Slag and Activator Chemistry Control the Reaction Kinetics of Sodium Metasilicate-Activated Slag Cements
Open accessThe DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
The reaction kinetics of four commercial ground granulated blast furnace slags with varying percentages of MgO (6 to 14 wt.%), activated with four different doses of sodium metasilicate, were evaluated using isothermal calorimetry. The reaction kinetics were strongly dependent on the dose of the alkaline activator used, and the chemical and physical properties of the slag. When using low concentrations of sodium metasilicate as an activator, the MgO content in the slag influences the kinetics of the reaction, while the CaO content plays a more significant role when the concentration of metasilicate is increased. This study elucidated a close relationship between the dose of the alkali-activator and the chemistry of the slag used, although it was not possible to identify a clear correlation between any of the published chemically-based “slag quality moduli” and the calorimetry results, highlighting the complexity of blast furnace slag glass chemistry, and the importance of the physical properties of the slag in defining its reactivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Self-citationAdvances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationBen Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Geopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Self-citationHaha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914 · cited 5×
“activated slags with higher slag MgO content reacted more rapidly than those with lower MgO content [15].”
BackgroundResultInfluentialEvolution of binder structure in sodium silicate-activated slag-metakaolin blends
Bernal, S. A., Provis, J. L., Rose, V., & Mejía de Gutierrez, R. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.09.004 · Cited by 786 · cited 1×
“This drives faster dissolution of the slag particles and precipitation of mainly C-(A)-S-H type gels [11,22,23], which have been reported as the main reaction product for the silicate activated slags used in this study, and others of comparable composition [9].”
MethodSelf-citationFactors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716 · cited 2×
“However, silicate-activated slag cements exhibit higher mechanical performance and stability than hydroxide-activated slag cements due to the nature of the reaction products formed [5].”
BackgroundProvis, J. L., & van Deventer, J. S. J. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845696382 · Cited by 646
Self-citationHaha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
Incorporation of aluminium in calcium-silicate-hydrates
L’Hôpital, E., Lothenbach, B., Le Saout, G., Kulik, D., & Scrivener, K. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.007 · Cited by 551 · cited 2×
“The bulk gel chemical compositions are controlled mostly by the availability of CaO, SiO2, and Al2O3 [30,31], which in practice relate to the chemistry of the slag used, the activator dose, and the degree of reaction achieved.”
Background
Research works printed but not linked: 2
- Osborn, E.F., Roeder, P.L., and Ulmer, G.C. (1969). Part I—Phase equilibria at solidus temperatures in the quaternary system CaO-MgO-Al2O3-SiO2 and their bearing on optimun composition of blast furnace slag and on slag properties. Bulletin of the Earth and Mineral Sciences Experiment Station, The Pennsylvania State University.
- Smolczyk, H.G. (July, January 30). Slag structure and identification of slags. Proceedings of the 7th International Congress on the Chemistry of Cement, Paris, France.
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationLi, L., Xie, J., Zhang, B., Feng, Y., & Yang, J. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130389 · Cited by 160
Luukkοnen, T., Sreenivasan, H., Abdollahnejad, Z., Yliniemi, J., Kantola, A. M., Telkki, V., Kinnunen, P., & Illikainen, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117354 · Cited by 152
A Review of Durability and Strength Characteristics of Alkali-Activated Slag Concrete
Mohamed, O. A. (2019) · Materials · doi:10.3390/ma12081198 · Cited by 163
“In general, the high pH of the alkaline activator promotes dissolution of GGBS, which drives chemical reaction and strength development [14].”
BackgroundPalomo, A., Maltseva, O., García-Lodeiro, I., & Fernández‐Jiménez, A. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.705475 · Cited by 131
Metadata
- Authors
- Criado, M., Walkley, B., Ke, X., Provis, J. L., & Bernal, S. A.
- Affiliations
- Instituto de Ciencias de La Construcción Eduardo Torroja (ES)
- University of Sheffield (GB)
- University of Bath (GB)
- University of Leeds (GB)
- Corresponding author
- Provis, John L.
- Bernal, Susan A.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2018-12-11
- Volume
- 10
- Issue
- 12
- Pages
- 4709
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2905264317
- Cited by
- 63
- References
- 28
- Citations by year
- 2026: 6 · 2025: 2 · 2024: 2 · 2023: 14 · 2022: 14 · 2021: 8 · 2020: 9 · 2019: 8
- FWCI
- 5.62
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- FP7 Ideas: European Research Council (StG 335928)
- Engineering and Physical Sciences Research Council (EP/P013171/1, EP/R001642/1)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Keywords
- ground granulated blast furnace slag, sodium metasilicate, alkali-activated slag, reaction kinetics, MgO content, CaO content, slag reactivity, isothermal calorimetry
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Slag and Activator Chemistry Control the Reaction Kinetics of Sodium Metasilicate-Activated Slag Cements. https://app.cochat.ai/papers/10.3390/su10124709
- The paper
- Criado, M., Walkley, B., Ke, X., Provis, J. L., & Bernal, S. A. (2018). Slag and Activator Chemistry Control the Reaction Kinetics of Sodium Metasilicate-Activated Slag Cements. Sustainability. https://doi.org/10.3390/su10124709
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.