The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Ionic polymer metal composites: II. Manufacturing techniques
Open accessAbstract
This paper, the second in a series of four review papers to appear in this journal, presents a detailed description of various techniques and experimental procedures in manufacturing ionic polymer–metal composites (IPMCs) that, if fully developed, can be used as effective biomimetic sensors, actuators and artificial muscles as well as fully electroded with embedded electrodes for fuel cells. The performance of IPMCs manufactured by different manufacturing techniques are presented and compared. In particular, a number of issues such as force optimization using the Taguchi design of experiment technique, effects of different cations on electromechanical performance of IPMCs, electrode and particle size and distribution control, manufacturing cost minimization approaches, scaling and three-dimensional (3D) muscle production issues and heterogeneous composites by physical loading techniques are also reviewed and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ionic polymer-metal composites: I. Fundamentals
Shahinpoor, M., & Kim, K. J. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/4/327 · Cited by 1,126
Self-citationShahinpoor, M., Bar-Cohen, Y., Simpson, J. O., & Smith, J. (1998) · Smart Materials and Structures · doi:10.1088/0964-1726/7/6/001 · Cited by 1,021
Self-citationMechanoelectric effects in ionic gels
Gennes, P. G. D., Okumura, K., Shahinpoor, M., & Kim, K. J. (2000) · Europhysics Letters (EPL) · doi:10.1209/epl/i2000-00299-3 · Cited by 333
Self-citationKim, K. (2002) · Polymer · doi:10.1016/s0032-3861(01)00648-6 · Cited by 308
Self-citationShahinpoor, M., & Kim, K. J. (2000) · Smart Materials and Structures · doi:10.1088/0964-1726/9/4/318 · Cited by 283
Self-citation(1977) · Elsevier eBooks · doi:10.1016/b978-0-12-235050-4.x5001-1 · Cited by 279
Asaka, K., Oguro, K., Nishimura, Y., Mizuhata, M., & Takenaka, H. (1995) · Polymer Journal · doi:10.1295/polymj.27.436 · Cited by 249
Structure and related properties of solution-cast perfluorosulfonated ionomer films
Gebel, G., Aldebert, P., & Pineri, M. (1987) · Macromolecules · doi:10.1021/ma00172a049 · Cited by 238
Solid polymer electrolyte water electrolysis
TAKENAKA, H., TORIKAI, E., KAWAMI, Y., & WAKABAYASHI, N. (1982) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(82)90050-7 · Cited by 226
New solid polymer electrolyte composites for water electrolysis
Millet, P., Pineri, M., & Durand, R. (1989) · Journal of Applied Electrochemistry · doi:10.1007/bf01062295 · Cited by 176
Cited by
Artificial Muscles: Mechanisms, Applications, and Challenges
Mirvakili, S. M., & Hunter, I. W. (2018) · Advanced Materials · doi:10.1002/adma.201704407 · Cited by 1,077
Mirfakhrai, T., Madden, J. D. W., & Baughman, R. H. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70048-2 · Cited by 933
Ionic polymer–metal composites: IV. Industrial and medical applications
Shahinpoor, M., & Kim, K. J. (2005) · Smart Materials and Structures · doi:10.1088/0964-1726/14/1/020 · Cited by 614
Self-citationShahinpoor, M., & Kim, K. J. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/6/009 · Cited by 379
Self-citationMeng, H., & Hu, J. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x10369718 · Cited by 254
Metadata
- Authors
- Kim, K. J., & Shahinpoor, M.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2003-01-10
- Volume
- 12
- Issue
- 1
- Pages
- 65-79
- ISSN
- 0964-1726 (ISSN-L)
- OpenAlex
- W2078847656
- Cited by
- 584
- References
- 11
- FWCI
- 15.37
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ionic polymer metal composites: II. Manufacturing techniques. https://app.cochat.ai/papers/10.1088/0964-1726/12/1/308
- The paper
- Kim, K. J., & Shahinpoor, M. (2003). Ionic polymer metal composites: II. Manufacturing techniques. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/12/1/308
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
