The DOI matches its Crossref record; 100 of the 100 references it cites were found in a registry or an index.
A Review of Elasto-Hydrodynamic Lubrication Theory
Abstract
The development and understanding of elastohydrodynamic lubrication (EHL) can be traced back to the beginning of the previous century. However, it was not until 1949 that the first real solution of the problem was published. Since then, the technology has evolved enormously. In the current article a summary of these developments is given. Smooth surface EHL has become well established. Numerical methods, analytical solutions, and experimental techniques have become mature. Focus areas of research today are thermal EHL, starved EHL, friction (non-Newtonian lubricants), roughness, and grease. The scope of EHL is so wide that the authors needed select the topics of focus in this article. Therefore, in addition to the general overview of the areas of friction, analytical methods, starved EHL, and grease EHL are highlighted in this article.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Johnson, K. L. (1985) · Cambridge University Press eBooks · doi:10.1017/cbo9781139171731 · Cited by 7,796
Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates
Eyring, H. (1936) · The Journal of Chemical Physics · doi:10.1063/1.1749836 · Cited by 3,218
On the Contact of Elastic Solids
Hertz (1882) · Journal für die reine und angewandte Mathematik (Crelles Journal) · Cited by 3,051
Patir, N., & Cheng, H. S. (1978) · Journal of Lubrication Technology · doi:10.1115/1.3453103 · Cited by 2,305
Reynolds, O. (1886) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1886.0005 · Cited by 2,009
Proceedings of the Institution of Mechanical Engineers
(1987) · Computer-Aided Design · doi:10.1016/0010-4485(87)90099-6 · Cited by 1,329
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results
Hamrock, B. J., & Dowson, D. (1977) · Journal of Lubrication Technology · doi:10.1115/1.3453074 · Cited by 1,183
Dowson, D. (1979) · Medical Entomology and Zoology · Cited by 678
A numerical solution to the elasto-hydrodynamic problem
Dowson, D., & Higginson, G. R. (1959) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1959_001_004_02 · Cited by 663
Isothermals, isopiestics and isometrics relative to viscosity
Barus, C. (1893) · American Journal of Science · doi:10.2475/ajs.s3-45.266.87 · Cited by 662
Elasto-hydrodynamic lubrication : the fundamentals of roller and gear lubrication
Dowson, D., & Higginson, G. R. (1966) · Pergamon Press eBooks · Cited by 573
Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils
Roelands, C. J. A. (1966) · Research Repository (Delft University of Technology) · Cited by 565
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical Formulation
Hamrock, B. J., & Dowson, D. (1976) · Journal of Lubrication Technology · doi:10.1115/1.3452801 · Cited by 464
Multilevel matrix multiplication and fast solution of integral equations
Brandt, A., & Lubrecht, A. A. (1990) · Journal of Computational Physics · doi:10.1016/0021-9991(90)90171-v · Cited by 445
Multilevel solution of the EHL line and point contact problems
Venner, C. H. (2022) · doi:10.3990/1.9789090039749 · Cited by 390
Multilevel Methods in Lubrication
(2000) · Tribology Series · doi:10.1016/s0167-8922(00)x8001-7 · Cited by 368
Roelands, C. J. A., Winer, W. O., & Wright, W. A. (1971) · Journal of Lubrication Technology · doi:10.1115/1.3451519 · Cited by 314
Optical Analysis of Ball Bearing Starvation
Wedeven, L. D., Evans, D., & Cameron, A. (1971) · Journal of Lubrication Technology · doi:10.1115/1.3451591 · Cited by 309
Hamrock, B. J., & Dowson, D. (1978) · Journal of Lubrication Technology · doi:10.1115/1.3453152 · Cited by 307
Viscosity–temperature correlation for liquids
Seeton, C. J. (2006) · Tribology Letters · doi:10.1007/s11249-006-9071-2 · Cited by 280
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation Results
Hamrock, B. J., & Dowson, D. (1977) · Journal of Lubrication Technology · doi:10.1115/1.3452973 · Cited by 269
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II—Ellipticity Parameter Results
Hamrock, B. J., & Dowson, D. (1976) · Journal of Lubrication Technology · doi:10.1115/1.3452861 · Cited by 234
Chittenden, R. J., Dowson, D., Dunn, J. F., & Taylor, C. M. (1985) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1985.0014 · Cited by 230
An Analysis and Prediction of Lubricant Film Starvation in Rolling Contact Systems
Chiu, Y. P. (1974) · A S L E Transactions · doi:10.1080/05698197408981435 · Cited by 229
High Pressure Rheology for Quantitative Elastohydrodynamics
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-03927-7 · Cited by 222
Film Thickness in Starved EHL Point Contacts
Chevalier, F., Lubrecht, A. A., Cann, P. M. E., Colin, F., & Dalmaz, G. (1998) · Journal of Tribology · doi:10.1115/1.2834175 · Cited by 211
Film thickness in elastohydrodynamically lubricated elliptic contacts
Nijenbanning, G., Venner, C. H., & Moes, H. (1994) · Wear · doi:10.1016/0043-1648(94)90150-3 · Cited by 207
Multilevel Methods in Lubrication
Jacobson, B. (2001) · Tribology International · doi:10.1016/s0301-679x(01)00031-7 · Cited by 201
Optimum similarity analysis with applications to elastohydrodynamic lubrication
Moes, H. (1992) · Wear · doi:10.1016/0043-1648(92)90286-h · Cited by 185 · cited 1×
“4 , with the operating conditions given as Moes parameters ( 153 ) , ( 152 ) ; M and L .”
Yasutomi, S., Bair, S., & Winer, W. O. (1984) · Journal of Tribology · doi:10.1115/1.3260907 · Cited by 185
Cheng, H. S., & Sternlicht, B. (1965) · Journal of Basic Engineering · doi:10.1115/1.3650647 · Cited by 184
A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders
Cheng, H. S. (1965) · A S L E Transactions · doi:10.1080/05698196508972110 · Cited by 174
Spikes, H. A. (2006) · Lubrication Science · doi:10.1002/ls.23 · Cited by 171
Habchi, W., Vergne, P., Bair, S., Andersson, O., Eyheramendy, D., & Morales-Espejel, G. E. (2010) · Tribology International · doi:10.1016/j.triboint.2009.10.002 · Cited by 166
Self-citationOn lubricant transport conditions in elastohydrodynamic conjuctions
Ehret, P., Dowson, D., & Taylor, C. M. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0185 · Cited by 159
Lubrecht, A. A., ten Napel, W. E., & Bosma, R. (1986) · Journal of Tribology · doi:10.1115/1.3261260 · Cited by 156
Viscosity-Temperature Correlation for Liquids
Seeton, C. J. (2006) · doi:10.1115/ijtc2006-12139 · Cited by 153
A Full-System Approach of the Elastohydrodynamic Line/Point Contact Problem
Habchi, W., Eyheramendy, D., Vergne, P., & Morales-Espejel, G. E. (2008) · Journal of Tribology · doi:10.1115/1.2842246 · Cited by 150
Self-citationViscoelastic Effects in MIL-L-7808-Type Lubricant, Part I: Analytical Formulation
Gupta, P. K., Cheng, H. S., Zhu, D., Forster, N. H., & Schrand, J. B. (1992) · Tribology Transactions · doi:10.1080/10402009208982117 · Cited by 143
The Mapping of Elastohydrodynamic Contacts
Gohar, R., & Cameron, A. (1967) · A S L E Transactions · doi:10.1080/05698196708972181 · Cited by 139
Non-Newtonian Fluid Model Incorporated Into Elastohydrodynamic Lubrication of Rectangular Contacts
Jacobson, B. O., & Hamrock, B. J. (1984) · Journal of Tribology · doi:10.1115/1.3260901 · Cited by 139
The Behaviour of Transverse Roughness in EHL Contacts
Greenwood, J. A., & Morales-Espejel, G. E. (1994) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/pime_proc_1994_208_359_02 · Cited by 136
Self-citationContact dynamics in the field of elastohydrodynamic Lubrication
Wijnant, Y. H. (1998) · doi:10.3990/1.9789036512237 · Cited by 134
Crook, A. W. (1961) · Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences · doi:10.1098/rsta.1961.0016 · Cited by 129
Habchi, W., Eyheramendy, D., Bair, S. S., Vergne, P., & Morales-Espejel, G. E. (2008) · Tribology Letters · doi:10.1007/s11249-008-9310-9 · Cited by 123
Self-citationEffects of Surface Roughness on Point Contact EHL
Kaneta, M., Sakai, T., & Nishikawa, H. (1993) · Tribology Transactions · doi:10.1080/10402009308983201 · Cited by 121
The effect of surface texturing on thin EHD lubrication films
Křupka, I., & Hartl, M. (2006) · Tribology International · doi:10.1016/j.triboint.2006.10.007 · Cited by 115
Past, present and future studies in elastohydrodynamics
Dowson, D., & Ehret, P. (1999) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/1350650991542703 · Cited by 112
The Influence of Fluid Rheology on the Performance of Traction Drives
Tevaarwerk, J. L., & Johnson, K. L. (1979) · Journal of Lubrication Technology · doi:10.1115/1.3453346 · Cited by 109
Numerical Analysis of the Influence of Waviness on the Film Thickness of a Circular EHL Contact
Venner, C. H., & Lubrecht, A. A. (1996) · Journal of Tribology · doi:10.1115/1.2837071 · Cited by 108
Thermal elastohydrodynamic analysis of circular contacts Part 1: Newtonian model
Kim, H. J., Ehret, P., Dowson, D., & Taylor, C. M. (2001) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/1350650011543583 · Cited by 108
Non-Newtonian Thermal Analyses of Point EHL Contacts Using the Eyring Model
Liu, X., Jiang, M., Yang, P., & Kaneta, M. (2005) · Journal of Tribology · doi:10.1115/1.1843161 · Cited by 99
The behaviour of transverse roughness in sliding elastohydrodynamically lubricated contacts
Greenwood, J. A., & Johnson, K. L. (1992) · Wear · doi:10.1016/0043-1648(92)90264-9 · Cited by 97
CFD Modeling of a Thermal and Shear-Thinning Elastohydrodynamic Line Contact
Hartinger, M., Dumont, M.-L., Ioannides, S., Gosman, D., & Spikes, H. A. (2008) · Journal of Tribology · doi:10.1115/1.2958077 · Cited by 93
Thermal Analysis of Elastohydrodynamic Lubrication of Line Contacts Using the Ree-Eyring Fluid Model
Wang, S., Cusano, C., & Conry, T. F. (1991) · Journal of Tribology · doi:10.1115/1.2920611 · Cited by 88
Thermal elastohydrodynamic analysis of circular contacts Part 2: Non-Newtonian model
Kim, H. J., Ehret, P., Dowson, D., & Taylor, C. M. (2001) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/1350650011543592 · Cited by 87
Inlet Shear Heating in Elastohydrodynamic Lubrication
Greenwood, J. A., & Kauzlarich, J. J. (1973) · Journal of Lubrication Technology · doi:10.1115/1.3451844 · Cited by 83
The elastohydrodynamic lubrication of point contacts at heavy loads
Evans, H. P., & Snidle, R. W. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0096 · Cited by 79
Evans, H. P., & Snidle, R. W. (1981) · Journal of Lubrication Technology · doi:10.1115/1.3251733 · Cited by 77
Advanced Multilevel Solution of the EHL Line Contact Problem
Venner, C. H., ten Napel, W. E., & Bosma, R. (1990) · Journal of Tribology · doi:10.1115/1.2920277 · Cited by 77
Lubricant Replenishment in Rolling Bearing Contacts
Gershuni, L., Larson, M. G., & Lugt, P. M. (2008) · Tribology Transactions · doi:10.1080/10402000802192529 · Cited by 76
Self-citationGuo, F., Yang, P., & Qu, S. (2000) · Journal of Tribology · doi:10.1115/1.1330739 · Cited by 75
Measurement of Lubrication Condition in Rolling Element Bearings
Heemskerk, R. S., Vermeiren, K. N., & Dolfsma, H. (1982) · A S L E Transactions · doi:10.1080/05698198208983121 · Cited by 74
Evaluation of deflection in semi-infinite bodies by a differential method
Evans, H. P., & Hughes, T. G. (2000) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/0954406001523911 · Cited by 71
Three-Dimensional Temperature Distribution in EHD Lubrication: Part I—Circular Contact
Kim, K. H., & Sadeghi, F. (1992) · Journal of Tribology · doi:10.1115/1.2920864 · Cited by 70
Amplitude Reduction of Non-Isotropic Harmonic Patterns in Circular EHL Contacts, under Pure Rolling
Venner, C. H., & Lubrecht, A. A. (1999) · Tribology series · doi:10.1016/s0167-8922(99)80037-6 · Cited by 69
A contribution to the numerical analysis of isothermal elastohydrodynamic lubrication
Okamura, H. (1993) · Tribology of Reciprocating Engines · doi:10.1016/b978-0-408-22161-0.50048-2 · Cited by 64 · cited 1×
“In 1982 the Newton-Raphson method was introduced (Okamura ( 90 ) ) to gain computing speed.”
A finite element approach of thin film lubrication in circular EHD contacts
Habchi, W., Demirci, I., Eyheramendy, D., Morales-Espejel, G. E., & Vergne, P. (2007) · Tribology International · doi:10.1016/j.triboint.2007.01.017 · Cited by 62
Self-citationAn extension of the Grubin theory of elastohydrodynamic lubrication
Greenwood, J. A. (1972) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/5/12/309 · Cited by 59
Surface Feature Effects in Starved Circular EHL Contacts
Dumont, M.-L., Lugt, P. M., & Tripp, J. H. (2001) · Journal of Tribology · doi:10.1115/1.1403457 · Cited by 56
Self-citationOptical Interferometric Observations of the Effects of a Moving Dent on Point Contact EHL
Kaneta, M., Kanada, T., & Nishikawa, H. (1997) · Tribology series · doi:10.1016/s0167-8922(08)70437-1 · Cited by 54
Tribology and Interface Engineering Series
(2006) · Tribology & interface engineering/Tribology and interface engineering · doi:10.1016/s0167-8922(06)80504-3 · Cited by 52
Thermal and Non-Newtonian Numerical Analyses for Starved EHL Line Contacts
Yang, P., Wang, J., & Kaneta, M. (2005) · Journal of Tribology · doi:10.1115/1.2164465 · Cited by 47
Venner, C. H., & ten Napel, W. E. (1992) · Wear · doi:10.1016/0043-1648(92)90132-r · Cited by 47
A Generalized Traction Curve for EHL Contacts
Jacod, B. C., Venner, C. H., & Lugt, P. M. (2000) · Journal of Tribology · doi:10.1115/1.1308021 · Cited by 46
Self-citationLugt, P. M., Severt, R. W. M., Fogelströ, J., & Tripp, J. H. (2001) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/1350650011543772 · Cited by 45
Self-citationEffects of Surface Micro-Geometry On the Lift-Off Speed of an EHL Contact
Masen, M. A., Venner, C. H., Lugt, P. M., & Tripp, J. H. (2002) · Tribology Transactions · doi:10.1080/10402000208982517 · Cited by 42
Self-citationWaviness Deformation in Starved EHL Circular Contacts
Venner, C. H., Berger, G., & Lugt, P. M. (2004) · Journal of Tribology · doi:10.1115/1.1572514 · Cited by 42
Self-citationVenner, C. H., & ten Napel, W. E. (1992) · Wear · doi:10.1016/0043-1648(92)90133-s · Cited by 41
Ertel—Grubin methods in elastohydrodynamic lubrication – a review
Morales-Espejel, G. E., & Wemekamp, A. W. (2008) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet325 · Cited by 40
Self-citationMorales-Espejel, G. E., Lugt, P. M., van Kuilenburg, J., & Tripp, J. H. (2003) · Tribology Transactions · doi:10.1080/10402000308982625 · Cited by 38
Self-citationThe Variation of Viscosity With Temperature and Pressure for Various Real Lubricants
Bair, S. S. (2000) · Journal of Tribology · doi:10.1115/1.1308024 · Cited by 35
New tools for the experimental study of EDH and limit lubrications
Molimard, J., Querry, M., & Vergne, P. (1999) · Tribology series · doi:10.1016/s0167-8922(99)80090-x · Cited by 33
Isothermal Elastohydrodynamic Theory for the Full Range of Pressure-Viscosity Coefficient
Cheng, H. S. (1972) · Journal of Lubrication Technology · doi:10.1115/1.3451632 · Cited by 31
Morales-Espejel, G. E. (2008) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/09544062jmes1017 · Cited by 30
Self-citationOptimization of control strategy for a single-shaft parallel hybrid electric vehicle
Oh, K., Min, J., Choi, D., & Kim, H. (2007) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1243/09544070jauto93 · Cited by 30
The Effects of a Stationary Surface Pocket on EHL Line Contact Start-Up
Zhao, J., & Sadeghi, F. (2004) · Journal of Tribology · doi:10.1115/1.1759342 · Cited by 28
Extension of the Friction Mastercurve to Limiting Shear Stress Models
Jacod, B. C., Venner, C. H., & Lugt, P. M. (2003) · Journal of Tribology · doi:10.1115/1.1572513 · Cited by 27
Self-citationComputational chemistry study on the dynamics of lubricant molecules under shear conditions
Kamei, D., Zhou, H., Suzuki, K., Konno, K., Takami, S., Kubo, M., & Miyamoto, A. (2003) · Tribology International · doi:10.1016/s0301-679x(02)00201-3 · Cited by 26
Elastohydrodynamic Film Thickness in Elliptical Contacts With Spinning and Rolling
Zou, Q., Changhua, H., & Wen, S. (1999) · Journal of Tribology · doi:10.1115/1.2834124 · Cited by 26
Frictional traction in elastohydrodynamic lubrication
Adams, D. R., & Hirst, W. (1973) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1973.0039 · Cited by 26
Waviness Orientation in EHL Point Contact
Ehret, P., Dowson, D., & Taylor, C. M. (1996) · Tribology series · doi:10.1016/s0167-8922(08)70787-9 · Cited by 25
Thin layer flow in rolling element bearings
Zoelen, V. M. T. (2009) · doi:10.3990/1.9789036529341 · Cited by 24
Dormois, H., Fillot, N., Vergne, P., Dalmaz, G., Querry, M., Ιωαννίδης, Ε., & Morales-Espejel, G. E. (2009) · Tribology Transactions · doi:10.1080/10402000802105448 · Cited by 18
Self-citationQuiñonez, A. F., & Morales-Espejel, G. E. (2010) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/09544062jmes1966 · Cited by 17
Self-citationExperimental Evaluation of EHD Film Shape and Its Comparison With Numerical Solution
Křupka, I., Hartl, M., Poliščuk, R., K., J., & Lisˇka, M. (2000) · Journal of Tribology · doi:10.1115/1.1288772 · Cited by 17
The Influence of Spinning on the Performance of EHL in Elliptical Contacts
Yang, P., & Cui, J. (2006) · Springer eBooks · doi:10.1007/1-4020-4533-6_6 · Cited by 16
Greenwood, J. A., & Morales-Espejel, G. E. (1995) · Tribology series · doi:10.1016/s0167-8922(08)70660-6 · Cited by 8
Self-citationThe future of engineering tribology in concentrated contacts
Evans, H. P., & Snidle, R. W. (2009) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/09544062jmes1672 · Cited by 7
Vergne, P., & Ville, F. (2006) · Springer eBooks · doi:10.1007/1-4020-4533-6_14 · Cited by 3
Cited by
Wolf, M., Solovyev, S., & Arshia, F. (2022) · Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · doi:10.1177/13506501211047756 · Cited by 6
Traction in EHL-Contacts : the influence of local fluid rheology and temperatures
Bader, N. F. (2018) · Hannover : Institutionelles Repositorium der Leibniz Universität Hannover · doi:10.15488/4459 · Cited by 6
Metadata
- Authors
- Lugt, P. M., & Morales-Espejel, G. E.
- Venue
- Tribology Transactions
- Publisher
- Informa UK Limited
- Published
- 2011-03-31
- Volume
- 54
- Issue
- 3
- Pages
- 470-496
- ISSN
- 1040-2004 (ISSN-L)
- 1547-397X
- OpenAlex
- W2024746687
- Cited by
- 260
- References
- 100
- FWCI
- 16.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.