The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
A bioprintable form of chitosan hydrogel for bone tissue engineering
Open accessAbstract
Bioprinting can be defined as 3D patterning of living cells and other biologics by filling and assembling them using a computer-aided layer-by-layer deposition approach to fabricate living tissue and organ analogs for tissue engineering. The presence of cells within the ink to use a 'bio-ink' presents the potential to print 3D structures that can be implanted or printed into damaged/diseased bone tissue to promote highly controlled cell-based regeneration and remineralization of bone. In this study, it was shown for the first time that chitosan solution and its composite with nanostructured bone-like hydroxyapatite (HA) can be mixed with cells and printed successfully. MC3T3-E1 pre-osteoblast cell laden chitosan and chitosan-HA hydrogels, which were printed with the use of an extruder-based bioprinter, were characterized by comparing these hydrogels to alginate and alginate-HA hydrogels. Rheological analysis showed that all groups had viscoelastic properties. It was also shown that under simulated physiological conditions, chitosan and chitosan-HA hydrogels were stable. Also, the viscosity values of the bio-solutions were in an applicable range to be used in 3D bio-printers. Cell viability and proliferation analyses documented that after printing with bio-solutions, cells continued to be viable in all groups. It was observed that cells printed within chitosan-HA composite hydrogel had peak expression levels for early and late stages osteogenic markers. It was concluded that cells within chitosan and chitosan-HA hydrogels had mineralized and differentiated osteogenically after 21 days of culture. It was also discovered that chitosan is superior to alginate, which is the most widely used solution preferred in bioprinting systems, in terms of cell proliferation and differentiation. Thus, applicability and printability of chitosan as a bio-printing solution were clearly demonstrated. Furthermore, it was proven that the presence of bone-like nanostructured HA in alginate and chitosan hydrogels improved cell viability, proliferation and osteogenic differentiation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Collagen/chitosan porous scaffolds with improved biostability for skin tissue engineering
Ma, L., Gao, C., Mao, Z., Zhou, J., Shen, J., Hu, X., & Han, C. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00374-0 · Cited by 1,054
Zhang, Y., Venugopal, J. R., El-Turki, A., Ramakrishna, S., Su, B., & Lim, C. T. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.07.038 · Cited by 702
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Rheological characterisation of thermogelling chitosan/glycerol-phosphate solutions
Chenite, A. (2001) · Carbohydrate Polymers · doi:10.1016/s0144-8617(00)00281-2 · Cited by 548
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Glycerophosphate-based chitosan thermosensitive hydrogels and their biomedical applications
Zhou, H. Y., Jiang, L. J., Cao, P. P., Li, J. B., & Chen, X. G. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.09.094 · Cited by 397
Mesenchymal stem cell ingrowth and differentiation on coralline hydroxyapatite scaffolds
Mygind, T., Stiehler, M., Baatrup, A., Li, H., Zou, X., Flyvbjerg, A., Kassem, M., & Bünger, C. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.10.003 · Cited by 378
Bioprinting scale-up tissue and organ constructs for transplantation
Ozbolat, I. T. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.04.005 · Cited by 350
Kong, L., Gao, Y., Lu, G., Gong, Y., Zhao, N., & Zhang, X. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.08.009 · Cited by 331
Lin, H., & Yeh, Y. (2004) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30065 · Cited by 303
Towards artificial tissue models: past, present, and future of 3D bioprinting
Arslan-Yildiz, A., Assal, R. E., Chen, P., Guven, S., Inci, F., & Demirci, U. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014103 · Cited by 301
Almeida, C. R., Serra, T., Oliveira, M. I., Planell, J. A., Barbosa, M. A., & Navarro, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.035 · Cited by 290
Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system
Ang, T. H., Sultana, F. S. A., Hutmacher, D. W., Wong, Y. S., Fuh, J. Y. H., Mo, X. M., Loh, H. T., Burdet, E., & Teoh, S. H. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00010-3 · Cited by 278
Pablo Rodríguez, J., González, M., Ríos, S., & Cambiazo, V. (2004) · Journal of Cellular Biochemistry · doi:10.1002/jcb.20234 · Cited by 276
Dhivya, S., Saravanan, S., Sastry, T. P., & Selvamurugan, N. (2015) · Journal of Nanobiotechnology · doi:10.1186/s12951-015-0099-z · Cited by 263
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
Kuo, C. K., & Ma, P. X. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31375 · Cited by 228
Domke, J., Dannöhl, S., Parak, W. J., Müller, O., Aicher, W. K., & Radmacher, M. (2000) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/s0927-7765(00)00145-4 · Cited by 190
Neufurth, M., Wang, X., Schröder, H. C., Feng, Q., Diehl-Seifert, B., Ziebart, T., Steffen, R., Wang, S., & Müller, W. E. G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.07.002 · Cited by 185
Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology
Li, S., Xiong, Z., Wang, X., Yan, Y., Liu, H., & Zhang, R. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509104094 · Cited by 180
Gurkan, U. A., El Assal, R., Yildiz, S. E., Sung, Y., Trachtenberg, A. J., Kuo, W. P., & Demirci, U. (2014) · Molecular Pharmaceutics · doi:10.1021/mp400573g · Cited by 178
Moreira, C. D. F., Carvalho, S. M., Mansur, H. S., & Pereira, M. M. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.09.075 · Cited by 175
Additive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
Jang, J., Seol, Y.-J., Kim, H. J., Kundu, J., Kim, S. W., & Cho, D.-W. (2014) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.05.004 · Cited by 166
Hao, T., Wen, N., Cao, J., Wang, H.-B., Lu, S. Z., Liu, T., Lin, Q.-X., Duan, C., & Wang, C.-Y. (2009) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2009.08.007 · Cited by 156
Zhang, L. G., Im, O., Li, J. H., & Keidar, M. (2012) · International Journal of Nanomedicine · doi:10.2147/ijn.s29743 · Cited by 152
Mironov, V. A., Prestwich, G. D., & Forgács, G. (2007) · Journal of Materials Chemistry · doi:10.1039/b617903g · Cited by 130
Direct writing of chitosan scaffolds using a robotic system
Li, G., Feng, W., Hutmacher, D. W., Wong, Y. S., Loh, H. T., & Fuh, J. Y. H. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510589458 · Cited by 125
Bone-like hydroxyapatite precipitated from 10×SBF-like solution by microwave irradiation
Demirtaş, T. T., Bayrak, G. K., & Gümüşderelı́oğlu, M. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.01.057 · Cited by 92
Self-citationBiochemical Markers of Bone Formation
Gundberg, C. M. (2000) · Clinics in Laboratory Medicine · doi:10.1016/s0272-2712(18)30049-0 · Cited by 81
Osteocalcin-Controlled Dissolution−Reprecipitation of Calcium Phosphate under Biomimetic Conditions
Flade, K., Lau, C., Mertig, M., & Pompe, W. (2001) · Chemistry of Materials · doi:10.1021/cm011063z · Cited by 75
bFGF‐loaded HA‐chitosan: A promising scaffold for periodontal tissue engineering
Akman, A. C., Tığlı, R. S., Gümüşderelı́oğlu, M., & Nohutçu, R. M. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32428 · Cited by 70
Beşkardeş, I. G., Demirtaş, T. T., Durukan, M. D., & Gümüşderelíoğlu, M. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1677 · Cited by 68
Self-citationLiu, I.-H., Chang, S., & Lin, H. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/035004 · Cited by 62
Gel–sol–gel thermo-gelation behavior study of chitosan–inorganic phosphate solutions
Li, X., Kong, X., Wang, X., Shi, S., Guo, G. F., Luo, F., Zhao, X., Wei, Y., & Qian, Z. (2010) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2010.04.015 · Cited by 44
Irmak, G., Demirtaş, T. T., Altındal, D. Ç., Çalış, M., & Gümüşderelı́oğlu, M. (2014) · Cells Tissues Organs · doi:10.1159/000362362 · Cited by 34
Self-citationChondrogenesis on BMP‐6 loaded chitosan scaffolds in stationary and dynamic cultures
Tığlı, R. S., & Gümüşderelíoğlu, M. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22426 · Cited by 25
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661
“reported MC3T3-E1 pre-osteoblastic cellladen chitosan and chitosan-HA hydrogels were produced via extrusionbased 3D printing [53].”
MethodHydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Metadata
- Authors
- Demirtaş, T. T., Irmak, G., & Gümüşderelioğlu, M.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2017-07-13
- Volume
- 9
- Issue
- 3
- Pages
- 035003
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2647062254
- Cited by
- 376
- References
- 41
- FWCI
- 15.13
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.