Prediction of Spur Gear Mechanical Power Losses Using a Transient Elastohydrodynamic Lubrication Model
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
A model to predict load-dependent (mechanical) power losses of spur gear pairs is proposed based on an elastohydrodynamic lubrication (EHL) model. The EHL model includes gear-specific time variations of all key contact parameters such as the rolling and sliding velocities, radii of curvature, and normal load such that a single continuous analysis of a tooth contact from its root to tip can be performed under any lubrication condition ranging from full-film to mixed EHL or boundary lubrication conditions. Predicted transient pressure and film thickness distributions are used to determine the instantaneous rolling and sliding shear within the lubricant, from which the gear mesh mechanical power losses are determined. Correction factors are introduced for the power losses to account for the thermal effects. The accuracy of the proposed model is assessed through comparisons to published spur gear efficiency experiments. The contribution of the rolling action to the total power loss is quantified to show that the rolling losses are indeed not negligible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The formulation was incorporated with a transient gear mixed EHL model to demonstrate that the rolling power loss is rather significant and should be modeled accurately in gear efficiency predictions.”
From A Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication (2011) · cites this paper as [1]
Citations
Cites
Johnson, K. L. (1985) · Cambridge University Press eBooks · doi:10.1017/cbo9781139171731 · Cited by 7,796
Fundamentals of Fluid Film Lubrication
Hamrock, B. J., Schmid, S. R., & Jacobson, B. O. (2004) · CRC Press eBooks · doi:10.1201/9780203021187 · Cited by 2,060
Elasto-Hydrodynamic Lubrication
(1977) · Elsevier eBooks · doi:10.1016/c2013-0-05764-7 · Cited by 591
A Full Numerical Solution to the Mixed Lubrication in Point Contacts
Hu, Y.-Z., & Zhu, D. (2000) · Journal of Tribology · doi:10.1115/1.555322 · Cited by 569
Applied Tribology: Bearing Design and Lubrication
Kennedy, F. E. (2002) · Journal of Tribology · doi:10.1115/1.1432665 · Cited by 325
Prediction of Mechanical Efficiency of Parallel-Axis Gear Pairs
Xu, H., Kahraman, A., Anderson, N. E., & Maddock, D. G. (2007) · Journal of Mechanical Design · doi:10.1115/1.2359478 · Cited by 323 · cited 1×
“( 3 ) provided a detailed review of these earlier gear efficiency studies, indicating that (a) the friction coefficient along the tooth surface is not constant but varies significantly, and (b) the empirical friction formulae are usually valid within narrow ranges that the experimental conditions and lubricants repres…”
BackgroundSelf-citationThe Rheological Properties of Elastohydrodynamic Lubricants
Evans, C. R., & Johnson, K. L. (1986) · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science · doi:10.1243/pime_proc_1986_200_134_02 · Cited by 243
An Experimental Investigation of Spur Gear Efficiency
Petry-Johnson, T. T., Kahraman, A., Anderson, N. E., & Chase, D. R. (2008) · Journal of Mechanical Design · doi:10.1115/1.2898876 · Cited by 205
Self-citationA Transient Mixed Elastohydrodynamic Lubrication Model for Spur Gear Pairs
Li, S., & Kahraman, A. (2010) · Journal of Tribology · doi:10.1115/1.4000270 · Cited by 186
Self-citationInteractions between nonlinear spur gear dynamics and surface wear
Ding, H., & Kahraman, A. (2007) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2007.06.030 · Cited by 182
Self-citationLoad-Independent Spin Power Losses of a Spur Gear Pair: Model Formulation
Seetharaman, S., & Kahraman, A. (2009) · Journal of Tribology · doi:10.1115/1.3085943 · Cited by 176
Self-citationOn lubricant transport conditions in elastohydrodynamic conjuctions
Ehret, P., Dowson, D., & Taylor, C. M. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0185 · Cited by 159
Oil Churning Power Losses of a Gear Pair: Experiments and Model Validation
Seetharaman, S., Kahraman, A., Moorhead, M. D., & Petry-Johnson, T. T. (2009) · Journal of Tribology · doi:10.1115/1.3085942 · Cited by 156
Self-citationOn some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubrication
Zhu, D. (2007) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet259 · Cited by 154
Journal of Engineering Tribology
(2005) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/135065010521900508 · Cited by 151
Conry, T. F., & Seireg, A. (1973) · Journal of Engineering for Industry · doi:10.1115/1.3438259 · Cited by 145
Viscoelastic Effects in MIL-L-7808-Type Lubricant, Part I: Analytical Formulation
Gupta, P. K., Cheng, H. S., Zhu, D., Forster, N. H., & Schrand, J. B. (1992) · Tribology Transactions · doi:10.1080/10402009208982117 · Cited by 142
Goglia, P. R., Conry, T. F., & Cusano, C. (1984) · Journal of Tribology · doi:10.1115/1.3260845 · Cited by 119
A Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears
Wu, S., & Cheng, H. S. (1991) · Tribology Transactions · doi:10.1080/10402009108982050 · Cited by 83 · cited 1×
“( 10 ) ; Wu and Cheng ( 20 ) ), the power loss due to the rolling action was conventionally computed by using an approximate rolling traction formula for line contacts (Goksem and Hargreaves ( 21 ) ): where the nondimensional parameters <inline-graphic xmlns:xlink="http://www.”
MethodHo¨glund, E., & Jacobson, B. (1986) · Journal of Tribology · doi:10.1115/1.3261267 · Cited by 75
Influence of Design Parameters on Mechanical Power Losses of Helical Gear Pairs
LI, S., VAIDYANATHAN, A., HARIANTO, J., & KAHRAMAN, A. (2009) · Journal of Advanced Mechanical Design, Systems, and Manufacturing · doi:10.1299/jamdsm.3.146 · Cited by 69
Self-citationA mixed EHL model with asymmetric integrated control volume discretization
Li, S., & Kahraman, A. (2009) · Tribology International · doi:10.1016/j.triboint.2009.03.020 · Cited by 69
Self-citationGoksem, P. G., & Hargreaves, R. A. (1978) · Journal of Lubrication Technology · doi:10.1115/1.3453183 · Cited by 58
Temperature Analysis in Lubricated Simple Sliding Rough Contacts
Lai, W. T., & Cheng, H. S. (1985) · A S L E Transactions · doi:10.1080/05698198508981625 · Cited by 47
Cioc, C., Cioc, S., Moraru, L., Kahraman, A., & Keith, T. G. (2002) · Tribology Transactions · doi:10.1080/10402000208982587 · Cited by 35
Self-citationShear strength of a fluid in the whole ranges of pressure and temperature
Zhang, Y. (2006) · Industrial Lubrication and Tribology · doi:10.1108/00368790610651495 · Cited by 7
Research works printed but not linked: 1
- Lai W. T., 1984, ASLE Transactions, 28, 302
Cited by
A review of vibration-based gear wear monitoring and prediction techniques
Feng, K., Ji, J. C., Ni, Q., & Beer, M. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109605 · Cited by 545
Prediction of mechanical gear mesh efficiency of hypoid gear pairs
Kolivand, M., Li, S., & Kahraman, A. (2010) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2010.06.015 · Cited by 117
Self-citationA Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication
LI, S., & KAHRAMAN, A. (2011) · Journal of Advanced Mechanical Design, Systems, and Manufacturing · doi:10.1299/jamdsm.5.252 · Cited by 45
Self-citationIm, D., Kim, T., Kim, B.-S., Park, J.-H., Kim, J.-G., & Park, Y.-J. (2025) · Tribology International · doi:10.1016/j.triboint.2025.110597 · Cited by 10
Deep learning prediction of EHL friction using full surface roughness profiles: An LSTM-MLP approach
Li, S. (2026) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2026.106417 · Cited by 1
Self-citation
Metadata
- Authors
- Li, S., & Kahraman, A.
- Affiliations
- The Ohio State University (US)
- Venue
- Tribology Transactions
- Publisher
- Informa UK Limited
- Published
- 2010-06-24
- Volume
- 53
- Issue
- 4
- Pages
- 554-563
- ISSN
- 1040-2004 (ISSN-L)
- 1547-397X
- OpenAlex
- W2099141668
- Cited by
- 149
- References
- 26
- Citations by year
- 2026: 10 · 2025: 12 · 2024: 13 · 2023: 7 · 2022: 12 · 2021: 8 · 2020: 17 · 2019: 5 · 2018: 9 · 2017: 11 · 2016: 7 · 2015: 9 · 2014: 8 · 2013: 8 · 2012: 7
- FWCI
- 12.78
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Tribology Transactions (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- spur gears, elastohydrodynamic lubrication, gear efficiency, film thickness distribution, pressure distribution, mixed lubrication, boundary lubrication, thermal effects, tooth contact
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.