The DOI matches its Crossref record; 93 of the 93 references it cites were found in a registry or an index.
Assessment methodologies for extrusion-based bioink printability
Open accessAbstract
Extrusion-based bioprinting is one of the leading manufacturing techniques for tissue engineering and regenerative medicine. Its primary limitation is the lack of materials, known as bioinks, which are suitable for the bioprinting process. The degree to which a bioink is suitable for bioprinting has been described as its ‘printability.’ However, a lack of clarity surrounding the methodologies used to evaluate a bioink’s printability, as well as the usage of the term itself, have hindered the field. This article presents a review of measures used to assess the printability of extrusion-based bioinks in an attempt to assist researchers during the bioink development process. Many different aspects of printability exist and many different measurements have been proposed as a consequence. Researchers often do not evaluate a new bioink’s printability at all, while others simply do so qualitatively. Several quantitative measures have been presented for the extrudability, shape fidelity, and printing accuracy of bioinks. Different measures have been developed even within these aspects, each testing the bioink in a slightly different way. Additionally, other relevant measures which had little or no examples of quantifiable methods are also to be considered. Looking forward, further work is needed to improve upon current assessment methodologies, to move towards a more comprehensive view of printability, and to standardize these printability measurements between researchers. Better assessment techniques will naturally lead to a better understanding of the underlying mechanisms which affect printability and better comparisons between bioinks. This in turn will help improve upon the bioink development process and the bioinks available for use in bioprinting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Among the available techniques, extrusion-based bioprinting is the most widely used owing to its versatility and compatibility with hydrogel-based bioinks [4,5,6].”
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Although the spreading ratio (Figure 6D) tended to decrease with increasing MMT concentration, no statistically significant differences were observed among the formulations (one-way ANOVA, p = 0.117) [6,7].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [6]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Self-citation25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,818
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D. M., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,168
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Vlierberghe, S. V., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,129
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. M. Q. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,073
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,052
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,005
Research works printed but not linked: 2
- Kraut, 2017, Influence of shear thinning and material flow on robotic dispensing of poly(ethylene glycol) diacrylate/poloxamer 407 hydrogels, J. Appl. Polym. Sci., 134, 45083, 10.1002/app.45083 · DOI
- Sarker, 2017, Modeling the flow behavior and flow rate of medium viscosity alginate for scaffold fabrication with a three-dimensional bioplotter, J. Manuf. Sci. Eng., 139, 081002, 10.1115/1.4036226 · DOI
Cited by
Sorted by citations
Items 301–400 of 424
Meng, L., Li, H., Hao, X., Wu, T., Zhou, J., Chen, Y., Zheng, Q., Cao, X., Wang, J., Liu, X., et al. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114731 · Cited by 3
Plant-based edible emulsion gels from rye secalin for 3D-printed fat mimetics
You, S., Wen, W., Wan, Y., Su, L., Zeng, S., Kong, Y., Fu, C., Huang, D., & Jing, L. (2025) · Food Research International · doi:10.1016/j.foodres.2025.117925 · Cited by 3
Bioprinting Organs—Science or Fiction?—A Review From Students to Students
Murenu, N., Mussoni, C., Mier, M. S. A., Büttner, P., Chicaiza-Cabezas, N. A., Dai, Y. R., Faber, J., Fiedler, M., Lamberger, Z., Ng, X. J., et al. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502103 · Cited by 3
AI-driven interpretation and prediction of embedded printability based on rheology
Zhou, X., Zhang, Z., Yu, J., Ma, L., Ma, S., Wu, B., Wang, Z., Zhang, T., Fang, Y., & Xiong, Z. (2026) · Bio-Design and Manufacturing · doi:10.1631/bdm.2500456 · Cited by 3
Ortega, M. A., León-Oliva, D. D., Boaru, D. L., Fraile‐Μartinez, O., Montero, C. G., Casanova, C., García‐Honduvilla, N., Buján, J., Sáez, M. A., Álvarez‐Mon, M., et al. (2025) · PubMed · doi:10.14670/hh-18-763 · Cited by 3
Extrusion‐Based Printing of Nanostructured Fatty Acid Gels Incorporated in Hydrogels
Amirfattahi, S., Freeman, C. J., Honaryar, H., Ghazali, H. S., Kim, K., & Niroobakhsh, Z. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57328 · Cited by 3
Murenu, N., Faber, J., Soufivand, A. A., Buss, M., Schaefer, N., & Budday, S. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202500204 · Cited by 3
Evaluation of allylated gelatin as a bioink supporting spontaneous spheroid formation of HepG2 cells
Kripamol, R., Velayudhan, S., & Kumar, P. R. A. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.133259 · Cited by 3
Zia, M. K., Akdag, Z., Asghar, A., Celik, S., Duman, K., Bari, T., Ulağ, S., Dogan, C., Gündüz, O., & Ikram, F. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.106826 · Cited by 3
Overview of Injectable Hydrogels for 3D Bioprinting and Tissue Regeneration
Janarthanan, G., & Noh, I. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781839163975-00001 · Cited by 4
Costa, J. B., Silva‐Correia, J., Reis, R. L., & Oliveira, J. M. (2021) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2021-0007 · Cited by 3
Pössl, A., Hartzke, D., Schlupp, P., & Runkel, F. (2021) · Applied Sciences · doi:10.3390/app12010326 · Cited by 3
Nanotechnology Applied to Personalized 3D Dressings for Diabetic Feet
Tejada, G., Castro, G. R., & Álvarez, V. A. (2022) · Springer eBooks · doi:10.1007/978-981-16-8698-6_45 · Cited by 3
Cheli, L., Bonini, M., & Tonelli, M. (2024) · Applied Sciences · doi:10.3390/app14114410 · Cited by 2
Nguyen, D., Phan, N. T. H., & Tran, H. L. B. (2024) · Advanced Biomedical Engineering · doi:10.14326/abe.13.293 · Cited by 2
Palaniappan, A., Ramesh, P., Maya, B., & Shyam, R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29260-6.00016-0 · Cited by 3
da Fonsêca, J. H. L., Corzo, I. J. M., Azoubel, R. A., Tavares, R. P., Carvalho, V. M., Teixeira, S., Dávila, J. L., & d’Ávila, M. A. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00446 · Cited by 4
Vanlauwe, F., Witte, T. D., Shamieva, S., Dermaux, C., Cleyman, A. N. A., Vlierberghe, S. V., & Blondeel, P. N. (2025) · Biofabrication · doi:10.1088/1758-5090/ae1e31 · Cited by 2
A critical review of 3D-printed alginate-based materials for biomedical applications
Yadav, K., Singhwane, A., Chaturvedi, K., Mohapatra, R. K., & Verma, S. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06033-6 · Cited by 2
Bharadwaj, T., Chrungoo, S., Jenamani, A. N. D. S., Pradhan, S. S., & Verma, D. K. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124791 · Cited by 3
Ke, D. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00459 · Cited by 6
Amini, M., Hosseini, H., Hashemi, S. A., & Arjmand, M. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202501324 · Cited by 3
Beyond graphene: the MXene era in bioprinting
Gutthedhar, M., Hazarika, K., Kumawat, V. S., Raviraja, N. S., Ghosh, S. B., Vasanthan, K. S., & Ghosh, S. N. (2026) · BioMedical Engineering OnLine · doi:10.1186/s12938-026-01520-x · Cited by 2
System-level multi-stage modeling and multi-criteria optimization of direct ink writing
Chen, W., Xu, C., Liang, L. H., Zhou, C., & Sun, H. (2026) · Additive manufacturing · doi:10.1016/j.addma.2026.105122 · Cited by 2
Woelken, L., Bäther, S., Dehmlow, K., Agudo, J. A. R., Wu, D., Kurreck, J., Wagemans, A. M., & Rauh, C. (2026) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2026.112694 · Cited by 2
Modulating 3D-printability with nanocellulose hydrogels
Ara, Z. A., More, R. V., Garnier, G., & Batchelor, W. J. (2026) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2026.140350 · Cited by 2
Uncertainty-aware neural networks for autonomous real-time correction in bioprinting
Bu, F., Ma, C., Wang, M., Yu, Z., Zheng, P., Chi, L., Xue, L., Jiang, Q., Li, L., & Zhu, L. (2026) · Additive manufacturing · doi:10.1016/j.addma.2026.105185 · Cited by 2
3D bioprinting for reproducing the tumor microenvironment in cancer research models
Aoun, J., Oliveira, H., Fennell, S., Diab-Assaf, M., Caldefie‐Chezet, F., & Delort, L. (2026) · Current Research in Biotechnology · doi:10.1016/j.crbiot.2026.100385 · Cited by 5
Xuanhao, L., Jing, Z., Xu, B., Yang, X., Wang, Y., Zhi, H., Bin, L., & Song, F. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.215079 · Cited by 2
Gauthaman, A., Krishnan, A., Anju, M. S., Thomas, L. V., Kasoju, N., & Bhatt, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90514-5.00013-4 · Cited by 2
3D printable phantom for mimicking electrical properties of dermal tissue
Kuzemchak, B. C., Choe, R. H., Sherry, M., Porter, E., & Fisher, J. P. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37516 · Cited by 2
Self-citationApplicability of machine learning in three-dimensionally (3D) printed dosage forms
Thakkar, R., Pillai, A. R., Kulkarni, V. R., & Maniruzzaman, M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89925-3.00010-1 · Cited by 2
Personalized Reconstruction with Three-dimensional Printed Urological Tissue Constructs
Lee, S. J. (2024) · European Urology Focus · doi:10.1016/j.euf.2024.01.006 · Cited by 2
Self-citationShetty, S. K., Shyam Sundar, S., Padurao, S., & Dasharatharao, P. M. (2024) · ACS Omega · doi:10.1021/acsomega.3c08112 · Cited by 2
Lee, S. H., Noh, S., Pack, S. P., Kim, G., & Lee, H. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114556 · Cited by 2
Self-citationImprovement of Mechanical Properties of 3D Bioprinted Structures through Cellular Overgrowth
Wierzbicka, A., Bartniak, M., Grabarczyk, J., Biernacka, N., Aftyka, M., Wójcik, T., & Bociąga, D. (2024) · Applied Sciences · doi:10.3390/app14198977 · Cited by 1
Rangel-Garcia, A. M., Torres, L. M., Manero, O., Alvarez-Perez, M. A., & Barba, M. C. P. (2026) · Korea-Australia Rheology Journal · doi:10.1007/s13367-025-00148-y · Cited by 1
Gobinath, V. M., Vellaichamy, P., Munuswamy, N. B., Subbiah, G., Kamakshi Priya, K., & Hephzipah, J. J. (2026) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-025-00557-z · Cited by 1
Borgia, C., Gagliardi, F., Gabriele, D., Ambrogio, G., & Filice, L. (2026) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-026-0267-0 · Cited by 1
Jongprasitkul, H., Parihar, V. S., Turunen, S., Kellomäki, M., Ferreira, A. M., & Fulton, D. A. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00480 · Cited by 4
Ozonation as a green modification for potato and cassava starches in 3D-printed bone scaffolds
Araújo, R. N., de Nóbrega, F. C., de Aguiar, S. B., de Melo, M. T., & Maniglia, B. C. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.152081 · Cited by 1
Bernat‐Just, L., Ta, P. L., Sebastián-Morelló, M., Rodilla, V., López‐Castellano, A., & Alambiaga‐Caravaca, A. M. (2026) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2026.107541 · Cited by 1
In Situ Programming of Shape-Morphing Hydrogels via Vat Photopolymerization for 4D Bioprinting
Guida, L., Ciotti, E., Venturelli, G., Bagatella, S., Cavallaro, M., & Levi, M. (2026) · Gels · doi:10.3390/gels12050382 · Cited by 1
Zhang, C., Elvitigala, K. C. M. L., & Sakai, S. (2026) · Virtual and Physical Prototyping · doi:10.1080/17452759.2026.2671497 · Cited by 1
Madar, I. H., Pawar, J., Muruganantham, P., Ahmed, S. S., Vohra, V., & Velayudam, J. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1854783 · Cited by 1
Annurakshita, S., Jongprasitkul, H., Niemelä, M., Turunen, S., Kalpio, T., Fulton, D. A., Kellomäki, M., & Parihar, V. S. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.153330 · Cited by 1
Zhou, Q., Xiao, D., Li, R. K., Yang, W. Z., Wang, J., Wang, Y., Jia, W., Zhou, Y., & Lu, W. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125656 · Cited by 1
Kumari, M., Mishra, A., Dutta, S., Paul, U., Ranjan, S., Sainger, S., Chikara, A., Jaipal, P., Gujjar, S., Phalak, M., et al. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00499 · Cited by 1
Khrustaleva, A., Yedrissov, A., Khrustalev, D. P., Chernykh, I. V., Самородов, А. В., AKHMETOVA, S., Savelyev, A., Kiikbayev, M., Rusyaeva, P., Kazantsev, V., et al. (2026) · Pharmaceutics · doi:10.3390/pharmaceutics18091055 · Cited by 1
Janarthanan, G., Thambi, T., Hong, S., & Noh, I. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781839163975-00021 · Cited by 1
Asohan, A. W., Jasme, N., Kahar, N. N. F. N. M. N., Bustami, Y., & Hamid, Z. A. A. (2023) · Springer eBooks · doi:10.1007/978-981-99-2267-3_13 · Cited by 1
Chen, X., Hu, H., Li, Y., Yue, W., Zhang, X., Shen, D., Ma, W., Xing, P., Zhang, Y., & Guan, T. (2024) · PubMed Central · doi:10.7507/1002-1892.202403001 · Cited by 1
How can we solve the problem of bioprintability to overcome the bioprinting challenges?
Mosnier, A., Halima, I., & Courtial, E. (2024) · MRS Bulletin · doi:10.1557/s43577-024-00755-0 · Cited by 1
Tripathi, S., Ansari, A. A., Dash, M., Jain, P. K., Singh, H., Ramakrishna, S., & Nanda, H. S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-16168-1.00017-9 · Cited by 1
Duvert, L., Casanova, A., Al‐Kattan, A., Testa, S., Magdinier, F., & Alloncle, A. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202402478 · Cited by 1
Nicolae, C.-V., Kadousaraei, M. J., Olăreț, E., Serafim, A., Aydin, M. S., Bogdan, I.-T., Bratu, A. E., Ginghină, R. E., Dobranici, A., Dinescu, S., et al. (2025) · Materials · doi:10.3390/ma18174131 · Cited by 1
Ratheesh, G. (2021) · Queensland University of Technology · doi:10.5204/thesis.eprints.210168
Antunes, B. S. L., Pedrini, F., Komatsu, D., Asami, J., Dicko, C., & Duek, E. A. R. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.154129
3D Printing of Hydrogel Constructs Toward Targeted Development in Tissue Engineering
Cernencu, A. I. (2021) · Gels horizons: from science to smart materials · doi:10.1007/978-981-16-4667-6_3
Nanotechnology Applied to Personalized 3D Dressings for Diabetic Feet
Tejada, G., Castro, G. R., & Álvarez, V. A. (2021) · Springer eBooks · doi:10.1007/978-981-15-6453-6_45-1
Recent Advancement in Biological Sciences
(2021) · Lincoln Research and Publications Limited, Australia in Collaboration with Lincoln University College, Malaysia eBooks · doi:10.31674/book.2021.rabs
Balaji, K. V., Bhutoria, S., Nayak, S., Anil Kumar, P. R., & Velayudhan, S. (2022) · Research Square · doi:10.21203/rs.3.rs-1508651/v1
Sbrana, F. V., Ribezzi, D., Farè, S., & Scielzo, C. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85430-6.00003-0
3D Printing In The U.S. Medical Field: An Exploration of Benefits, Costs, and Future TrendsPreprint
Thelwell, L. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4146857
Rational Design of Materials for 3D Bioprinting of Bioinks for Fabricating Human Tissues
Kaunas, R. R. (2022) · ASM International eBooks · doi:10.31399/asm.hb.v23a.a0006904
Theoretical methods for the optimization of 3D bioprinting
Neagu, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-818653-4.00007-3
Modular Enzyme-Responsive Polysaccharide-Based Hydrogels for Biofabrication
Naeimipour, S. (2023) · Linköping studies in science and technology. Dissertations · doi:10.3384/9789180750349
[Embedded 3D printing of porous silicon orbital implants and its surface modification].
Zhao, H., Wang, Y., Wang, Y., Gong, H., Yinjun, F., Cui, X., Zhang, J., & Huang, W. (2023) · PubMed Central · doi:10.12122/j.issn.1673-4254.2023.05.14
Shi, H., Li, Y., Xu, K., & Yin, J. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4458412
Basics of 3D Bioprinting Extrusion Process
Daguano, J. K. M. B., Rodas, A. C. D., Santos, K. F., Santos, C. C., & da Silva, J. V. L. (2023) · Springer eBooks · doi:10.1007/978-3-031-38743-2_11
Controlling Factors of Bioprinting
Sreedharan, M., Gouripriya, D. A., Deb, A., Grohens, Y., Kalarikkal, N., Saha, P., & Thomas, S. (2024) · doi:10.1002/9781119894407.ch11
Biomimetic injectable hydrogels of gelatin and hyaluronic acid for hepatic cell culture
Rodríguez-Fernández, J. (2024) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/207128
Duvert, L., Casanova, A., Al‐Kattan, A., Testa, S., Magdinier, F., & Alloncle, A. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4952582
Additive manufacturing and criteria to fabricate bioinks
Iqubal, M. K., Shaikh, R., Dongala, B. P., Pansare, S. J., Thota, S. K., Charoo, N. A., Mohamed, E. M., Khan, M. A., & Rahman, Z. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-27378-0.00011-8
Xu, C., Xu, Y., Zhang, L., Zhou, X., Liu, Q., & Ren, L. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5396906
Bioprinting-A New Approach for Tissue Engineering: An Overview
Yadav, A. K., Dash, S., & Bhattacharyya, S. (2025) · Springer Proceedings in Materials · doi:10.1007/978-981-96-5856-5_37
Multifunctional scaffolds based on 3D printing for spinal cord and peripheral nerve defect repair
Chen, X., Wu, M., Zhang, J., Yang, P., Guo, J., Gu, X., & DAI, X. H. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.169111
A Review on Decellularized Extracellular Matrix‐Based 3D Printing for Meniscus Regeneration
Thirumalai, D., Janani, N., Vivek, S., Biju, S., & Kundanati, L. (2025) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbmb.70003 · Cited by 1
Development of Biomacromolecule-Based Bioinks for Corneal Substitutes Preparation with High Fidelity
Jiang, L., Zhu, J., Zhang, W., & Li, X. (2025) · 3D Printing and Additive Manufacturing · doi:10.1177/23297662251400145
Hernández, C. I. V., & Sánchez‐Arévalo, F. M. (2026) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-032-13722-7_8
Ghani, R., & Shahid, Z. (2026) · IGI Global eBooks · doi:10.4018/979-8-3373-6234-2.ch001
Du, M., Tronci, G., Yang, X. B., & Wood, D. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17020090
Singh, S., Wei, L., Samiei, E., Gaber, K., Gao, Q., Persad, A. H., Veres, T., & Günther, A. (2026) · Biofabrication · doi:10.1088/1758-5090/ae4ccd · Cited by 1
Ardaneh, F., Immonen, E., Chaudhari, A., Pelkonen, J., & Prakash, D. R. (2026) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwag027 · Cited by 1
Advances in carbon-based bioinks for bioprinting: Rheology, printability, and applications
Bartholomew, K. (2026) · Advanced carbon journal. · doi:10.62184/acj.jacj1000202524
Babaei, M., Mehdikhani, M., Huri, P. Y., Oto, Ç., Poursamar, S. A., & Rafienia, M. (2026) · Emergent Materials · doi:10.1007/s42247-026-01376-w
Kashi, M., Nazarpak, M. H., & Nourmohammadi, J. (2026) · International Journal of Polymeric Materials · doi:10.1080/00914037.2026.2643209
Direct Ink Writing of Biodegradable Elastic Scaffolds via Rapid Thiol-Acrylate Photocrosslinking
Li, X.-Y., Li, C.-G., Chen, K., Xiao, Y., Li, X.-X., & Lang, M.-D. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3582-0
Utami, S. S., Park, H., Kim, J., Sung, A., Choi, M.-J., Ryoo, G.-H., Gal, C. W., Kim, I., Yun, H., & Choi, Y. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.103135
Spessot, E., Soliman, M. A. N., Campoli, D., Khedr, A., Pascolo, G., Motta, A., Maniglio, D., Elsawy, M. A., & Tirella, A. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.102095
Volumetric Control vs. Pneumatic Pressure: A Comparative Analysis of Extrusion in 3D Bioprinting
Cristea, D., Liciu, E., Trifan, A., & Bălan, C. (2026) · Micromachines · doi:10.3390/mi17050521
3D-printing of dual-green-crosslinked polyvinyl alcohol-based hydrogels for antibacterial wound care
Kaviani, A., Peiravi, M., Askarzadeh, N., Bagherzadeh, E., & Sherafat, Z. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.115358
3D and 4D Bioprinting Applications in Plastic Surgery
Fan, X., Li, S. S., Dan, X., Chen, H., Fang, B., Ju, Y., Lei, L., & Li, Y. (2026) · Springer handbooks · doi:10.1007/978-3-032-01636-2_26
Machine learning approaches for optimizing bioprinting processes: A comprehensive review
Jaya, S. V., Chekkaramkodi, D., & Butt, H. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.103245 · Cited by 1
Yin, X., Hao, J., Liu, S., & Lu, Y. (2026) · Additive manufacturing · doi:10.1016/j.addma.2026.105251
Tomographic volumetric bioprinting: from bioink design to resolution enhancement
Wu, Q., He, C., Qiao, T., Chen, Y., Shen, H., & He, Y. (2026) · Bio-Design and Manufacturing · doi:10.1631/bdm.2500260
Polysaccharide Hydrogel-Based 3D Printing Technology
Yamin, M. H., Kanwal, Q., Rasool, M. M., Malaika, Hanif, M., & Hamza, M. (2026) · Springer eBooks · doi:10.1007/978-3-032-26154-0_2
Metadata
- Authors
- Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J.
- Affiliations
- Virginia Tech - Wake Forest University School of Biomedical Engineering & Sciences (US)
- Wake Forest University Health Sciences (US)
- University of Maryland, College Park (US)
- Rice University (US)
- Corresponding author
- Lee, Sang Jin
- ORCID
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2020-02-19
- Volume
- 12
- Issue
- 2
- Pages
- 022003
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- PMC
- PMC7039534
- OpenAlex
- W3000783277
- Cited by
- 426
- References
- 93
- Citations by year
- 2026: 71 · 2025: 70 · 2024: 75 · 2023: 66 · 2022: 69 · 2021: 54 · 2020: 21
- FWCI
- 4.39
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Biofabrication (publishedVersion, other-oa)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering (1P41EB023833-346 01)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- extrusion-based bioprinting, extrudability, shape fidelity, printing accuracy, tissue engineering scaffolds
- MeSH terms
- Animals, Humans, Tissue Engineering, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
