Pure colloidal metal and ceramic nanoparticles from high-power picosecond laser ablation in water and acetone
The DOI matches its Crossref record; 44 of the 45 references it cites were found in a registry or an index.
Abstract
The generation of colloids by laser ablation of solids in a liquid offers a nearly unlimited material variety and a high purity as no chemical precursors are required. The use of novel high-power ultra-short-pulsed laser systems significantly increases the production rates even in inflammable organic solvents. By applying an average laser power of 50 W and pulse durations below 10 ps, up to 5 mg min(-1) of nanoparticles have been generated directly in acetone, marking a breakthrough in productivity of ultra-short-pulsed laser ablation in liquids. The produced colloids remain stable for more than six months. In the case of yttria-stabilized zirconia ceramic, the nanoparticles retain the tetragonal crystal structure of the ablated target. Laser beam self-focusing plays an important role, as a beam radius change of 2% on the liquid surface can lead to a decrease of nanoparticle production rates of 90% if the target position is not re-adjusted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“the type of the ablated material influences the onset of the saturation in the ablation rate [83,85,92] by different laser fluence thresholds and penetration depths.”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [85]
In the citing paper
“Naturally, the ablation rate in LAL follows a logarithmic growth when increasing the laser fluence of femtosecond [90], picosecond [82,88] and nanosecond [85] pulses.”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [85]
Citations
Cites
(1990) · Cited by 9,358
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Femtosecond filamentation in transparent media
COUAIRON, A., & MYSYROWICZ, A. (2007) · Physics Reports · doi:10.1016/j.physrep.2006.12.005 · Cited by 2,851
Lewinski, N., Colvin, V., & Drezek, R. (2008) · Small · doi:10.1002/smll.200700595 · Cited by 2,810
Size and Temperature Dependence of the Plasmon Absorption of Colloidal Gold Nanoparticles
Link, S., & El-Sayed, M. A. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp984796o · Cited by 2,787
Dahl, J. A., Maddux, B. L. S., & Hutchison, J. E. (2007) · Chemical Reviews · doi:10.1021/cr050943k · Cited by 1,284
Phase relationships in the zirconia-yttria system
Scott, H. G. (1975) · Journal of Materials Science · doi:10.1007/bf01031853 · Cited by 1,282
Laser ablation in liquids: Applications in the synthesis of nanocrystals
Yang, G. W. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.10.016 · Cited by 1,055
Marburger, J. H. (1975) · Progress in Quantum Electronics · doi:10.1016/0079-6727(75)90003-8 · Cited by 1,050
Formation and Size Control of Silver Nanoparticles by Laser Ablation in Aqueous Solution
Mafuné, Kohno, J.-Y., Takeda, Y., Kondow, T., & Sawabe, H. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp001336y · Cited by 838
Research works printed but not linked: 3
- Weiler S, 2008, Mikroproduktion, 3, 28
- Burda C, 2005, Chemistry and Properties of Nanocrystals of Different Shapes Chemical Reviews, 105, 1025
- Bärsch N Gatti A Barcikowski S, 2008, Proc. LPM
Cited by
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Self-citationPfeiffer, C., Rehbock, C., Hühn, D., Carrillo-Carrion, C., de Aberasturi, D. J., Merk, V., Barcikowski, S., & Parak, W. J. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2013.0931 · Cited by 378
Self-citationPulsed laser ablation in liquid for micro-/nanostructure generation
Yan, Z., & Chrisey, D. B. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.04.004 · Cited by 365
Xiao, J., Liu, P., Wang, C. X., & Yang, G. W. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.004 · Cited by 352
Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications
Fazio, E., Gökce, B., De Giacomo, A., Meneghetti, M., Compagnini, G., Tommasini, M., Waag, F., Lucotti, A., Zanchi, C. G., Ossi, P. M., et al. (2020) · Nanomaterials · doi:10.3390/nano10112317 · Cited by 346
“In addition, the type of the ablated material influences the onset of the saturation in the ablation rate [83,85,92] by different laser fluence thresholds and penetration depths.”
BackgroundInfluential
Metadata
- Authors
- Bärsch, N., Jakobi, J., Weiler, S., & Barcikowski, S.
- Affiliations
- Laser Zentrum Hannover (DE)
- TRUMPF (Germany) (DE)
- ORCID
- Barcikowski, Stephan
- Venue
- Nanotechnology
- Publisher
- IOP Publishing
- Published
- 2009-10-05
- Volume
- 20
- Issue
- 44
- Pages
- 445603
- ISSN
- 0957-4484 (ISSN-L)
- 1361-6528
- OpenAlex
- W1991322965
- Semantic Scholar
- 078194cdd5e39ac6f3b9341ccf31b116c4cb84c2
- Cited by
- 122
- References
- 45
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 3 · 2023: 6 · 2022: 2 · 2021: 3 · 2020: 4 · 2019: 9 · 2018: 4 · 2017: 13 · 2016: 8 · 2015: 10 · 2014: 15 · 2013: 11 · 2012: 10
- FWCI
- 4.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Nanotechnology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Bundesministerium für Bildung und Forschung
- Bundesministerium für Wirtschaft und Technologie
- Gottfried Wilhelm Leibniz Universität Hannover
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Keywords
- laser ablation in liquid, picosecond pulses, metal nanoparticles, ceramic nanoparticles, yttria-stabilized zirconia, acetone, colloidal stability, laser self-focusing, tetragonal zirconia, high-power lasers
- MeSH terms
- Acetone, Ceramics, Colloids, Copper, Dental Porcelain, Lasers, Light, Magnesium, Particle Size, Scattering, Radiation, Silver, Spectrophotometry, Spectrophotometry, Ultraviolet, Water, Yttrium, Zirconium, Crystallography, X-Ray, Nanotechnology, Microscopy, Electron, Transmission, Nanoparticles, Metal Nanoparticles, Static Electricity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pure colloidal metal and ceramic nanoparticles from high-power picosecond laser ablation in water and acetone. https://app.cochat.ai/papers/10.1088/0957-4484/20/44/445603
- The paper
- Bärsch, N., Jakobi, J., Weiler, S., & Barcikowski, S. (2009). Pure colloidal metal and ceramic nanoparticles from high-power picosecond laser ablation in water and acetone. Nanotechnology. https://doi.org/10.1088/0957-4484/20/44/445603
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.