Influence of slag composition on the hydration of alkali-activated slags
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
The hydration of different blast-furnace slags with sodium metasilicate or NaOH as activator was investigated. Sodium metasilicate shows poor strength after 1 day, but high strength after 7 days and beyond, whereas NaOH activation leads to high strength after 1 day , but only moderate strength development at later ages. At the same hydration degree, sodium metasilicate activation gives a much higher compressive strength than NaOH activation. This is due to the formation of a dense hydration product in the NaOH-activated system at the early age, which leads to a more porous microstructure than in the case of sodium metasilicate. A higher MgO content in the slags is beneficial with respect to faster hydration kinetics and a more rapid strength development. Increasing Al2O3 contents lead to slightly slower hydration kinetics and slightly lower compressive strengths. The best correlation between compressive strength and slag composition was found using the extended basicity (CaO + MgO)/SiO2 index.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406 · cited 1×
“[1–5] In Portland cement technology a wide variety of industrial by-products are used as supplementary cementitious materials, including fly ash from coal combustion, ground-granulated blast furnace slag from iron production, and silica fumes from ferrosilicon production.[6] However, these generally replace only a por…”
BackgroundSelf-citationNew cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Self-citationHydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Kulik, D. A., Wagner, T., Dmytrieva, S. V., Kosakowski, G., Hingerl, F. F., Chudnenko, K. V., & Berner, U. R. (2012) · Computational Geosciences · doi:10.1007/s10596-012-9310-6 · Cited by 936
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Wagner, T., Kulik, D. A., Hingerl, F. F., & Dmytrieva, S. V. (2012) · The Canadian Mineralogist · doi:10.3749/canmin.50.5.1173 · Cited by 621 · cited 3×
“Thermodynamic modeling was carried out using the geochemical software GEMS [61,62] in combination with the cemdata2007 database.”
MethodHaha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
Self-citationBernal, S. A., San Nicolas, R., Myers, R. J., Mejía de Gutiérrez, R., Puertas, F., van Deventer, J. S. J., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.003 · Cited by 493 · cited 1×
“In a recent study [30], it is reported that with increasing MgO content the early hydration of a slag is decelerated, but the hydration degree at longer hydration times is increased.”
Background
Cited by
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Ke, X., Bernal, S. A., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.012 · Cited by 328
“TheMgO content of slag has also been reported to affect the reaction kinetics, microstructure and strength development of sodium silicateor hydroxide-activated slag, related to availability of Al and the formation of layered double hydroxides with a hydrotalcite-like structure [4,16,17].”
BackgroundKe, X., Bernal, S. A., Provis, J. L., & Lothenbach, B. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106158 · Cited by 117
“The phase assemblages predicted for non‐carbonated pastes are in accordance with observations from experimental characterisation of alkali-activated slag activated by sodium hydroxide [12,41], and sodium silicate [15,42].”
Self-citationCriado, M., Walkley, B., Ke, X., Provis, J. L., & Bernal, S. A. (2018) · Sustainability · doi:10.3390/su10124709 · Cited by 63
“[26] was adopted in this study to identify any potential correlation between the chemical composition of the slag, the initial precipitation of the reaction products, and the extent of the reaction of the slag.”
Method
Metadata
- Authors
- Winnefeld, F., Ben Haha, M., Le Saout, G., Costoya, M., Ko, S.-C., & Lothenbach, B.
- Venue
- Journal of Sustainable Cement-Based Materials
- Publisher
- Informa UK Limited
- Published
- 2014-10-27
- Volume
- 4
- Issue
- 2
- Pages
- 85-100
- ISSN
- 2165-0373 (ISSN-L)
- 2165-0381
- OpenAlex
- W2012165251
- Cited by
- 109
- References
- 11
- FWCI
- 10.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of slag composition on the hydration of alkali-activated slags. https://app.cochat.ai/papers/10.1080/21650373.2014.955550
- The paper
- Winnefeld, F., Ben Haha, M., Le Saout, G., Costoya, M., Ko, S.-C., & Lothenbach, B. (2015). Influence of slag composition on the hydration of alkali-activated slags. Journal of Sustainable Cement-Based Materials. https://doi.org/10.1080/21650373.2014.955550
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.