Recent developments and consideration issues in solid adsorbents for CO2 capture from flue gas

Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources

Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,602 · see citing works

Construction of Crystalline 2D Covalent Organic Frameworks with Remarkable Chemical (Acid/Base) Stability via a Combined Reversible and Irreversible Route

Kandambeth, S., Mallick, A., Lukose, B., Mane, M. V., Heine, T., & Banerjee, R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308278w · Cited by 2,174 · see citing works

Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks

Li, J., Ma, Y., McCarthy, M. C., Sculley, J. P., Yu, J., Jeong, H., Balbuena, P. B., & Zhou, H.-C. “. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,023 · see citing works

CO2 capture by solid adsorbents and their applications: current status and new trends

Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611 · see citing works

The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion

Trickett, C. A., Helal, A., Al‐Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,534 · see citing works

Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review

Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199 · see citing works

Recent advances in solid sorbents for CO 2 capture and new development trends

Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D. M., & Zhong, Z. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01647e · Cited by 1,178 · see citing works

Covalent Organic Frameworks for CO 2 Capture

Zeng, Y., Zou, R., & Zhao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505004 · Cited by 1,144 · see citing works

Novel Polyethylenimine-Modified Mesoporous Molecular Sieve of MCM-41 Type as High-Capacity Adsorbent for CO 2 Capture

Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,099 · see citing works

Screening of Metal−Organic Frameworks for Carbon Dioxide Capture from Flue Gas Using a Combined Experimental and Modeling Approach

Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 908 · see citing works

Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions

Xiang, S., He, Y., Zhang, Z., Wu, H., Zhou, W., Krishna, R., & Chen, B. (2012) · Nature Communications · doi:10.1038/ncomms1956 · Cited by 878 · see citing works

The new age of MOFs and of their porous-related solids

Maurin, G., Serre, C., Cooper, A. I., & Férey, G. (2017) · Chemical Society Reviews · doi:10.1039/c7cs90049j · Cited by 779 · see citing works

Preparation and characterization of novel CO2 “molecular basket” adsorbents based on polymer-modified mesoporous molecular sieve MCM-41

Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769 · see citing works

Designing Adsorbents for CO 2 Capture from Flue Gas-Hyperbranched Aminosilicas Capable of Capturing CO 2 Reversibly

Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 759 · see citing works

Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations – A review

Mansour, R. B., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A. M. P., Laoui, T., & Ali, M. A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 721 · see citing works

A review on solid adsorbents for carbon dioxide capture

Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707 · see citing works

A search for selectivity to enable CO 2 capture with porous adsorbents

Oschatz, M., & Antonietti, M. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 614 · see citing works

Carbon-Based Adsorbents for Postcombustion CO ₂ Capture: A Critical Review

Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598 · see citing works

Sulfonate-Grafted Porous Polymer Networks for Preferential CO2 Adsorption at Low Pressure

Lu, W., Yuan, D., Sculley, J. P., Zhao, D., Krishna, R., & Zhou, H.-C. “. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2087773 · Cited by 572 · see citing works

A Fine-Tuned Fluorinated MOF Addresses the Needs for Trace CO 2 Removal and Air Capture Using Physisorption

Bhatt, P. M., Belmabkhout, Y., Cadiau, A., Adil, K., Shekhah, O., Shkurenko, A., Barbour, L. J., & Eddaoudi, M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05345 · Cited by 558 · see citing works

A perfluorinated covalent triazine-based framework for highly selective and water–tolerant CO2 capture

Zhao, Y., Yao, K., Teng, B., Zhang, T., & Han, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42548g · Cited by 526 · see citing works

Hierarchical N-Doped Carbon as CO2 Adsorbent with High CO2 Selectivity from Rationally Designed Polypyrrole Precursor

To, J. W. F., He, J., Mei, J., Haghpanah, R., Chen, Z., Kurosawa, T., Chen, S., Bae, W., Pan, L., Tok, J. B. ‐., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11955 · Cited by 474 · see citing works

A critical review on preparation, characterization and utilization of sludge-derived activated carbons for wastewater treatment

Hadi, P., Xu, M., Ning, C., Lin, C. S. K., & McKay, G. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.088 · Cited by 421 · see citing works

Infrared Study of CO2 Sorption over “Molecular Basket” Sorbent Consisting of Polyethylenimine-Modified Mesoporous Molecular Sieve

Wang, X., Schwartz, V., Clark, J. C., Ma, X., Overbury, S. H., Xu, X., & Song, C. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809946y · Cited by 390 · see citing works

The development supercapacitor from activated carbon by electroless plating—A review

Faraji, S., & Ani, F. N. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.068 · Cited by 384 · see citing works

Influence of Moisture on CO2 Separation from Gas Mixture by a Nanoporous Adsorbent Based on Polyethylenimine-Modified Molecular Sieve MCM-41

Xu, X., Song, C., Miller, B. G., & Scaroni, A. W. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050382n · Cited by 380 · see citing works

Last chance for carbon capture and storage

Scott, V., Gilfillan, S., Markusson, N. O., Chalmers, H., & Haszeldine, R. S. (2012) · Nature Climate Change · doi:10.1038/nclimate1695 · Cited by 378 · see citing works

Imine-Linked Porous Polymer Frameworks with High Small Gas (H 2 , CO 2 , CH 4 , C 2 H 2 ) Uptake and CO 2 /N 2 Selectivity

Zhu, Y., Long, H., & Zhang, W. (2013) · Chemistry of Materials · doi:10.1021/cm400019f · Cited by 367 · see citing works

Low concentration CO2 capture using physical adsorbents: Are metal–organic frameworks becoming the new benchmark materials?

Belmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 359 · see citing works

Epoxide-functionalization of polyethyleneimine for synthesis of stable carbon dioxide adsorbent in temperature swing adsorption

Choi, W., Min, K., Kim, C., Ko, Y. S., Jeon, J., Seo, H., Park, Y., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms12640 · Cited by 342 · see citing works

Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture

Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 323 · see citing works

Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity

Alabadi, A., Razzaque, S., Yang, Y., Chen, S., & Tan, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.032 · Cited by 322 · see citing works

Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review

Liu, W., An, H., Qin, C., Yin, J., Wang, G., Feng, B., & Xu, M. (2012) · Energy & Fuels · doi:10.1021/ef300220x · Cited by 320 · see citing works

Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture

González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280 · see citing works

CO2 absorption and regeneration of alkali metal-based solid sorbents

Lee, S. C., Choi, B. Y., Lee, T. J., et al. (2005) · Catalysis Today · doi:10.1016/j.cattod.2005.10.051 · Cited by 280 · see citing works

CO 2 capture from humid flue gases and humid atmosphere using a microporous coppersilicate

Datta, S. J., Khumnoon, C., Lee, Z. H., Moon, W. K., Docao, S., Nguyen, T. H., Hwang, I. C., Moon, D., Oleynikov, P., Terasaki, O., et al. (2015) · Science · doi:10.1126/science.aab1680 · Cited by 280 · see citing works

Change of CO2Carrying Capacity of CaO in Isothermal Recarbonation−Decomposition Cycles

Lysikov, A. I., Salanov, A. N., & Okunev, A. G. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0702328 · Cited by 278 · see citing works

Determination of intrinsic rate constants of the CaO–CO2 reaction

Sun, P., Grace, J. R., Lim, C. J., & Anthony, E. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.08.055 · Cited by 261 · see citing works

Amine-Impregnated Mesoporous Silica Nanotube as an Emerging Nanocomposite for CO2 Capture

Niu, M., Yang, H., Zhang, X., Wang, Y., & Tang, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05044 · Cited by 258 · see citing works

Removal of Cd(II), Cr(VI), Fe(III) and Ni(II) from aqueous solutions by an E. coli biofilm supported on kaolin

Quintelas, C., Rocha, Z., Silva, B., Fonseca, B., Figueiredo, H., & Tavares, T. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.11.025 · Cited by 252 · see citing works

CO2 removal from natural gas by employing amine absorption and membrane technology—A technical and economical analysis

Peters, L., Hussain, A., Follmann, M., Melin, T., & Hägg, M. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.007 · Cited by 250 · see citing works

Product Layer Diffusion during the Reaction of Calcium Oxide with Carbon Dioxide

Mess, D., Sarofim, A. F., & Longwell, J. P. (1999) · Energy & Fuels · doi:10.1021/ef980266f · Cited by 237 · see citing works

Development of Regenerable MgO-Based Sorbent Promoted with K 2 CO 3 for CO 2 Capture at Low Temperatures

Lee, S. C., Chae, H. J., Lee, S. J., Choi, B. Y., Yi, C. K., Lee, J. B., Ryu, C. K., & Kim, J. C. (2008) · Environmental Science & Technology · doi:10.1021/es702693c · Cited by 220 · see citing works

Polyethyleneimine–nano silica composites: a low-cost and promising adsorbent for CO 2 capture

Li, K., Jiang, J., Tian, S., Yan, F., & Chen, X. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04275a · Cited by 207 · see citing works

Adsorption of CO 2 from dry gases on MCM-41 silica at ambient temperature and high pressure. 1: Pure CO 2 adsorption

Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.03.017 · Cited by 203 · see citing works

Coconut shell-based microporous carbons for CO2 capture

Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.07.008 · Cited by 198 · see citing works

Limestone Calcination Nearby Equilibrium: Kinetics, CaO Crystal Structure, Sintering and Reactivity

Valverde, J. M., Sánchez-Jiménez, P. E., & Pérez-Maqueda, L. A. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp508745u · Cited by 191 · see citing works

Oxygen vacancy-rich mesoporous silica KCC-1 for CO2 methanation

Hamid, M. Y. S., Firmansyah, M. L., Triwahyono, S., et al. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.12.023 · Cited by 184 · see citing works

CO2 Capture in the Sustainable Wheat-Derived Activated Microporous Carbon Compartments

Hong, S. M., Jang, E., Dysart, A. D., Pol, V. G., & Lee, K. B. (2016) · Scientific Reports · doi:10.1038/srep34590 · Cited by 177 · see citing works

Carbons with narrow pore size distribution prepared by simultaneous carbonization and self-activation of tobacco stems and their application to supercapacitors

Kleszyk, P. M., Ratajczak, P., Skowron, P., Jagiełło, J., Abbas, Q., Frąckowiak, E., & Béguin, F. (2014) · Carbon · doi:10.1016/j.carbon.2014.09.043 · Cited by 172 · see citing works

[3+3] Imine and β-ketoenamine tethered fluorescent covalent-organic frameworks for CO 2 uptake and nitroaromatic sensing

Kaleeswaran, D., Vishnoi, P., & Murugavel, R. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc00670h · Cited by 170 · see citing works

Stability of Supported Amine Adsorbents to SO2 and NOx in Postcombustion CO2 Capture. 1. Single-Component Adsorption

Rezaei, F., & Jones, C. W. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4019116 · Cited by 168 · see citing works

Breakthrough adsorption study of a commercial activated carbon for pre-combustion CO2 capture

García, S., Gil, M. V., Martín, C. F., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.027 · Cited by 167 · see citing works

Ultrafast room temperature synthesis of GrO@HKUST-1 composites with high CO2 adsorption capacity and CO2/N2 adsorption selectivity

Xu, F., Yu, Y., Yan, J., et al. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.05.143 · Cited by 166 · see citing works

Important Roles of Enthalpic and Entropic Contributions to CO 2 Capture from Simulated Flue Gas and Ambient Air Using Mesoporous Silica Grafted Amines

Alkhabbaz, M. A., Bollini, P., Foo, G. S., Sievers, C., & Jones, C. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja507655x · Cited by 165 · see citing works

Recent advances in functionalized composite solid materials for carbon dioxide capture

Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2017) · Energy · doi:10.1016/j.energy.2017.02.053 · Cited by 165 · see citing works

Application of zeolites in aquaculture industry: a review

Ghasemi, Z., Sourinejad, I., Kazemian, H., & Rohani, S. (2016) · Reviews in Aquaculture · doi:10.1111/raq.12148 · Cited by 164 · see citing works

Adsorption of carbon dioxide on alkali-modified zeolite 13X adsorbents

Zhao, Z., Cui, X., Ma, J., et al. (2007) · International journal of greenhouse gas control · doi:10.1016/s1750-5836(07)00072-2 · Cited by 161 · see citing works

CO2 capture using triamine-grafted SBA-15: The impact of the support pore structure

Lashaki, M. J., & Sayari, A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.103 · Cited by 160 · see citing works

Development of a new clay supported polyethylenimine composite for CO2 capture

Wang, W., Xiao, J., Wei, X., et al. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.03.090 · Cited by 158 · see citing works

Amino functionalized mesostructured SBA-15 silica for CO2 capture: Exploring the relation between the adsorption capacity and the distribution of amino groups by TEM

Sanz, R., Calleja, G., Arencibia, A., & Sanz-Pérez, E. S. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.03.053 · Cited by 153 · see citing works

Rate Equation Theory for the Carbonation Reaction of CaO with CO2

Li, Z., Sun, H., & Cai, N. (2012) · Energy & Fuels · doi:10.1021/ef300607z · Cited by 144 · see citing works

Study on the preparation of wood vinegar from biomass residues by carbonization process

Wu, Q., Zhang, S., Hou, B., et al. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.12.026 · Cited by 143 · see citing works

Finely tuning MOFs towards high-performance post-combustion CO 2 capture materials

Wang, Q., Bai, J., Lu, Z., Pan, Y., & You, X. (2015) · Chemical Communications · doi:10.1039/c5cc07751f · Cited by 141 · see citing works

Modeling of Sorption-Enhanced Steam Reforming in a Dual Fluidized Bubbling Bed Reactor

Johnsen, K., Grace, J. R., Elnashaie, S. S. E. H., Kolbeinsen, L., & Eriksen, D. Ø. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0511736 · Cited by 140 · see citing works

Amino-impregnated MOF materials for CO2 capture at post-combustion conditions

Martı́nez, F., Sanz, R., Orcajo, G., Briones, D., & Yángüez, V. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.11.033 · Cited by 139 · see citing works

One-Step Synthesis of Microporous Carbon Monoliths Derived from Biomass with High Nitrogen Doping Content for Highly Selective CO2 Capture

Geng, Z., Xiao, Q., Lv, H. Q., Li, B., Wu, H. B., Lu, Y., & Zhang, C. (2016) · Scientific Reports · doi:10.1038/srep30049 · Cited by 136 · see citing works

Pressure swing adsorption for CO 2 /N 2 and CO 2 /CH 4 separation: Comparison between activated carbons and zeolites performances

Kacem, M., Pellerano, M., & Delebarre, A. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.04.032 · Cited by 135 · see citing works

Potassium salt-assisted synthesis of highly microporous carbon spheres for CO2 adsorption

Ludwinowicz, J., & Jaroniec, M. (2014) · Carbon · doi:10.1016/j.carbon.2014.10.074 · Cited by 135 · see citing works

Nature of Adsorption and Desorption Branches in Cylindrical Pores

Morishige, K., & Nakamura, Y. (2004) · Langmuir · doi:10.1021/la030414g · Cited by 132 · see citing works

CO2 Absorption Using Dry Potassium-Based Sorbents with Different Supports

Zhao, C., Chen, X., & Zhao, C. (2009) · Energy & Fuels · doi:10.1021/ef900182d · Cited by 131 · see citing works

Synthesis of porous polymer based solid amine adsorbent: Effect of pore size and amine loading on CO2 adsorption

Liu, F., Chen, S., & Gao, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.049 · Cited by 119 · see citing works

Porous polymers prepared via high internal phase emulsion polymerization for reversible CO2 capture

He, H., Li, W., Lamson, M., Zhong, M., Konkolewicz, D., Hui, C. M., Yaccato, K. J., Rappold, T., Sugar, G., David, N. E., et al. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.002 · Cited by 114 · see citing works

Modified nanosepiolite as an inexpensive support of tetraethylenepentamine for CO2 sorption

Irani, M., Fan, M., Ismail, H., Tuwati, A., Dutcher, B., & Russell, A. G. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.11.005 · Cited by 111 · see citing works

Experimental and Theoretical Investigations of Adsorption Hysteresis and Criticality in MCM-41: Studies with O2, Ar, and CO2

Sonwane, C. G., Bhatia, S. K., & Calos, N. J. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970883b · Cited by 111 · see citing works

Influence of stripper operating parameters on the performance of amine absorption systems for post-combustion carbon capture: Part I. High pressure strippers

Warudkar, S. S., Cox, K. R., Wong, M. S., et al. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.01.050 · Cited by 111 · see citing works

Development of silica‐gel‐supported polyethylenimine sorbents for CO2 capture from flue gas

Zhang, Z., Ma, X., Wang, D., et al. (2011) · AIChE Journal · doi:10.1002/aic.12771 · Cited by 104 · see citing works

Facile fabrication of cost-effective porous polymer networks for highly selective CO 2 capture

Sun, L., Li, A., Liu, X., Liu, X., Feng, D., Lu, W., Yuan, D., & Zhou, H.-C. “. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06039c · Cited by 102 · see citing works

Polyethylenimine-incorporated zeolite 13X with mesoporosity for post-combustion CO2 capture

Chen, C., Kim, S.-S., Cho, W.-S., & Ahn, W. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.106 · Cited by 100 · see citing works

Tuning the textural properties of HMS mesoporous silica. Functionalization towards CO2 adsorption

Sanz-Pérez, E. S., Arencibia, A., Calleja, G., & Sanz, R. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.10.038 · Cited by 100 · see citing works

Effect of activating agents on the development of microporosity in polymeric-based carbon for CO2 adsorption

Ludwinowicz, J., & Jaroniec, M. (2015) · Carbon · doi:10.1016/j.carbon.2015.07.052 · Cited by 98 · see citing works

Sulfuric Acid Modified Bentonite as the Support of Tetraethylenepentamine for CO 2 Capture

Wang, W., Wang, X., Song, C., et al. (2013) · Energy & Fuels · doi:10.1021/ef3021816 · Cited by 95 · see citing works

Enhancing CO2 adsorption and separation ability of Zr(IV)-based metal–organic frameworks through ligand functionalization under the guidance of the quantitative structure–property relationship model

Huang, H., Zhang, W., Yang, F., Wang, B., Yang, Q., Xie, Y.-B., Zhong, C., & Li, J. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.12.100 · Cited by 89 · see citing works

Probing Intramolecular versus Intermolecular CO2 Adsorption on Amine-Grafted SBA-15

Yoo, C., Lee, L.-C., & Jones, C. W. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b03657 · Cited by 87 · see citing works

Highly selective adsorption of CO over CO2 in a Cu(I)-chelated porous organic polymer

Yoon, J. W., Yoon, T.-U., Kim, E., Kim, A.-R., Jung, T.-S., Han, S.-S., & Bae, Y. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.07.065 · Cited by 86 · see citing works

Stability of Supported Amine Adsorbents to SO 2 and NO x in Postcombustion CO 2 Capture. 2. Multicomponent Adsorption

Rezaei, F., & Jones, C. W. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie502024z · Cited by 85 · see citing works

Experimental and computational studies of pyridine-assisted post-synthesis modified air stable covalent–organic frameworks

Du, Y. P., Mao, K., Kamakoti, P., et al. (2012) · Chemical Communications · doi:10.1039/c2cc30781b · Cited by 83 · see citing works

Activated carbons with high nitrogen content by a combination of hydrothermal carbonization with activation

Laginhas, C., Nabais, J. M. V., & Titirici, M. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.12.047 · Cited by 82 · see citing works

Effect of support material on the performance of K2CO3-based pellets for cyclic CO2 capture

Qin, C., Yin, J., Ran, J., Zhang, L., & Feng, B. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.09.043 · Cited by 78 · see citing works

Optimization of CO2Capture Process from Simulated Flue Gas by Dry Regenerable Alkali Metal Carbonate Based Adsorbent Using Response Surface Methodology

Amiri, M., Shahhosseini, S., & Ghaemi, A. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b03303 · Cited by 76 · see citing works

Facile synthesis of silica aerogel supported K2CO3 sorbents with enhanced CO2 capture capacity for ultra-dilute flue gas treatment

Guo, Y., Zhao, C., Sun, J., et al. (2017) · Fuel · doi:10.1016/j.fuel.2017.11.113 · Cited by 75 · see citing works

Polyethylenimine-Magadiite Layered Silicate Sorbent for CO2 Capture

Vieira, R. B., & Pastore, H. O. (2014) · Environmental Science & Technology · doi:10.1021/es404501e · Cited by 71 · see citing works

Post-combustion CO2 adsorption on activated carbons with different textural properties

Montagnaro, F., Silvestre‐Albero, A., Silvestre‐Albero, J., Rodríguez-Reinoso, F., Erto, A., Lancia, A., & Balsamo, M. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.09.037 · Cited by 70 · see citing works

Synthesis and characterization of mesoporous silica SBA-15 functionalized by mono-, di-, and tri-amine and its catalytic behavior towards Michael addition

Hakiki, A., Boukoussa, B., Zahmani, H. H., et al. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.12.039 · Cited by 70 · see citing works

Facile Synthesis of a Pentiptycene-Based Highly Microporous Organic Polymer for Gas Storage and Water Treatment

Luo, S., Zhang, Q., Zhang, Y., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02566 · Cited by 70 · see citing works

Synthesis of a Porous Nano‐CaO/MgO‐Based CO 2 Adsorbent

Lan, P., & Wu, S. (2014) · Chemical Engineering & Technology · doi:10.1002/ceat.201300709 · Cited by 69 · see citing works

Effect of support structure on CO2 adsorption properties of pore-expanded hyperbranched aminosilicas

Drese, J. H., Choi, S., Didas, S. A., et al. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.10.031 · Cited by 67 · see citing works

Carbon dioxide capture with amino-functionalised zeolite-β: A temperature programmed desorption study under dry and humid conditions

Madden, D. G., & Curtin, T. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.03.041 · Cited by 67 · see citing works

Zeolite sorbent that effectively removes mercury from flue gases

Morency, J. D. (2002) · Filtration & Separation · doi:10.1016/s0015-1882(02)80207-5 · Cited by 66 · see citing works

Effect of characteristics of KI-impregnated activated carbon and flue gas components on Hg0 removal

Li, T., Yue, T., Zuo, P., Zhang, X., Wang, C., Gao, J., & Wang, K. (2017) · Fuel · doi:10.1016/j.fuel.2016.12.083 · Cited by 63 · see citing works

Microwave-assisted production of activated carbons from oil palm shell in the presence of CO2 or N2 for CO2 adsorption

Hesas, R. H., Arami‐Niya, A., Daud, W. M. A. W., & Sahu, J. N. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.029 · Cited by 62 · see citing works

Structure design of a hyperbranched polyamine adsorbent for CO 2 adsorption

He, H. R., Zhuang, L., Chen, S., Liu, H., & Li, Q. (2016) · Green Chemistry · doi:10.1039/c6gc01416j · Cited by 61 · see citing works

Effect of flow patterns/regimes on CO2 capture using K2CO3 solid sorbent in fluidized bed/circulating fluidized bed

Jaiboon, O.-A., Chalermsinsuwan, B., Mekasut, L., et al. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.12.081 · Cited by 60 · see citing works

The effect of relative humidity on CO2 capture capacity of potassium-based sorbents

Lee, S. C., Chae, H. J., Choi, B. Y., et al. (2011) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-010-0398-x · Cited by 60 · see citing works

Parametrical Study on CO2 Capture from Ambient Air Using Hydrated K2CO3 Supported on an Activated Carbon Honeycomb

Rodríguez-Mosqueda, R., Bramer, E. A., Roestenberg, T., & Brem, G. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00566 · Cited by 59 · see citing works

Effect of pore size, aminosilane density and aminosilane molecular length on CO 2 adsorption performance in aminosilane modified mesoporous silica

Hori, K., Higuchi, T., Aoki, Y., et al. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.03.020 · Cited by 55 · see citing works

Environmental concern-based site screening of carbon dioxide geological storage in China

Cai, B., Li, Q., Liu, G., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-07881-7 · Cited by 55 · see citing works

Experimental and modeling investigation on CO2 sorption kinetics over K2CO3-modified silica aerogels

Zhao, C., Guo, Y., Li, W., et al. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.121 · Cited by 54 · see citing works

A simple and novel protocol for Li-trapping with a POM/MOF nano-composite as a new adsorbent for CO 2 uptake

Ghahramaninezhad, M., Soleimani, B., & Shahrak, M. N. (2018) · New Journal of Chemistry · doi:10.1039/c8nj00274f · Cited by 53 · see citing works

Control of Uniform and Interconnected Macroporous Structure in PolyHIPE for Enhanced CO2 Adsorption/Desorption Kinetics

Wang, Q., Liu, Y., Chen, J., et al. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00579 · Cited by 51 · see citing works

Comparative studies of CO₂ capture using acid and base modified activated carbon from sugarcane bagasse

Alhassan, M., Andrew, I., Auta, M., Umaru, M., Garba, M. U., Isah, A. G., & Alhassan, B. (2018) · Biofuels · doi:10.1080/17597269.2017.1306680 · Cited by 51 · see citing works

Determination of Carbonation/Calcination Reaction Kinetics of a Limestone Sorbent in low CO2 Partial Pressures Using TGA Experiments

Ramezani, M. R., Tremain, P., Doroodchi, E., et al. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1168 · Cited by 51 · see citing works

Adsorption of CO2, CO, CH4 and N2 on DABCO based metal organic frameworks

Mishra, P. K., Edubilli, S., Mandal, B., & Gumma, S. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.10.025 · Cited by 50 · see citing works

CO2 recovery from mixtures with nitrogen in a vacuum swing adsorber using metal organic framework adsorbent: A comparative study

Dasgupta, S., Biswas, N., Aarti, A., Gode, N. G., Divekar, S., Nanoti, A., & Goswami, A. N. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.10.007 · Cited by 50 · see citing works

On the Structure–Property Relationships of Cation‐Exchanged ZK‐5 Zeolites for CO2 Adsorption

Pham, T. D., Hudson, M. R., Brown, C. M., & Lobo, R. F. (2017) · ChemSusChem · doi:10.1002/cssc.201601648 · Cited by 50 · see citing works

Thermal Decomposition of Biomineralized Calcium Carbonate: Correlation between the Thermal Behavior and Structural Characteristics of Avian Eggshell

Tsuboi, Y., & Koga, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04943 · Cited by 50 · see citing works

Effects of the Adsorbent Preparation Method for CO2 Capture from Flue Gas Using K2CO3/Al2O3 Adsorbents

Sengupta, S., Amte, V., Rajeshwer, D., et al. (2014) · Energy & Fuels · doi:10.1021/ef501792c · Cited by 44 · see citing works

Enhancement in CO 2 Adsorption on Hydrotalcite-based Material by Novel Carbon Support Combined with K 2 CO 3 Impregnation

Bhatta, L. K. G., Seetharamu, S., Madhusoodana, C. D., Bhatta, U. M., & Venkatesh, K. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02020 · Cited by 41 · see citing works

Synthesis of bare and functionalized porous adsorbent materials for CO2 capture

Olajire, A. A. (2017) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1657 · Cited by 41 · see citing works

Insights into Azetidine Polymerization for the Preparation of Poly(propylenimine)-Based CO 2 Adsorbents

Sarazen, M. L., & Jones, C. W. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b02402 · Cited by 41 · see citing works

Development and characterization of amine-functionalized hyper-cross-linked resin for CO 2 capture

Liu, F., Wang, S., Lin, G., et al. (2017) · New Journal of Chemistry · doi:10.1039/c7nj03421k · Cited by 40 · see citing works

Flying MOFs: polyamine-containing fluidized MOF/SiO 2 hybrid materials for CO 2 capture from post-combustion flue gas

Luz, I., Soukri, M., & Lail, M. A. (2018) · Chemical Science · doi:10.1039/c7sc05372j · Cited by 39 · see citing works

The effects of pyridine on the structure of B-COFs and the underlying mechanism

Du, Y. P., Mao, K., Kamakoti, P., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12515g · Cited by 38 · see citing works

EFFECT OF CARBONIZATION TEMPERATURE ON PROPERTIES OF CHAR AND ACTIVATED CARBON FROM COCONUT SHELL

Katesa, J., & Tangsathitkulchai, C. (2013) · Cited by 38 · see citing works

Sequestration of CO 2 using Cu nanoparticles supported on spherical and rod-shape mesoporous silica

Khdary, N. H., Ghanem, M. A., Abdesalam, M. E., & Al-Garadah, M. M. (2016) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2016.05.004 · Cited by 38 · see citing works

Porous metal–organic frameworks with high stability and selective sorption for CO2 over N2

Hou, C., Liu, Q., Wang, P., & Sun, W. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.01.020 · Cited by 37 · see citing works

Moisture-Responsive Hydrogel Impregnated in Porous Polymer Foam as CO2 Adsorbent in High-Humidity Flue Gas

Han, J., Du, Z., Zou, W., Li, H., & Zhang, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b01305 · Cited by 37 · see citing works

Pyridine-functionalized organic porous polymers: applications in efficient CO 2 adsorption and conversion

Yang, Z., Wang, H., Ji, G., et al. (2017) · New Journal of Chemistry · doi:10.1039/c6nj03899a · Cited by 37 · see citing works

Interfacial control of polyHIPE with nano-TiO2 particles and polyethylenimine toward actual application in CO2 capture

Wang, Q., Ma, H., Chen, J., Du, Z., & Mi, J. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.05.034 · Cited by 34 · see citing works

The effect of steam on a synthetic Ca-based sorbent for carbon capture

González, B., Liu, W., Sultan, D. S., et al. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.09.107 · Cited by 33 · see citing works

Fabrication of mixed‐matrix membranes with MOF‐derived porous carbon for CO2 separation

Zhang, W., Liu, D., Guo, X., et al. (2018) · AIChE Journal · doi:10.1002/aic.16187 · Cited by 32 · see citing works

Crystal-Size Effects on Carbon Dioxide Capture of a Covalently Alkylamine-Tethered Metal-Organic Framework Constructed by a One-Step Self-Assembly

Kim, Y. K., Hyun, S., Lee, J. H., Kim, T. K., Moon, D., & Moon, H. R. (2016) · Scientific Reports · doi:10.1038/srep19337 · Cited by 30 · see citing works

Adjusting the proportions of extra-framework K+ and Cs+ cations to construct a “molecular gate” on ZK-5 for CO2 removal

Yang, J., Shang, H., Krishna, R., Wang, Y., Ouyang, K., & Li, J. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.03.034 · Cited by 30 · see citing works

Construction of Nitrogen-Containing Hierarchical Porous Polymers and Its Application on Carbon Dioxide Capturing

Duan, C. H., Du, Z., Zou, W., Li, H., & Zhang, C. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00680 · Cited by 27 · see citing works

Light-Triggered CO2 Breathing Foam via Nonsurfactant High Internal Phase Emulsion

Zhang, S., Wang, D., Pan, Q., Gui, Q., Liao, S., & Wang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11315 · Cited by 24 · see citing works

Shaped polyethyleneimine sorbents for CO 2 capture

Knowles, G. P., Liang, Z., & Chaffee, A. L. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.03.019 · Cited by 22 · see citing works

Understanding the deactivation of K2CO3/AC for low-concentration CO2 removal in the presence of trace SO2 and NO2

Guo, Y., Li, C., Lu, S., et al. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.05.011 · Cited by 22 · see citing works

Proceedings of the 4th International Gas Processing Symposium

(2015) · Elsevier eBooks · doi:10.1016/c2013-0-19013-7 · Cited by 22 · see citing works

Kinetic Behavior of Solid K2CO3 under Postcombustion CO2 Capture Conditions

Jayakumar, A., Gomez, A., & Mahinpey, N. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04498 · Cited by 19 · see citing works

Sol–gel hydrothermal synthesis of microstructured CaO-based adsorbents for CO 2 capture

Hlaing, N. N., Sreekantan, S., Othman, R., Pung, S., Hinode, H., Kurniawan, W., Thant, A. A., Mohamed, A. R., & Salime, C. (2014) · RSC Advances · doi:10.1039/c4ra14355h · Cited by 18 · see citing works

Efficacious means for inhibiting the deactivation of K2CO3/AC for low-concentration CO2 removal in the presence of SO2 and NO2

Guo, Y., Li, C., Lu, S., et al. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.085 · Cited by 18 · see citing works

K2CO3-Modified Potassium Feldspar for CO2 Capture from Post-combustion Flue Gas

Guo, Y., Li, C., Lu, S., & Zhao, C. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02207 · Cited by 16 · see citing works

Adsorptive removal of carbon dioxide using polyethyleneimine loaded glass fiber in a fixed bed

Wang, W., Zeng, Q., Li, M. K., Zheng, W., Christianson, D., & Economy, J. (2015) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.05.001 · Cited by 14 · see citing works

Study on the Effect of Preparation Parameters of K2CO3/Al2O3 Sorbent on CO2 Capture Capacity at Flue Gas Operating Conditions

Esmaili, J., & Ehsani, M. R. (2013) · Journal of Encapsulation and Adsorption Sciences · doi:10.4236/jeas.2013.32007 · Cited by 13 · see citing works

ICHEAP12 : 12th International Conference on Chemical & Process Engineering

Pierucci, S., & Klemeš, J. J. (2015) · Cited by 13 · see citing works

Preparation of Polyethylenimine Impregnated Mesoporous Precipitated Silica for CO2 Capture

Quang, Đ. V., Rayer, A. V., Hadri, N. E., & Abu‐Zahra, M. R. M. (2015) · Elsevier eBooks · doi:10.1016/b978-0-444-63461-0.50003-1 · Cited by 12 · see citing works

New Poly(Vinylbenzylchloride/Divinylbenzene) Adsorbent for Carbon Dioxide Adsorption. I. Synthesis and Parametric Study

Saiwan, C., Muchan, P., deMontigny, D., et al. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.250 · Cited by 7 · see citing works

Development of Polymer from High Internal Phase Emulsion for CO2 Adsorption

Muchan, P., Saiwan, C., deMontigny, D., et al. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.05.096 · Cited by 4 · see citing works

Effect of Biopolymer Loading into High Porosity Polymer Adsorbent for Carbon Dioxide Adsorption

Saiwan, C., Jaroensin, S., & Tontiwachwutikul, P. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.249 · Cited by 3 · see citing works

Influence of surface modification on selective CO2 adsorption: A technical review on mechanisms and methods

Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381 · see citing works

Recent advances in biochar-based adsorbents for CO2 capture

Guo, S., Li, Y., Wang, Y., Wang, L., Sun, Y., & Liu, L. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100059 · Cited by 201 · see citing works

Solid‐waste‐Derived carbon dioxide‐capturing materials

Wang, J., Yang, Y., Jia, Q., Shi, Y., Guan, Q., Yang, N., Ning, P., & Wang, Q. (2019) · ChemSusChem · doi:10.1002/cssc.201802655 · Cited by 60 · see citing works

Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing

Ahmed, S., Hossain, D., Dipti, S. S., Karim, M. A., & Azad, M. A. K. (2025) · Scientific Reports · doi:10.1038/s41598-025-31699-3 · Cited by 4 · see citing works

Effects of TETA on MEA-MDEA amine solution in recovering carbon dioxide from flue gas

Yi-lan, W., & Energy, C. (2010) · Environmental Pollution & Control

Flue Gas Composition Affects for NOχ Removal Technology using NH3 as Reductant

INABA, H. (1978) · Journal of the Fuel Society of Japan · doi:10.3775/jie.57.10_826 · Cited by 1 · see citing works

Flue Gas Management

Leisenberg, P. D. W. (2016) · Springer eBooks · doi:10.1007/978-3-319-48200-2_52 · Cited by 1 · see citing works

Optimization and control of NOx in coke oven vertical flue under flue gas recirculation

Wang, G., Wang, G., Wang, Q., et al. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/729/1/012078 · Cited by 2 · see citing works

Arrangement Optimization of Flue Gas Duct for 1000 MW Unit

Xiao-qun, L. (2010) · Electric Power Construction