CoChat

Comparative studies of CO2 capture using acid and base modified activated carbon from sugarcane bagasse

Alhassan, Mohammed, Andrew, Iwodi, Auta, Manase, Umaru, Musa, Garba, Mohammed Umar, Isah, Abubakar G., Alhassan, Bello · 2018 · Biofuels

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.

Abstract

This study reports the potential of acid and base modified sugarcane bagasse activated carbon for carbon dioxide (CO2) adsorption. The rate of CO2 adsorption by the unmodified (UMAC), acid (AMAC) and base modified activated carbon (BMAC) was determined gravimetrically via weight differential measurement. Surface morphology and functional group of the adsorbent before and after adsorption were also determined. The adsorbents performance was evaluated using a cylindrical glass column equipped with a digital weighing balance. Characterization of adsorbents showed that BMAC had a better pore structure thereby making it the most effective adsorbent for CO2. CO2 adsorption increased over time in the order UMAC < AMAC < BMAC. The highest amount (148.5 mg.g−1) of CO2 was adsorbed at 25°C and 25 min. The adsorption kinetics followed second-order kinetics with a regression coefficient (R2) of 0.9967. The activation energy (Ea) of the process was evaluated to be 5.77, 13.02 and 13.55 kJ.mol−1 for BMAC, AMAC and UMAC respectively. The low Ea observed suggests that CO2 is weakly bonded to the adsorbent surface. The acid and base modified sugarcane bagasse activated carbon produced is characterized with enhanced capacity for CO2 adsorption.

Overview

Integrity signals

Registry

Crossref · 10.1080/17597269.2017.1306680

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 28 references

Research works printed but not linked: 12

  1. Qiao H, 2004, Third Annual Conference on Carbon Capture & Sequestration
  2. Rashidi NA, 2013, Chem Eng Trans, 35, 361
  3. Alhassan M, 2013, In J Al Sci Eng Invest, 2, 2251
  4. Ho YS, 2000, Separ Purif Rev, 29, 180
  5. Sultana MS, International conference on Mechanical and Material Engineering (ICMIME2013), 508
  6. Devnarain PB, 2002, Proc S Afr Sug Technol Ass, 76, 477
  7. Smit B, 2015, Office of Basic Energy Sciences Energy Frontier Research Center, 1
  8. Rashidi NA, 2014, Int J Chem Eng Appl, 4, 91
  9. Qureshi K, 2008, Inte J Nat Sci Eng, 1, 145
  10. Wu J, 2004, Thesis
  11. Coates J, 2000, Encyclopedia of analytical chemistry, 1
  12. Govindarajan D, 2011, Achieve Phys Res, 2, 38

Cited by

See all 51

Metadata

Authors
Alhassan, M., Andrew, I., Auta, M., Umaru, M., Garba, M. U., Isah, A. G., & Alhassan, B.
Affiliations
  • Federal University of Technology Minna (NG)
  • Kwara State Polytechnic (NG)
Corresponding author
Alhassan, Mohammed
Venue
Biofuels
Published
2017-04-10
Volume
9
Issue
6
Pages
719-728
ISSN
  • 1759-7269 (ISSN-L)
  • 1759-7277
OpenAlex
W2606637197
Cited by
51
References
28
Citations by year
2026: 3 · 2025: 10 · 2024: 6 · 2023: 7 · 2022: 10 · 2021: 8 · 2019: 1 · 2018: 6
FWCI
1.49
Type
journal article
Language
en
Open access
closed
Locations
Biofuels (publishedVersion)
Topics
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
Keywords
CO2 capture, CO2 adsorption, sugarcane bagasse, activated carbon, acid modification, base modification, biomass-derived adsorbents, adsorption kinetics, second-order kinetics, activation energy, pore structure, surface functional groups

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Comparative studies of CO2 capture using acid and base modified activated carbon from sugarcane bagasse. https://app.cochat.ai/papers/10.1080/17597269.2017.1306680
The paper
Alhassan, M., Andrew, I., Auta, M., Umaru, M., Garba, M. U., Isah, A. G., & Alhassan, B. (2018). Comparative studies of CO2 capture using acid and base modified activated carbon from sugarcane bagasse. Biofuels. https://doi.org/10.1080/17597269.2017.1306680

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.