The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings
Abstract
The thermal and mechanical properties of a new negative photoresist, SU8, were characterized. The influence of curing conditions, such as baking temperature, baking time and UV dosage, on the thermal and mechanical properties of the resultant coatings was studied in detail. It was found that the glass-transition temperature ( T g ) of the coatings was coincident with the baking temperature over the temperature range of 25 °C–220 °C for coatings being baked for just 20 min. However, the T g reached a limiting value (about 240 °C) once the cross-linking reaction was complete, and would not increase further with the baking temperature. The peak temperature of the dimension versus temperature plots, where heat shrinkage occurred, was about a factor of 1.16 times higher than the baking temperature for the temperature range studied. Both the T g and the shrinkage temperature were affected by the baking time. The thermal expansion coefficients (TEC), including the volumetric TEC (α v ), the in-plane TEC (α 1 ) and the out-of-plane TEC (α 2 ), were measured by a pressure–volume–temperature (PVT) apparatus and thermal–mechanical analyzer (TMA). Great residual stress could be generated during the process, and the change in residual stress with the environmental humidity was investigated using vibrational holographic interferometry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SU-8: a low-cost negative resist for MEMS
Lorenz, H., Despont, M., Fahrni, N., LaBianca, N., Renaud, P., & Vettiger, P. (1997) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/7/3/010 · Cited by 979
Negative photoresists for optical lithography
Shaw, J. M., Gelorme, J. D., LaBianca, N. C., Conley, W. E., & Holmes, S. J. (1997) · IBM Journal of Research and Development · doi:10.1147/rd.411.0081 · Cited by 345
Cited by
New materials for micro-scale sensors and actuators
Wilson, S. A., Jourdain, R. P. J., Zhang, Q., Dorey, R. A., Bowen, C. R., Willander, M., Wahab, Q. U., Willander, M., Al-hilli, S. M., Nur, O., et al. (2007) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.03.001 · Cited by 514
Shape-Programmed Folding of Stimuli-Responsive Polymer Bilayers
Stoychev, G., Zakharchenko, S., Turcaud, S., Dunlop, J. W. C., & Ionov, L. (2012) · ACS Nano · doi:10.1021/nn300079f · Cited by 266
SU‐8 2000 rendered cytocompatible for neuronal bioMEMS applications
Vernekar, V. N., Cullen, D. K., Fogleman, N., Choi, Y., García, A. J., Allen, M. G., Brewer, G. J., & LaPlaca, M. C. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31839 · Cited by 57
Photo–cross-linkable, insulating silk fibroin for bioelectronics with enhanced cell affinity
Ju, J., Hu, N., Cairns, D. M., Liu, H., & Timko, B. P. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2003696117 · Cited by 42
Metadata
- Authors
- Feng, R., & Farris, R. J.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2002-12-02
- Volume
- 13
- Issue
- 1
- Pages
- 80-88
- ISSN
- 0960-1317 (ISSN-L)
- OpenAlex
- W2101243746
- Cited by
- 359
- References
- 2
- FWCI
- 7.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings. https://app.cochat.ai/papers/10.1088/0960-1317/13/1/312
- The paper
- Feng, R., & Farris, R. J. (2003). Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/13/1/312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.