The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
A review of the use of red mud as adsorbent for the removal of toxic pollutants from water and wastewater
Open accessAbstract
Red mud (an aluminium industry waste) has received wide attention as an effective adsorbent for water pollution control, showing significant adsorption potential for the removal of various aquatic pollutants. In this review, an extensive list of red-mud-based adsorbents has been compiled and their adsorption capacities (maximum uptake value of the adsorbent for the pollutant or adsorbate being removed) for various aquatic pollutants (metal ions, dyes, phenolic compounds, inorganic anions) are presented. The review provides a summary of recent information obtained using batch studies and deals with the adsorption mechanisms involved. It is evident from the literature survey that red mud has been found to be efficient for the removal of various aquatic pollutants, especially arsenic and phosphate. However, there is still a need to investigate the practical utility of these adsorbents on a commercial scale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Non-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
Bansal, R. C., & Goyal, M. (2005) · CRC Press eBooks · doi:10.1201/9781420028812 · Cited by 1,865
Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water
Mohan, D., & Pittman Jr., C. U. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.060 · Cited by 1,855
Bhatnagar, A., & Sillanpää, M. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.01.007 · Cited by 1,322
Self-citationComparison of different advanced oxidation processes for phenol degradation
Esplugas, S., Giménez, J., Contreras, S., Pascual, E., & Rodrı́guez, M. (2002) · Water Research · doi:10.1016/s0043-1354(01)00301-3 · Cited by 1,130
Adsorption of phenolic compounds on low-cost adsorbents: A review
Ahmaruzzaman, M. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2008.07.002 · Cited by 932
Removal of dyes from aqueous solution using fly ash and red mud
Wang, S., Boyjoo, Y., Choueib, A., & Zhu, Z. H. (2005) · Water Research · doi:10.1016/j.watres.2004.09.011 · Cited by 924 · cited 1×
“Heat treatment (800 °C for overnight) and chemical treatment (1 N HNO3 solution for 24 h) have also been applied to the as-received fly ash and red mud samples [83].”
MethodArsenic — a Review. Part I: Occurrence, Toxicity, Speciation, Mobility
Bissen, M., & Frimmel, F. H. (2003) · Acta hydrochimica et hydrobiologica · doi:10.1002/aheh.200390025 · Cited by 916
Gupta, V. K., Gupta, M., & Sharma, S. (2001) · Water Research · doi:10.1016/s0043-1354(00)00389-4 · Cited by 765
Cited by
Characteristics and adsorption capacities of low-cost sorbents for wastewater treatment: A review
De Gisi, S., Lofrano, G., Grassi, M., & Notarnicola, M. (2016) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2016.06.002 · Cited by 1,676
Low cost adsorbents for the removal of organic pollutants from wastewater
Ali, I., Asim, M., & Khan, T. A. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.08.028 · Cited by 1,498
Removal and Recovery of Phosphate From Water Using Sorption
Loganathan, P., Vigneswaran, S., Kandasamy, J., & Bolan, N. S. (2014) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2012.741311 · Cited by 678
The composition, recycling and utilisation of Bayer red mud
Khairul, M. A., Zanganeh, J., & Moghtaderi, B. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.11.006 · Cited by 667
Adsorption of heavy metal ions by various low-cost adsorbents: a review
Chakraborty, R., Asthana, A., Singh, A. K., Jain, B., & Susan, A. B. H. (2022) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067319.2020.1722811 · Cited by 659
Application of spinel ferrite nanoparticles in water and wastewater treatment: A review
Kefeni, K. K., Mamba, B. B., & Msagati, T. A. M. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.07.015 · Cited by 655
Binnemans, K., Jones, P. T., Blanpain, B., Van Gerven, T., & Pontikes, Y. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.089 · Cited by 625
Adsorption of Dyes Using Different Types of Clay: A Review
Adeyemo, A. A., Adeoye, I. O., & Bello, O. S. (2017) · Applied Water Science · doi:10.1007/s13201-015-0322-y · Cited by 609
Feasibility of industrial-scale treatment of dye wastewater via bio-adsorption technology
Li, W., Mu, B., & Yang, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.002 · Cited by 574
A review on agro-industrial waste (AIW) derived adsorbents for water and wastewater treatment
Mo, J., Yang, Q., Zhang, N., Zhang, W., Zheng, Y., & Zhang, Z. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.08.069 · Cited by 447
Synthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
Metallurgical process for valuable elements recovery from red mud—A review
Liu, Z., & Li, H. (2015) · Hydrometallurgy · doi:10.1016/j.hydromet.2015.03.018 · Cited by 344
Designer carbon nanotubes for contaminant removal in water and wastewater: A critical review
Sarkar, B., Mandal, S., Tsang, Y. F., Kumar, P., Kim, K.-H., & Ok, Y. S. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.08.132 · Cited by 314
Enhanced removal of nitrate from water using surface modification of adsorbents – A review
Loganathan, P., Vigneswaran, S., & Kandasamy, J. (2013) · Journal of Environmental Management · doi:10.1016/j.jenvman.2013.09.034 · Cited by 305
Khan, T. A., Chaudhry, S. A., & Ali, I. (2015) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2014.12.021 · Cited by 272
Phosphorus Removal from Wastewater: The Potential Use of Biochar and the Key Controlling Factors
Nobaharan, K., Bagheri Novair, S., Asgari Lajayer, B., & van Hullebusch, E. (2021) · Water · doi:10.3390/w13040517 · Cited by 126
Metadata
- Authors
- Bhatnagar, A., Vilar, V. J. P., Botelho, C. M. S., & Boaventura, R. A. R.
- Venue
- Environmental Technology
- Publisher
- Informa UK Limited
- Published
- 2011-02
- Volume
- 32
- Issue
- 3
- Pages
- 231-249
- ISSN
- 0959-3330 (ISSN-L)
- 1479-487X
- OpenAlex
- W1968251671
- Cited by
- 303
- References
- 72
- FWCI
- 23.90
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.