The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Open accessAbstract
The aim of this study was to explore the lower resolution limits of an electrohydrodynamic process combined with direct writing technology of polymer melts. Termed melt electrospinning writing, filaments are deposited layer-by-layer to produce discrete three-dimensional scaffolds for in vitro research. Through optimization of the parameters (flow rate, spinneret diameter, voltage, collector distance) for poly-ϵ-caprolactone, we could direct-write coherent scaffolds with ultrafine filaments, the smallest being 817 ± 165 nm. These low diameter filaments were deposited to form box-structures with a periodicity of 100.6 ± 5.1 μm and a height of 80 μm (50 stacked filaments; 100 overlap at intersections). We also observed oriented crystalline regions within such ultrafine filaments after annealing at 55 °C. The scaffolds were printed upon NCO-sP(EO-stat-PO)-coated glass slide surfaces and withstood frequent liquid exchanges with negligible scaffold detachment for at least 10 days in vitro.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Taylor, G. I. (1969) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1969.0205 · Cited by 1,524
Characterization of cells with osteogenic potential from human marrow
Haynesworth, S. E., Goshima, J., Goldberg, V. M., & Caplan, A. I. (1992) · Bone · doi:10.1016/8756-3282(92)90364-3 · Cited by 1,289
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,070
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Self-citationSun, D., Chang, C., Li, S., & Lin, L. (2006) · Nano Letters · doi:10.1021/nl0602701 · Cited by 748
Townsend-Nicholson, A., & Jayasinghe, S. N. (2006) · Biomacromolecules · doi:10.1021/bm060649h · Cited by 461
Cited by
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Poly(2-oxazoline)s based biomaterials: a comprehensive and critical update
Lorson, T., Lübtow, M. M., Wegener, E., Haider, M. S., Borova, S., Nahm, D., Jordan, R., Sokolski-Papkov, M., Kabanov, A. V., & Luxenhofer, R. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.05.022 · Cited by 391
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 334
Metadata
- Authors
- Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2015-06-12
- Volume
- 7
- Issue
- 3
- Pages
- 035002
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W1533861502
- Cited by
- 385
- References
- 36
- FWCI
- 11.48
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing. https://app.cochat.ai/papers/10.1088/1758-5090/7/3/035002
- The paper
- Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J. (2015). Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing. Biofabrication. https://doi.org/10.1088/1758-5090/7/3/035002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.