The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Laser printing of cells into 3D scaffolds
Abstract
One of the most promising approaches in tissue engineering is the application of 3D scaffolds, which provide cell support and guidance in the initial tissue formation stage. The porosity of the scaffold and internal pore organization influence cell migration and play a major role in its biodegradation dynamics, nutrient diffusion and mechanical stability. In order to control cell migration and cellular interactions within the scaffold, novel technologies capable of producing 3D structures in accordance with predefined design are required. The two-photon polymerization (2PP) technique, used in this report for the fabrication of scaffolds, allows the realization of arbitrary 3D structures with submicron spatial resolution. Highly porous 3D scaffolds, produced by 2PP of acrylated poly(ethylene glycol), are seeded with cells by means of laser-induced forward transfer (LIFT). In this laser printing approach, a propulsive force, resulting from laser-induced shock wave, is used to propel individual cells or cell groups from a donor substrate towards the receiver substrate. We demonstrate that with this technique printing of multiple cell types into 3D scaffolds is possible. Combination of LIFT and 2PP provides a route for the realization of 3D multicellular tissue constructs and artificial ECM engineered on the microscale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hutmacher, D. W. (2001) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856201744489 · Cited by 1,409
Recent advances in three‐dimensional multicellular spheroid culture for biomedical research
Lin, R., & Chang, H. (2008) · Biotechnology Journal · doi:10.1002/biot.200700228 · Cited by 1,264
A Blood Vessel Model Constructed from Collagen and Cultured Vascular Cells
Weinberg, C. B., & Bell, E. (1986) · Science · doi:10.1126/science.2934816 · Cited by 1,240
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
The role of bioreactors in tissue engineering
Martin, I., Wendt, D., & Heberer, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2003.12.001 · Cited by 1,215
Aligned biodegradable nanofibrous structure: a potential scaffold for blood vessel engineering
Xu, C. Y., Inai, R., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00593-3 · Cited by 1,213
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Traktuev, D. O., Merfeld-Clauss, S., Li, J., Kolonin, M., Arap, W., Pasqualini, R., Johnstone, B. H., & March, K. L. (2008) · Circulation Research · doi:10.1161/circresaha.107.159475 · Cited by 839
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Mann, B. K., Gobin, A. S., Tsai, A. T., Schmedlen, R. H., & West, J. L. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00051-5 · Cited by 704
Cited by
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Metadata
- Authors
- Ovsianikov, A., Gruene, M., Pflaum, M., Koch, L., Maiorana, F., Wilhelmi, M., Haverich, A., & Chichkov, B.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2010-03-01
- Volume
- 2
- Issue
- 1
- Pages
- 014104
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2017165576
- Cited by
- 266
- References
- 36
- FWCI
- 8.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laser printing of cells into 3D scaffolds. https://app.cochat.ai/papers/10.1088/1758-5082/2/1/014104
- The paper
- Ovsianikov, A., Gruene, M., Pflaum, M., Koch, L., Maiorana, F., Wilhelmi, M., Haverich, A., & Chichkov, B. (2010). Laser printing of cells into 3D scaffolds. Biofabrication. https://doi.org/10.1088/1758-5082/2/1/014104
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.