The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
3D printing of complex GelMA-based scaffolds with nanoclay
Open accessAbstract
Photo-crosslinkable gelatin methacrylate (GelMA) has become an attractive ink in 3D printing due to its excellent biological performance. However, limited by low viscosity and long cross-linking time, it is still a challenge to directly print GelMA by extrusion-based 3D printing. Here, to balance the printability and biocompatibility, biomaterial ink composed of GelMA and nanoclay was specially designed. Using this ink, complex scaffolds with high shape fidelity can be easily printed based on the thixotropic property of nanoclay. In this study, we tried to answer some basic printing-required questions of this ink, including the printability window, general properties (porosity, mechanical strength, et al), and biocompatibility. We found that the GelMA/Nanoclay ink enabled printing complex 3D scaffolds, such as a bionic ear and a branched vessel. Furthermore, the addition of nanoclay improved the porosity, increased the mechanical strength, reduced the degradation ratio, and maintained a good biocompatibility of the printed scaffolds. Therefore, this method offers an easy way to print complex scaffolds with good shape fidelity and biological performance, and it might open up new potential applications for the customized therapy of tissue defects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Self-citationDevelopment of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
Self-citationFundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Gelatin methacryloyl hydrogel, from standardization, performance, to biomedical application
He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300395 · Cited by 275
Self-citation
Metadata
- Authors
- Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J., Liu, Y., & He, Y.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2019-04-05
- Volume
- 11
- Issue
- 3
- Pages
- 035006
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2922147290
- Cited by
- 242
- References
- 5
- FWCI
- 10.37
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printing of complex GelMA-based scaffolds with nanoclay. https://app.cochat.ai/papers/10.1088/1758-5090/ab0cf6
- The paper
- Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J., Liu, Y., & He, Y. (2019). 3D printing of complex GelMA-based scaffolds with nanoclay. Biofabrication. https://doi.org/10.1088/1758-5090/ab0cf6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.