The DOI matches its Crossref record; 93 of the 93 references it cites were found in a registry or an index.
Assessment methodologies for extrusion-based bioink printability
Open accessAbstract
Extrusion-based bioprinting is one of the leading manufacturing techniques for tissue engineering and regenerative medicine. Its primary limitation is the lack of materials, known as bioinks, which are suitable for the bioprinting process. The degree to which a bioink is suitable for bioprinting has been described as its ‘printability.’ However, a lack of clarity surrounding the methodologies used to evaluate a bioink’s printability, as well as the usage of the term itself, have hindered the field. This article presents a review of measures used to assess the printability of extrusion-based bioinks in an attempt to assist researchers during the bioink development process. Many different aspects of printability exist and many different measurements have been proposed as a consequence. Researchers often do not evaluate a new bioink’s printability at all, while others simply do so qualitatively. Several quantitative measures have been presented for the extrudability, shape fidelity, and printing accuracy of bioinks. Different measures have been developed even within these aspects, each testing the bioink in a slightly different way. Additionally, other relevant measures which had little or no examples of quantifiable methods are also to be considered. Looking forward, further work is needed to improve upon current assessment methodologies, to move towards a more comprehensive view of printability, and to standardize these printability measurements between researchers. Better assessment techniques will naturally lead to a better understanding of the underlying mechanisms which affect printability and better comparisons between bioinks. This in turn will help improve upon the bioink development process and the bioinks available for use in bioprinting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Among the available techniques, extrusion-based bioprinting is the most widely used owing to its versatility and compatibility with hydrogel-based bioinks [4,5,6].”
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Although the spreading ratio (Figure 6D) tended to decrease with increasing MMT concentration, no statistically significant differences were observed among the formulations (one-way ANOVA, p = 0.117) [6,7].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [6]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Self-citation25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,818
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D. M., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,168
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Vlierberghe, S. V., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,129
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. M. Q. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,073
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,052
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,005
Research works printed but not linked: 2
- Kraut, 2017, Influence of shear thinning and material flow on robotic dispensing of poly(ethylene glycol) diacrylate/poloxamer 407 hydrogels, J. Appl. Polym. Sci., 134, 45083, 10.1002/app.45083 · DOI
- Sarker, 2017, Modeling the flow behavior and flow rate of medium viscosity alginate for scaffold fabrication with a three-dimensional bioplotter, J. Manuf. Sci. Eng., 139, 081002, 10.1115/1.4036226 · DOI
Cited by
Sorted by citations
Items 201–300 of 424
Arıcı, Ş., Kamali, A. R., & Ege, D. (2024) · Biofabrication · doi:10.1088/1758-5090/ad8e87 · Cited by 15
Organic nanomaterials applied to the manufacturing of personalized future 3D-printed foods: A review
Guo, Q. Q., Zhang, M., MUJUMDAR, A. S., & Li, C. (2024) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2024.104835 · Cited by 15
Kadousaraei, M. J., Yamada, S., Aydin, M. S., Rashad, A., Molina, N., Mohamed‐Ahmed, S., Gjerde, C., Malkoch, M., & Mustafa, K. B. E. (2025) · Scientific Reports · doi:10.1038/s41598-025-90389-2 · Cited by 23
Recent advances in 3D cell culture models in cancer drug development
Sol, Y., Michaels, A., Wang, J. Z., Niu, Y., Lin, Y., Zhu, L., Zhu, X., Wang, K., Murray, M. T., & Zhou, F. (2025) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-025-00740-y · Cited by 17
Fabrication Strategies for Engineered Thin Membranous Tissues
McLoughlin, S. T., McKenna, A. R., & Fisher, J. P. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00133 · Cited by 14
Self-citationFrom Single‐Compartment Artificial Cells to Tissue‐Like Materials
Westensee, I. N., Andres, P. D. D., & Städler, B. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202301804 · Cited by 14
Muti-interactions based 3D-printed osteochondral biomimetic scaffold for BMP-2 sustained release
Wu, Z., Sun, H., Hu, X. Y., Yang, J., Gu, Z., Wang, C., Chong, H., Dai, J., Yao, H., & Wang, D. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113343 · Cited by 14
Jafari, T., Naghib, S. M., Rahmanian, M., & Mozafari, M. R. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00353 · Cited by 14
Shinkar, K., & Rhode, K. (2022) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2022.100066 · Cited by 17
3D Bioprinted Neural Tissues: Emerging Strategies for Regeneration and Disease Modeling
Choi, T., Park, J., Lee, S.-Y., Jeon, H., Kim, B. H., Kim, H., & Lee, H. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17091176 · Cited by 16
Self-citationModified Polysaccharides: Potential Biomaterials for Bioprinting
Jiang, T., Yang, Y. K., Lin, Z., Yang, H., & Luo, Z. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16090338 · Cited by 18
Vel, R., Bhatt, A., Priyanka, A., Gauthaman, A., Anilkumar, V., Safeena, A. S., & Ranjith, S. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104335 · Cited by 14
Engineering tools for stimulating wound healing
Lazarus, E., Barnum, L., Ramesh, S., Quint, J. P., Samandari, M., Laflamme, S., Secord, T. W., Schmidt, T. A., Tamayol, A., & Rivero, I. V. (2024) · Applied Physics Reviews · doi:10.1063/5.0173663 · Cited by 16
Ghosh, A., Bera, A. K., Singh, V., Basu, S., & Pati, F. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214007 · Cited by 14
3D bioprinting technology for modeling vascular diseases and its application
Kim, J.-E., Jeong, G., Yoo, Y. M., Bhang, S. H., Kim, J. H., Shin, Y. M., Yoo, K. H., Lee, B., Baek, W., Heo, D. N., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/adc03a · Cited by 14
Batul, R., Ismat, M. S., Nawaz, M. H., Gillani, S. M. H., Aizaz, A., Khan, A., Shafique, H., Mudassir, M. S., Ahmed, S., Javed, F. T., et al. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107022 · Cited by 13
Advances in 3D Printed Scaffolds for Periodontal Regeneration
Daghrery, A., Soares, I. P. M., dos Reis‐Prado, A. H., Araújo, I. J. D. S., Dal‐Fabbro, R., & Bottino, M. C. (2026) · Current Oral Health Reports · doi:10.1007/s40496-025-00421-7 · Cited by 15
Santoni, S., Sponchioni, M., Gugliandolo, S. G., Colosimo, B. M., & Moscatelli, D. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.06.062 · Cited by 14
Ribeiro, R. D. C., Bom, S., Martins, A. M., Ribeiro, H. M., Santos, C. F., & Marto, J. M. (2023) · Drug Delivery and Translational Research · doi:10.1007/s13346-023-01294-y · Cited by 13
Three-dimensional bioprinting of in vitro tumor organoid and organ-on-a-chip models
Anderson, S. R., Stagner, E., Sivakumar, H., & Skardal, A. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00559-8 · Cited by 12
Hogan, K. J., Perez, M. R., Öztatlı, H., Si, S., Wang, Z., Jiang, E. Y., Diba, M., Gari̇pcan, B., & Mikos, A. G. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00317 · Cited by 12
Self-citationKamaraj, M., Datla, A., Moulton, S. E., & Rath, S. N. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02480 · Cited by 12
Resorbable conductive materials for optimally interfacing medical devices with the living
Sacchi, M., Sauter-Starace, F., Mailley, P., & Texier, I. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1294238 · Cited by 14
Lee, S., Son, M., Lee, J., Byun, I., Kim, J.-W., Kim, J., & Seonwoo, H. (2024) · Polymers · doi:10.3390/polym16081137 · Cited by 16
Self-citationGalocha-León, C., Antich, C., Voltes-Martínez, A., Marchal, J. A., Mallandrich, M., Halbaut, L., Souto, E. B., Gálvez‐Martín, P., & Clares, B. (2024) · Drug Delivery and Translational Research · doi:10.1007/s13346-024-01596-9 · Cited by 16
Decellularized cartilage tissue bioink formulation for osteochondral graft development
Golebiowska, A. A., Tan, M., Ma, A. W. K., & Nukavarapu, S. P. (2025) · Biomedical Materials · doi:10.1088/1748-605x/ada59d · Cited by 12
Tamo, A. K., Doench, I., Roshanbinfar, K., Montembault, A., Serghei, A., Engel, F. B., & Osorio‐Madrazo, A. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.05.014 · Cited by 14
Leveraging transfer learning for efficient bioprinting
Bracco, F., Zanderigo, G., Paynabar, K., & Colosimo, B. M. (2025) · Biofabrication · doi:10.1088/1758-5090/ade62f · Cited by 15
Torre, M., Giannitelli, S. M., Mauri, E., Gori, M., Bucciarelli, A., Mozetic, P., Gigli, G., Trombetta, M., & Rainer, A. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00262 · Cited by 14
Ouro, P., Costa, D. C. S., Amaral, A. J. R., & Mano, J. F. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300058 · Cited by 11
Kafili, G., Tamjid, E., Niknejad, H., & Simchi, A. (2024) · Cellulose · doi:10.1007/s10570-024-05797-w · Cited by 13
Chirianni, F., Vairo, G., & Marino, M. (2024) · Meccanica · doi:10.1007/s11012-024-01862-7 · Cited by 11
Development of printable bacterial nanocellulose bioinks for bioprinting applications
Grunberg, N., Mcmeeking, A., Dieckmann, E., & Cheeseman, C. R. (2024) · Biotechnology for Sustainable Materials · doi:10.1186/s44316-024-00015-w · Cited by 11
Korkeamäki, J. T., Rashad, A., Ojansivu, M., Karvinen, J., Koivisto, J. T., Syverud, K., Kellomäki, M., Miettinen, S., & Mustafa, K. (2025) · Biofabrication · doi:10.1088/1758-5090/ada63b · Cited by 12
Acoustofluidic bioassembly induced morphogenesis for therapeutic tissue fabrication
Kang, B., Jeong, E., Han, S. Y., Heo, J. H., Lee, Y., Choi, S., Choi, Y., Kang, D., Hwang, Y.-H., Lee, J., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-59026-4 · Cited by 14
Witkowska, K., Paczkowska‐Walendowska, M., Miklaszewski, A., Plech, T., Michniak‐Kohn, B. B., Swora-Cwynar, E., & Cielecka‐Piontek, J. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107143 · Cited by 12
Makuku, R., Werthel, J.-D., Zanjani, L. O., Nabian, M. H., & Tantuoyir, M. M. (2022) · Journal of International Medical Research · doi:10.1177/03000605221117212 · Cited by 11
Dalloul, F., Mietner, J. B., & Navarro, J. R. G. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c02065 · Cited by 11
Darwish, L. R., El-Wakad, M. T., & Farag, M. M. (2021) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4050824 · Cited by 11
Kumar, A., Brown, R. A., Benyamien-Roufaeil, D. S., Gupta, A., Lipford, E. L., Muthusamy, D., Zalzman, A., Hertzano, R. P., Lowe, T. L., Stains, J. P., et al. (2024) · Advanced Science · doi:10.1002/advs.202306683 · Cited by 10
mSLAb – An open-source masked stereolithography (mSLA) bioprinter
Kaufmann, B. K., Rudolph, M., Pechtl, M., Wildenburg, G., Hayden, O., Clausen‐Schaumann, H., & Sudhop, S. (2024) · HardwareX · doi:10.1016/j.ohx.2024.e00543 · Cited by 10
Kim, J., & Jang, J. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i1.643 · Cited by 10
Characterization of Peptide-Based Nanomaterials
Edwards‐Gayle, C. J. C., & Wychowaniec, J. K. (2023) · Springer eBooks · doi:10.1007/978-3-031-29360-3_8 · Cited by 10
Applying In Situ Ionic Crosslinking in Bioprinting Using Algae Cells
Rahman, T. T., Wood, N., Rahman, A. M., Pei, Z., & Qin, H. (2023) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4064221 · Cited by 10
Mirzababaei, S., Towery, L. A. K., & Kozminsky, M. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1347666 · Cited by 9
Feng, H., Song, Y., Lian, X., Zhang, S., Bai, J., Gan, F., Lei, Q., Wei, Y., & Huang, D. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01522 · Cited by 9
Bera, A. K., Rizvi, M. S., Vijayasankar, K. N., & Pati, F. (2024) · Biofabrication · doi:10.1088/1758-5090/ad86ec · Cited by 11
Shi, R., Cai, X., He, G., Guan, J., Liu, Y., Lu, H., Mao, Z., Li, Y., Guo, H., & Hai, Y. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.596 · Cited by 9
Balaji, K. V., Bhutoria, S., Nayak, S., Kumar, P. A., & Velayudhan, S. (2023) · Biomedical Engineering Advances · doi:10.1016/j.bea.2023.100083 · Cited by 9
Ratri, M. C., Brilian, A. I., Setiawati, A., Nguyen, H. T., Soum, V., & Shin, K. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202170053 · Cited by 9
Ouiyangkul, P., Hirun, N., Suknuntha, K., & Tantishaiyakul, V. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6206 · Cited by 9
Biomaterial ink based on bacterial polyglucuronic acid for tissue engineering applications
Shavandi, A., Hamidi, M., Okoro, O. V., Simińska‐Stanny, J., Hajiabbas, M., Ruiz, C., Petit, E., Elboutachfaiti, R., Nie, L., & Delattre, C. (2024) · Next Materials · doi:10.1016/j.nxmate.2024.100181 · Cited by 9
Single-Component Cellulose Acetate Sulfate Hydrogels for Direct Ink Writing 3D Printing
Park, S., Sharmin, T., Cho, S.-M., Kelley, S. S., Shirwaiker, R. A., & Park, S. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00578 · Cited by 8
Integrating 3D printing of biomaterials with nitric oxide release
de Almeida, H. V., Bomediano, M. P., Catori, D. M., Silva, E. H. C., & de Oliveira, M. G. (2025) · Biomaterials Science · doi:10.1039/d4bm01304b · Cited by 8
Torres-Ayala, L. K., Nakamatsu, J., & Kim, S. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05923-z · Cited by 8
Marin-Tapia, H. A., Romero-Salazar, L., Mayorga‐Rojas, M., & Arteaga‐Arcos, J. C. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202500276 · Cited by 8
Hájovská, P., Kroneková, Z., Cseriová, Z., Ház, A., Jančovičová, V., Danišovič, Ľ., Žiaran, S., Heydari, A., & Lacı́k, I. (2025) · ACS Omega · doi:10.1021/acsomega.5c05476 · Cited by 9
Picado-Tejero, D., Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macı́as-Garcı́a, A., & Marcos-Romero, A. C. (2026) · ACS Omega · doi:10.1021/acsomega.5c09668 · Cited by 10
Arduengo, J., Hascoët, N., Chinesta, F., & Hascoët, J.-Y. (2024) · Journal of Machine Engineering · doi:10.36897/jme/186044 · Cited by 8
Moon, S. H., Choi, G., Chi, H. J., & Yang, Y. J. (2024) · Biofabrication · doi:10.1088/1758-5090/ad3d8b · Cited by 9
Fazal, F., Melchels, F. P. W., McCormack, A., Silva, A. F., Callanan, A., Koutsos, V., & Radacsi, N. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.105665 · Cited by 8
DIW 3D Printing Aligned Catkins to Access Significant Enhanced Responsive Ionogel
Cao, P., Yang, J. H., Gong, J., Tao, L., Wang, T., Pei, X., Wang, Q., & Zhang, Y. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202301904 · Cited by 7
Challenges and perspectives in using finite element modeling to advance 3D bioprinting
Soufivand, A. A., Lee, S. J., Jüngst, T., & Budday, S. (2025) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/addb19 · Cited by 8
Self-citationRibbon-shaped microgels as bioinks for 3D bioprinting of anisotropic tissue structures
Lee, H. P., Tai, M., Jones, S., Tong, X., Kim, S. S., Jansman, M. M. T., Tam, T., Du, J., Skylar‐Scott, M. A., & Yang, F. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.12.040 · Cited by 8
Aloe vera‐based biomaterial ink for 3D bioprinting of wound dressing constructs
Ceballos‐Santa, M. C., Sierra, A., Martinez-Zalbidea, I., Lazarus, E., Marin‐Montealegre, V., Ramesh, S., Iglesias, P., Wuertz‐Kozak, K., & Rivero, I. V. (2024) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35379 · Cited by 8
Zidarič, T., Gradišnik, L., Frangež, T., Šoštarič, M., Korunič, E., Maver, T., & Maver, U. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131958 · Cited by 7
Lourenço, L. R., Borges, R., Carastan, D. J., Mathor, M. B., & Marchi, J. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00359 · Cited by 8
Bioink Printability Methodologies for Cell-Based Extrusion Bioprinting
Copus, J. S., Lee, S. J., & Atala, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824552-1.00013-x · Cited by 7
Self-citationPoerio, A., Mashanov, V. S., Lai, D., Kim, M. W. S., Ju, Y. M., Kim, J. H., Lee, S. J., Cleymand, F., Mano, J. F., Atala, A., et al. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00220 · Cited by 8
Self-citationKopecká, K., Vítková, L., Kroneková, Z., Musilová, L., Smolka, P., Mikulka, F., Melánová, K., Knotek, P., Humeník, M., Minařík, A., et al. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00081 · Cited by 6
Development of multiparametric bioprinting method for generation of 3D printed cell‐laden structures
Lipshutz, S., Kim, Y., Curtis, M., Friedrich, L. M., & Alimperti, S. (2025) · Biotechnology Progress · doi:10.1002/btpr.70016 · Cited by 6
Polymeric hydrogels for bioprinting: A comprehensive review
Qureshi, M. A., Basree, Aziz, R., Azim, Y., & Ahmad, M. (2025) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2025.100198 · Cited by 6
Luo, Y., Drexler, J. F., Paasche, G., Dräger, G., Zhang, H., Tang, J., Lenarz, T., & Scheper, V. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.147176 · Cited by 6
Tansell, A. V., Mahmoodi, N., Crolla, J. P., Dyson, R., Luo, J., & Thomas-Seale, L. E. J. (2025) · Royal Society Open Science · doi:10.1098/rsos.250504 · Cited by 7
Omidvari, E., Samandari, M., Ghanbariamin, D., Lara, E. C. M., Quint, J. P., Saeedinejad, F., Bouizi, Y., Bouguet‐Bonnet, S., Elkhoury, K., Sánchez‐González, L., et al. (2024) · Biofabrication · doi:10.1088/1758-5090/ad9a01 · Cited by 6
Silk nanocoatings of mammalian cells for cytoprotection against mechanical stress
Hasturk, O., Rodríguez, M. J., Wheeler, J. J., Venoor, V., Sobkowicz, M. J., & Kaplan, D. L. (2021) · MRS Bulletin · doi:10.1557/s43577-021-00114-3 · Cited by 6
Process control of electrospinning artificial fenestrated capillary vessels
Qavi, I., & Tan, G. Z. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111708 · Cited by 6
Luo, Z., Mu, X., & Zhang, Y. S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85430-6.00001-7 · Cited by 6
Pohjola, J., Soukka, T., Jokinen, M., & Stolt, M. (2025) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2025.05.002 · Cited by 5
Sanchez-Rubio, A., Hope, L., Barcelona‐Estaje, E., Jayawarna, V., Williams, J. M., & Manuel, S.-S. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214408 · Cited by 7
Leão, J., Lauermann, C. A., Winck, V. L., Petzhold, C. L., de Andrade, D. F., & Beck, R. C. R. (2025) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2025.126134 · Cited by 5
Zampouni, K., Tsikoudis, S., Biza, T., Andriotis, E. G., Moschakis, T., & Katsanidis, E. (2026) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2026.112752 · Cited by 5
Rheological characterization and print quality studies of gelatin/collagen I/PEGDA hydrogels
Bartholomew, K., & Mahapatro, A. (2024) · International Journal of Polymeric Materials · doi:10.1080/00914037.2024.2391964 · Cited by 6
Kallingal, N., Ramakrishnan, R., & Krishnan, K. (2022) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2022.2145867 · Cited by 5
Meng, L., Zheng, Q., Chen, Y., Chen, C., Zhang, Z., Liu, X., Gong, T., & Liu, Y. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.07.016 · Cited by 5
3D Bioprinting: Shaping the Future of Periodontal Tissue Regeneration and Disease Management
Acharya, J. R., Kumar, S., Girdhar, G. A., Patel, S., Parekh, N. H., Patadiya, H. H., Zinjala, A. N., & Haque, M. (2025) · Cureus · doi:10.7759/cureus.82432 · Cited by 13
Print fidelity metrics for additive manufacturing of cement-based materials
Afarani, H. T., Moser, N. H., Garboczi, E. J., Esfahani, E. N., & Biernacki, J. J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102784 · Cited by 5
Structured Data Storage for Data-Driven Process Optimisation in Bioprinting
Schmieg, B., Brandt, N., Schnepp, V. J., Radosevic, L., Gretzinger, S., Selzer, M. A., & Hubbuch, J. J. (2022) · Applied Sciences · doi:10.3390/app12157728 · Cited by 6
Cianciosi, A., Simon, J., Bartolf‐Kopp, M., Grausgruber, H., Dargaville, T. R., Forget, A., Gröll, J., Jüngst, T., & Beaumont, M. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121145 · Cited by 6
Bom, S., Carvalho, M., Prazeres, P., Santos, C. F., Martins, A. M., Ribeiro, H. M., & Marto, J. M. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.139780 · Cited by 4
ALENEZI, E. E., Kerımoğlu, O., & Uğurlu, T. (2024) · Journal of Research in Pharmacy · doi:10.29228/jrp.743 · Cited by 4
Li, J., Xie, J., Wu, Q., Wu, G., & Men, Y. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162425 · Cited by 4
Pien, N., Bogaert, B., Meeremans, M., Popovici, C.-Ş., Dubruel, P., Schauwer, C. D., & Vlierberghe, S. V. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104850 · Cited by 4
Truong, H.-N., Rodriguez, N., Abaci, A., Guner, G., Young, J., Bilgili, E. A., & Güvendiren, M. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2517811 · Cited by 6
Das, S., Chowdhury, A. R., & Datta, P. (2022) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119221089720 · Cited by 4
Rahman, T. T., Rahman, A. M., Pei, Z., Wood, N., & Qin, H. (2024) · Biomimetics · doi:10.3390/biomimetics9100589 · Cited by 5
Ortega, M. D., Aveyard, J., Abdelgawad, R. M., El-Gendy, R., Ciupa, A., Whetnall, D., Behnsen, J., Poole, R. J., & D’Sa, R. A. (2025) · Biomaterials Science · doi:10.1039/d5bm00440c · Cited by 6
Ismat, M. S., Nawaz, M. H., Aizaz, A., Irfan, M., Elshafie, H., Mubarakali, A., & Rehman, M. A. U. (2025) · Polymer · doi:10.1016/j.polymer.2025.128941 · Cited by 6
Virtual Reality as Tool for Bioprinting Quality Inspection: A Proof of Principle
Gretzinger, S., Schmieg, B., Guthausen, G., & Hubbuch, J. J. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.895842 · Cited by 4
İzbudak, B., Dastjerd, S. A., Dönmez, M., Kocaağa, B., Güner, F. S., & Bal‐Öztürk, A. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00512 · Cited by 3
Metadata
- Authors
- Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J.
- Affiliations
- Virginia Tech - Wake Forest University School of Biomedical Engineering & Sciences (US)
- Wake Forest University Health Sciences (US)
- University of Maryland, College Park (US)
- Rice University (US)
- Corresponding author
- Lee, Sang Jin
- ORCID
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2020-02-19
- Volume
- 12
- Issue
- 2
- Pages
- 022003
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- PMC
- PMC7039534
- OpenAlex
- W3000783277
- Cited by
- 426
- References
- 93
- Citations by year
- 2026: 71 · 2025: 70 · 2024: 75 · 2023: 66 · 2022: 69 · 2021: 54 · 2020: 21
- FWCI
- 4.39
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Biofabrication (publishedVersion, other-oa)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering (1P41EB023833-346 01)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- extrusion-based bioprinting, extrudability, shape fidelity, printing accuracy, tissue engineering scaffolds
- MeSH terms
- Animals, Humans, Tissue Engineering, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
