The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Control of the wetting properties of an AISI 316L stainless steel surface by femtosecond laser-induced surface modification
Abstract
A simple and effective method without vacuum to control the wetting properties of AISI 316L stainless steel using femtosecond laser pulses at high repetition rate has been developed. Both hydrophilic and hydrophobic surfaces were formed by creating micro-conical structures on the surface with femtosecond laser irradiation in air. The scan speed was found to be an effective parameter in controlling micro-cone morphology, size and number densities and contact angles during surface wettability experiments. It was found during surface wettability experiments that the contact angle of water varied from 0° (superhydrophilic) to 113° on laser micro-cone textured surfaces depending on processing conditions. Additionally, a superhydrophobic AISI 316L stainless steel surface was created (contact angle ∼150°) with a functionalized silane coating on already hydrophobic surface geometry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Cited by
Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining
Ahmmed, K., Grambow, C., & Kietzig, A.-M. (2014) · Micromachines · doi:10.3390/mi5041219 · Cited by 466
Bekmurzayeva, A., Duncanson, W. J., Azevedo, H. S., & Kanayeva, D. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.08.049 · Cited by 284
Samanta, A., Wang, Q., Shaw, S. K., & Ding, H. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108744 · Cited by 275
Metadata
- Authors
- Kam, D. H., Bhattacharya, S., & Mazumder, J.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2012-08-28
- Volume
- 22
- Issue
- 10
- Pages
- 105019
- ISSN
- 0960-1317 (ISSN-L)
- 1361-6439
- OpenAlex
- W2065160362
- Cited by
- 161
- References
- 1
- FWCI
- 2.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Control of the wetting properties of an AISI 316L stainless steel surface by femtosecond laser-induced surface modification. https://app.cochat.ai/papers/10.1088/0960-1317/22/10/105019
- The paper
- Kam, D. H., Bhattacharya, S., & Mazumder, J. (2012). Control of the wetting properties of an AISI 316L stainless steel surface by femtosecond laser-induced surface modification. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/22/10/105019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.