromet.2011.09.001 · Cited by 121
Devi, N., Nathsarma, K. C., & Chakravortty, V. (2000) · Hydrometallurgy · doi:10.1016/s0304-386x(99)00054-7 · Cited by 113
Nayl, A. A., Hamed, M. M., & Rizk, S. E. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.04.006 · Cited by 108
Wang, L. Y., Guo, Q., & Lee, M. S. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.08.016 · Cited by 97
Comparative analysis of industrial processes for cadmium removal from phosphoric acid: A review
Kouzbour, S., Gourich, B., Gros, F., Vial, C., Allam, F., & Stiriba, Y. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.06.014 · Cited by 96
Extraction and recovery of cadmium using Cyanex 923
(2001) · doi:10.1016/s0304-386x(01)00157-8 · Cited by 83
AN ASSESSMENT OF THE LONG-TERM STABILITIES OF CYANEX302 AND CYANEX301 IN SULFURIC AND NITRIC ACIDS
Sole, K. C., Brent Hiskey, J., & Ferguson, T. L. (1993) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299308918186 · Cited by 75
SOLVENT EXTRACTION OF SILVER BY CYANEX 272, CYANEX 302 AND CYANEX 30
Sole, K. C., Ferguson, T. L., & Hiskey, J. B. (1994) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299408918252 · Cited by 70
A hydrochloric acid process for nickeliferous laterites
Rice, N. M. (2015) · Minerals Engineering · doi:10.1016/j.mineng.2015.09.017 · Cited by 70
Solvent extraction of cadmium (II) from acidic media by Cyanex 302
Almela, A., & Elizalde, M. P. (1995) · Hydrometallurgy · doi:10.1016/0304-386x(94)00012-r · Cited by 59
CYANEX® 301 binary extractant systems in cobalt/nickel recovery from acidic chloride solutions
Jakovljevic, B., Bourget, C., & Nucciarone, D. (2004) · Hydrometallurgy · doi:10.1016/j.hydromet.2004.06.006 · Cited by 58
Nguyen, V. N. H., Nguyen, T. H., & Lee, M. S. (2020) · Metals · doi:10.3390/met10081105 · Cited by 55
Supercritical Fluid Extraction of Metal Chelate: A Review
Ding, X., Liu, Q., Hou, X., & Fang, T. (2016) · Critical Reviews in Analytical Chemistry · doi:10.1080/10408347.2016.1225254 · Cited by 58
Deep, A., Malik, P., & Gupta, B. (2001) · Separation Science and Technology · doi:10.1081/ss-100102953 · Cited by 46
CYANEX® 301 binary extractant systems in cobalt/nickel recovery from acidic sulphate solutions
Bourget, C., Jakovljevic, B., & Nucciarone, D. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2004.12.005 · Cited by 46
Separation of copper from aqueous sulfate solutions by mixtures of Cyanex 301 and LIX® 984N
Fouad, E. A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.11.114 · Cited by 47
A Study on the Radiolytic Stability of Commercial and Purified Cyanex 301
Chen, J., Jiao, R., & Zhu, Y. (1996) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299608918356 · Cited by 45
González-Muñoz, M. P., Saucedo, I., Navarro, R., Ávila‐Rodríguez, M., & Guibal, E. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010071m · Cited by 41
Pośpiech, B. (2014) · Separation Science and Technology · doi:10.1080/01496395.2014.906456 · Cited by 39
Pośpiech, B. (2013) · doi:10.5277/ppmp130223 · Cited by 29
Jia, Q., Zhan, C., Li, D., & Niu, C. (2004) · Separation Science and Technology · doi:10.1081/ss-120028574 · Cited by 29
The extraction of some metal ions by LIX 1104 dissolved in toluene
Tait, B. K., Mdlalose, K. E., & Taljaard, I. (1995) · Hydrometallurgy · doi:10.1016/0304-386x(94)00041-z · Cited by 28
Self-citationBatchu, N. K., Sonu, C. H., & Lee, M. S. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.01.009 · Cited by 25
Batchu, N. K., Sonu, C. H., & Lee, M. S. (2013) · Hydrometallurgy · doi:10.1016/j.hydromet.2013.09.008 · Cited by 25
SYNERGISTIC EXTRACTION OF ZINC(II) BY MIXTURES OF PRIMARY AMINE N1923 AND CYANEX272
Jia, Q., Li, D., & Niu, C. (2002) · Solvent Extraction and Ion Exchange · doi:10.1081/sei-120016077 · Cited by 24
Azizi, A., Nozhati, R. A., & Sillanpää, M. E. T. (2020) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-020-00271-w · Cited by 22
Removal of Cadmium(II) Ions from Chloride Solutions by Cyanex 301 and Cyanex 302
Staszak, K., Wieszczycka, K., & Burmistrzak, P. (2011) · Separation Science and Technology · doi:10.1080/01496395.2011.563258 · Cited by 21
Advances in Heavy Metal Extraction Using Organophosphorus Compounds: A Comprehensive Review
Essakhraoui, M., Boukhair, A., Bentiss, F., Mazouz, H., Beniazza, R., & Haneklaus, N. H. (2025) · Metals · doi:10.3390/met15050524 · Cited by 24
Pashkov, G. L., Grigorieva, N. A., Pavlenko, N. I., Fleitlikh, I. Y., Nikiforova, L. K., & Pleshkov, M. A. (2008) · Solvent Extraction and Ion Exchange · doi:10.1080/07366290802495192 · Cited by 22
EXTRACTION OF COBALT(II) BY CYANEX 302
Menoyo, B., & Elizalde, M. P. (1997) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299708934468 · Cited by 22
Nguyen, T. T. N., Nguyen, V. N. H., Liu, Y., & Lee, M. S. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.113738 · Cited by 21
Fleitlikh, I. Y., Grigorieva, N. A., & Logutenko, O. A. (2018) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2017.1411034 · Cited by 19
Luo, F., Li, D. Q., & Wu, Y. (2004) · Solvent Extraction and Ion Exchange · doi:10.1081/sei-120028005 · Cited by 17
EXTRACTION OF COBALT(II) BY CYANEX
Menoyo, B., & Elizalde, M. P. (1997) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299708934494 · Cited by 16
Stripping of copper from CYANEX® 301 extract with thiourea–hydrazine–sodium hydroxide solution
Facon, S., Adekola, F. A., & Cote, G. (2007) · Hydrometallurgy · doi:10.1016/j.hydromet.2007.08.003 · Cited by 16
Xu, Z., Zhou, T., Zou, Q., Yang, F., Wang, Y., Wang, S.-C., & Wang, C.-H. (2022) · Hydrometallurgy · doi:10.1016/j.hydromet.2022.105822 · Cited by 20
Nozari, I., & Azizi, A. (2020) · Mining Metallurgy & Exploration · doi:10.1007/s42461-020-00280-z · Cited by 15
Grigorieva, N. A., & Fleitlikh, I. Y. (2013) · Hydrometallurgy · doi:10.1016/j.hydromet.2013.06.011 · Cited by 15
Solvent Extraction and Separation of Copper and Zinc from a Pickling Solution
Sinha, M. K., Sahu, S. K., Meshram, P., Pandey, B. D., & Kumar, V. (2012) · International Journal of Metallurgical Engineering · doi:10.5923/j.ijmee.20120102.04 · Cited by 14
Groenewold, G. S., Peterman, D. R., Klaehn, J. R., Delmau, L. H., Marc, P., & Custelcean, R. (2012) · Rapid Communications in Mass Spectrometry · doi:10.1002/rcm.6339 · Cited by 14
Nguyen, V.-N., Song, S.-J., & Lee, M. S. (2021) · Metals · doi:10.3390/met11081320 · Cited by 12
El-Hefny, N. E., Gasser, M. S., Rizk, S. E., Saad, E. A., & Daoud, J. A. (2010) · Solvent Extraction and Ion Exchange · doi:10.1080/07366290903558146 · Cited by 12
Aliquat 336@SiO2 ionogels: Synthesis of, and insight into, iron(III) extraction mechanisms
Kottsov, S. Y., Voshkin, A. A., Baranchikov, A. E., Fatyushina, E. V., Levina, A. V., Badulina, A. O., Arkhipenko, A. A., Nikiforova, M. E., & Ivanov, V. K. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.124354 · Cited by 10
Fleitlikh, I. Y., Pashkov, G. L., Grigorieva, N. A., Nikiforova, L. K., & Logutenko, O. A. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.08.010 · Cited by 8
Almela, A., Elizalde, M. P., & Menoyo, B. (1994) · Journal of Solution Chemistry · doi:10.1007/bf00972714 · Cited by 8
Application of ionic liquid based on Aliquat 336 and D2EHPA in the extraction of transition metals
Федорова, М. И., & Levina, A. V. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1212/1/012021 · Cited by 9
Recovery of Cr(III) from Tannery Spent Chrome Liquor for Reuse
Khwaja, A. R., Singh, R. J., & Tandon, S. N. (2000) · Journal of Environmental Engineering · doi:10.1061/(asce)0733-9372(2000)126:4(307 · Cited by 7
Grigorieva, N. A., & Fleitlikh, I. Y. (2015) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2014.993232 · Cited by 7
“[18−20] In particular, it was shown [18,19] that, when extracting cobalt, the addition of any amine negatively affects the efficiency of extraction.”
BackgroundAwwad, N. S., El‐Dessouky, S. I., Borai, E. H., & El-Sofany, E. A. (2009) · Solvent Extraction and Ion Exchange · doi:10.1080/07366290902821131 · Cited by 6
Ionic Liquids, an Asset in Extraction Techniques–a Comprehensive Review
Rajyaguru, Y. V., Patil, J. H., & Kusanur, R. A. (2022) · Reviews and Advances in Chemistry · doi:10.1134/s2634827622020040 · Cited by 6
Separation of Metals by Rotating Film Pertraction
(2002) · doi:10.1002/1521-4125(20020806)25:8 · Cited by 4
Fleitlikh, I. Y., Grigorieva, N. A., Nikiforova, L. K., Pavlenko, N. I., & Maksimov, N. G. (2017) · Separation Science and Technology · doi:10.1080/01496395.2017.1291682 · Cited by 4
Bessen, N. P., Bertelsen, E. R., & Shafer, J. C. (2021) · ACS Omega · doi:10.1021/acsomega.1c00254 · Cited by 3
Chagnes, A., & Forsberg, K. M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-40612-6.00019-5
Metadata
- Authors
- Tait, B. K.
- Affiliations
- Mintek (ZA)
- Corresponding author
- Tait, Brian K.
- Venue
- Solvent Extraction and Ion Exchange
- Publisher
- Informa UK Limited
- Published
- 1992-12
- Volume
- 10
- Issue
- 5
- Pages
- 799-809
- ISSN
- 0736-6299 (ISSN-L)
- 1532-2262
- OpenAlex
- W2031014479
- Semantic Scholar
- ba5372f3a45d64de1e707e8c58feacfa51c938ca
- Cited by
- 81
- References
- 2
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 2 · 2022: 5 · 2021: 3 · 2020: 5 · 2019: 1 · 2018: 1 · 2017: 3 · 2016: 5 · 2015: 3 · 2014: 4 · 2013: 5 · 2012: 2
- FWCI
- 6.52
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Solvent Extraction and Ion Exchange (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
- Physical Sciences › Chemistry › Inorganic Chemistry › Radioactive element chemistry and processing
- Keywords
- Cyanex 301, Cyanex 302, Aliquat 336, copper(II), zinc(II), iron(III), ferrous iron, cobalt(II), nickel(II), manganese(II), sulfate solutions, stripping, metal separation, acid-base stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.