Simulation investigation of effects of substrate and thermal boundary resistance on performances of AlGaN/GaN HEMTs
Open accessThe DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
The temperature distributions and thermal resistances of the GaN HEMTs fabricated on different substrates (sapphire, Si, SiC and diamond) with Mo/Au interlayers were calculated and analyzed by numerical simulation. The results show that the GaN HEMT on the diamond substrate exhibits the lowest channel temperature and thermal resistance, and the thermal resistance rises with the increase of the thermal boundary resistance (TBR) for all the GaN HEMTs with the different substrate materials. Meanwhile, the high TBR (2 × 10−7 m 2·K/W) severely hinders the heat exchange between the GaN layer and the substrate, which makes it difficult for the heat flux to pass through the barrier. Even diamond with high thermal conductivity can hardly reduce the channel temperature of the device. Therefore, TBR must be reduced so that the heat flux can be dissipated through a high thermal conductivity substrate. In addition, the Mo/Au interlayer generates a lower thermal boundary resistance, which has little effect on the channel temperature, thermal resistance and interfacial temperature discontinuity of GaN HEMTs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“GaN-on-Diamond offers exceptional thermal conductivity, but a high TBR can be performance-limiting, motivating measures such as via-hole insertion [7,8,83].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [8]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
GaN-Based RF Power Devices and Amplifiers
Mishra, U. K., Likun, S., Kazior, T. E., & Wu, Y.-F. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2007.911060 · Cited by 1,828
Interfacial thermal resistance: Past, present, and future
Chen, J., Xu, X., Zhou, J., & Li, B. (2022) · Reviews of Modern Physics · doi:10.1103/revmodphys.94.025002 · Cited by 735
AlGaN/GaN high electron mobility transistors with InGaN back-barriers
Palacios, T., Chakraborty, A., Heikman, S., Keller, S., DenBaars, S. P., & Mishra, U. K. (2006) · IEEE Electron Device Letters · doi:10.1109/led.2005.860882 · Cited by 393
Undoped AlGaN/GaN HEMTs for microwave power amplification
Eastman, L. F., Tilak, V., Smart, J., Green, B. M., Chumbes, E. M., Dimitrov, R., Kim, H., Ambacher, O. S., Weimann, N., Prunty, T., et al. (2001) · IEEE Transactions on Electron Devices · doi:10.1109/16.906439 · Cited by 389
40-W/mm Double Field-plated GaN HEMTs
Wu, Y.-F., Moore, M., Saxler, A., Wisleder, T., & Parikh, P. (2006) · 2006 64th Device Research Conference · doi:10.1109/drc.2006.305162 · Cited by 352
Thermal Boundary Resistance Between GaN and Substrate in AlGaN/GaN Electronic Devices
Sarua, A., Ji, H., Hilton, K. P., Wallis, D. J., Uren, M. J., Martin, T., & Kuball, M. (2007) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2007.908874 · Cited by 304
Kanamura, M., Ohki, T., Kikkawa, T., Imanishi, K., Imada, T., Yamada, A., & Hara, N. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2009.2039026 · Cited by 293
Cheng, Z., Mu, F., Yates, L., Suga, T., & Graham, S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16959 · Cited by 241
Kuzmik, J., Javorka, R., Alam, A., Marso, M., Heuken, M., & Kordos, P. (2002) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2002.801430 · Cited by 214
Pomeroy, J. W., Bernardoni, M., Dumka, D. C., Fanning, D. M., & Kuball, M. (2014) · Applied Physics Letters · doi:10.1063/1.4865583 · Cited by 192
Research works printed but not linked: 2
- Dumka, 2013, AlGaN/GaN HEMTs on diamond substrate with over 7 W/mm output power density at 10 GHz Electron, Lett., 49, 1298
- Kanamura, 2010, Enhancement-mode GaN MIS-HEMTs with n-GaN/i-AlN/n-GaN triple cap layer and high-k gate dielectrics, IEEE Electron Device Lett., 31, 189, 10.1109/led.2009.2039026 · DOI · Paper page
Cited by
Han, G., Kim, J., Park, S., & Bae, W. (2025) · Electronics · doi:10.3390/electronics14214193 · Cited by 34
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and inter-facial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
Wang, L., Zhang, Z., Su, X., Zhou, J., Chen, J., Li, Z., Chang, G., Xia, S., Yin, T., Niu, M., et al. (2024) · Applied Surface Science · doi:10.1016/j.apsusc.2024.162106 · Cited by 19
Luo, Q., Fan, Z.-Q., Wu, D., Xie, Z.-X., & Chen, K. (2025) · Journal of Physics Condensed Matter · doi:10.1088/1361-648x/ae22b0 · Cited by 9
Interface-Driven Electrothermal Degradation in GaN-on-Diamond High Electron Mobility Transistors
Wang, H., Liu, Y., Dong, X., Ullah, A., Sun, J., Zhang, C., Xiong, Y., Gu, P., Ge, C., & Liu, X. (2025) · Nanomaterials · doi:10.3390/nano15141114 · Cited by 6
“These findings are consistent with previous studies on the effects of substrate materials in device reliability and efficiency [34,52].”
Self-citationResolving Lateral Heat Transport in GaN‐on‐SiC HEMT Structures via Transient Thermometry
Tran, D. Q., Kristensen, T., Soman, R., Malakoutian, M., Paskova, T., Rorsman, N., Thorsell, M., Chowdhury, S., & Darakchieva, V. (2026) · Advanced Materials Technologies · doi:10.1002/admt.71327
Metadata
- Authors
- Wang, K., Hu, W., Wu, S., Wang, H., Padhiar, M. A., & Ji, Y.
- Affiliations
- Xianyang Polytechnic Institute (CN)
- Xi'an Jiaotong University (CN)
- Guangzhou University (CN)
- Peking University (CN)
- Corresponding author
- Wang, Kang
- Wang, Hongxing
- Venue
- Physica Scripta
- Publisher
- IOP Publishing
- Published
- 2024-05-24
- Volume
- 99
- Issue
- 6
- Pages
- 065554
- ISSN
- 0031-8949 (ISSN-L)
- 1402-4896
- OpenAlex
- W4396883163
- Cited by
- 5
- References
- 46
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 1
- FWCI
- 0.72
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- Locations
- Physica Scripta (publishedVersion)
- Funders
- Research Funds of XianYang Vocational & Technical College (No.2022BK04)
- National Natural Science Foundation of China (52303335)
- China Postdoctoral Science Foundation (2023M730099)
- Topics
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Keywords
- AlGaN/GaN HEMT, interfacial thermal resistance, substrate effects, thermal resistance, channel temperature, diamond substrates, sapphire substrate, silicon substrate, SiC substrate, heat dissipation, thermal conductivity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Simulation investigation of effects of substrate and thermal boundary resistance on performances of AlGaN/GaN HEMTs. https://app.cochat.ai/papers/10.1088/1402-4896/ad4b69
- The paper
- Wang, K., Hu, W., Wu, S., Wang, H., Padhiar, M. A., & Ji, Y. (2024). Simulation investigation of effects of substrate and thermal boundary resistance on performances of AlGaN/GaN HEMTs. Physica Scripta. https://doi.org/10.1088/1402-4896/ad4b69
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.